Renovation in Custom House

Room No. 03

Supplying and fixing work stations of suitable sizes made of 17mm thick both side prelaminated exterior grade HDF boards table top supported on 60mm thick partitions made of 2 numbers 7.5mm thick both side prelaminated HDF boards fixed on exterior grade marine ply wood frames 45mmx 45mm allround and vertical supports at spacing not exceeding 60cm centre to centre or 17mm thick both sides prelaminated HDF boards where ever required as shown in the drawing, as shown in the drawing with the following components .

Table top with 17mm thick HDF both side prelaminated exterior grade board .

Box type partions of 60mm thick of 1200mm height made of 7.5mm thick HDF both side prelaminated exterior grade board fixed on both side of exterior grade marine ply wood frame 45mmx45mm size.

17mm thick HDF Both side prelaminated exterior grade board verticals 750mm height for table top support.

2nos Keyboards with 17mm thick HDF both side prelaminated exterior grade board, sliding type 800mm x 400mm size with necessary fittings such as sliders, side supports etc. complete.

Two sets of 'Drawers width 450mm and length equal to the width of table limited to 600mm made of 17mm thick HDF bothside prelaminated exterior grade board fixed with three numbers horizontal shelves. Drawers fixed with stainless steel telescopic sliders fixed on both sides. Inner three sides are 160mm high and face cover to cover outer vertical supports and bottom and top shelf thickness including fixing 100mm stainless steel handle and 40mm chromium plated brass cupboard lock of approved make and brand.

Two sets of electrical fittings of approved make and quality consisting of four number switches and four number sockets fixed on 14"x4"(35mmx100mm) PVC box type switch board of GM or equivalent quality or Legrand mylink modular type including wiring with polycab 1.5 sqmm cables, three numbers telephone sockets and wiring with two pair telephone cables, and wiring with CAT 6 cables for net connection ,all laid in 20mm dia PVC conduits inside partitions.

All visible edges of boards and partitions shall be fixed with 3mm thick PVC edge bands of suitable width having same shade and colour of partition / table top.

1600mm x 1338mm size (wall side)

1600mm x 1338mm size (middle of room)

2735mm x 1600mm

File rack made of 17mm thick bothside pre laminated exterior grade HDF board with horizontal shelves at an average spacing of 500mm and verticals fixed at an average spacing of 450mm including providing and fixing both side prelaminated exterior grade 17mm thick HDF board sliding shutters with necessary fittings such as E type aluminium sliding channel,stainless steel rollers etc complete with backing of 7.5mm thick HDF prelaminated board as directed by the Officer-in-charge.

Length 3800mm, width 500mm and height 2100mm

Providing and laying polycab 1.5sq.mm cables from work station to main switch board including covering the cable with PVC capping of suitable colour.

Providing and laying polycab 3sq.mm cables from power socket to main switch board including covering the cable with PVC capping of suitable colour.

Providing and fixing 15A power plug socket , switch with suitable PVC box type switch board of GM or equivalent quality or Legrand mylink modular type including wiring with 3sqmm cables and connecting to the existing nearest power supply point.

Providing and laying suitable CAT6 cable from the work station to the existing cable connection including covering with PVC capping of suitable colour.

Providing and laying antiskid vitrified tiles 600mm x 600mm size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS 15627 of approved make like Johnson,Khajaria,Asian,Somany, in all colur and shade with cement based high polymer modified quick set tile adhesive (water based) confirming to IS:15477 in average 6mm thick including grouting the joints of flooring tiles of 3mm width using epoxy grout mix of 0.70kg of organic coated filler of desired shade. ( Room size of 6.85m x 6.50m and 4.65m x 3.10m m including 0.15 m skrting ).

Wall painting with premium acrylic emulsion paint of interior grade having VOC content less than 50 g/ l of approved brand and manufacture, including applying additional coat whereever required to achieve an even shade and colour including removing the existing painting by scrubbing and cleaning the surface and finishing the wall with a coat of interior putty and apply priming coat as required as directed by officer incharge (Room size 6.85m x 6.50m and 4.65m x 3.10m . walls and ceiling).

Providing and applying touch wood clear/enamel paint of required colour and shade to have a polished surface with paint of approved quality and make on wood work including removing the existing paint by scrubbing and cleaning and applying necessary primer and ceiling coat including polishing the brass fitting etc complete as directed by the officer in charge.

Door (1200x2400 size)

Window (1200x1650 size)

Providing water proofing treatement on sunshade and walls in four layers after scrubbing and cleaning the existing surface. (1) First layer of slurry of 0.50kg cemennt and 0.25 kg water proofing compound per sqm (2)Second layer of fibre glass cloth when the first layer is still green .(3)Third layer of 1.5mm slurry of 1.30kg cement and 0.67 water proofing compound and 1.30kg coarse sand per sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours (4) 12 mm thick cement plaster 1:3 (1 cement: 3 sand) finished smooth.The treatement shall be done for an area 30cm beyond the leakage portion and water cured for 7 days.Sunshade of window and ventilator and adjucent wall.

Providing and fixing LED light fitting of approved quality and make such as philips, luker or equivalent including connecting the wiring from existing powerpoint upto a length of 1m.

Removing the existing fan and servicing the same and refixing including wiring for connecting to existing powerpoint upto a length of 1m and replacing the fan rod of required length.

Removing and relaying cable of electrical/ data etc laid on floors and walls to the required position at all height including replacing damaged conduit pipe with suitable size as directed by the officer incharge. (Item will be operated if required)

Room No. 09

Supplying and fixing work stations of suitable sizes made of 17mm thick both side prelaminated exterior grade HDF boards table top supported on 17mm thick both sides prelaminated HDF boards as shown in the drawing.

Work station 3200mmx3000 mm size made by joining existing wooden tables of 1800mmx1200mm and 1970mm x 1200mm with corner table of 1200mm x 1230mm and side table of 600mm x 1100mm.

Table top with 17mm thick HDF both side prelaminated exterior grade board.

60mm thick prelaminate HDF partition 750mm high (specification same as for item number 6 ).

4mm Thick wooden venner of matching shade of approved make on existing table top and outer side.

17mm thick HDF Both side prelaminated exterior grade board for table top vertical support.

2nos Keyboards with 17mm thick HDF both side prelaminated exterior grade board, sliding type 600mm x 400mm size with necessary fittings such as sliders, side supports etc. complete.

Drawers two sets of 500mmx600mm each set made of 17mm thick HDF bothside prelaminated exterior grade board fixed with three numbers horizontal shelves. Drawers fixed with stainless steel telescopic sliders fixed on both sides. Inner three sides are 160mm high and face cover to cover outer vertical supports and bottom and top shelf thickness including fixing 100mm stainless steel handle and 40mm chromium plated brass cupboard lock of approved make and brand.

Two sets of electrical fittings of approved make and quality consisting of four number switches and four number sockets fixed on 14"x4"(350mmx100mm) PVC box type switch board of GM or equivalent quality or Legrand mylink modular type including wiring with polycab 1.5 sqmm cables, three numbers telephone sockets and wiring with two pair telephone cables, and wiring with CAT 6 cables for net connection, all laid in 20mm dia PVC conduits inside partitions.

All visible edges of boards and partitions shall be fixed with 3mm thick PVC edge bands of suitable width having same shade and colour of partition / table top.

Providing and laying polycab 1.5sq.mm cables from work station to main switch board including covering the cable with PVC capping of suitable colour.

Providing and laying polycab 3sq.mm cables from power socket to main switch board including covering the cable with PVC capping of suitable colour.

Providing and fixing 15A power plug socket , switch with suitable PVC box type switch board of GM or equivalent quality or Legrand mylink modular type including wiring with 3sqmm cables and connecting to the existing nearest power supply point.

Providing and laying suitable CAT6 cable from the work station to the existing cable connection including covering with PVC capping of suitable colour.

Providing and fixing 60mm thick partions made of two numbers 7.5mm thick both side prelaminated HDF boards fixed on marine plywood exterior grade 40mmx45mm frame work alround and vertical supports at spacing not exceeding 600mm and horizontal supports at spacing not exceeding 900mm including fixing with steel clamps to floors,walls,ceiling where ever necessary and as directed by the Officer in charge. Size 4500x2100mm with opening 700mmx2100mm for door.

35mm thick flush door sliding type shutter made of 7.5mm thick bothside prelaminated exterior grade HDF board fixed on both sides of mahagony or equivalent wooden frame 20mmx45mm size frame work with horizontal and vertical at 600mm centre to centre including fixing with approved quality stainless steel fitting for sliding the shutter as approved by the officer in charge (size 700mm x 2100mm)

Repairing existing window frame and shutters with first quality country wood like anjaly / pincoda including fixing 4mm thick glass panes where ever required as directed by the Officer in charge.

Wall painting with premium acrylic emulsion paint of interior grade having VOC content less than 50 g/ l of approved brand and manufacture, including applying additional coat whereever required to achieve an even shade and colour including removing the existing painting by scrubbing and cleaning the surface and finishing the wall with a coat of interior putty and apply priming coat as required as directed by officer incharge (Room size 6300mmx4500mm -walls and ceiling).

Providing and applying touch wood clear/enamel paint of required colour and shade to have a polished surface with paint of approved quality and make on wood work including removing the existing paint by scrubbing and cleaning and applying necessary primer and ceiling coat including polishing the brass fitting etc complete as directed by the officer in charge.

Door (1200x2400 size)

Window (1200x1650 size)

Providing and fixing white vitrious china wash basin 550mmx400mm size with 15mm CP brass pillar tap, 32mm waste coupling and pipe,C.I. brackets including connecting and laying water supply line 20 mm UPVC pipe up to a length of 5mtr and 65mm dia UPVC drainage pipe up to a length of 5mtr including cutting and making good the walls and painting etc. complete.

Supplying and fixing Dining table of size 1200mmx900mm made of both side prelaminated HDF board of exterior grade with vertical side supports 750mm height 900mm wide at both ends including fixing with necessary clamps and finishing the edges with matching edge bands etc. complete.

Providing water proofing treatement on sunshade and walls in four layers after scrubbing and cleaning the existing surface. (1) First layer of slurry of 0.50kg cement and 0.25 kg water proofing compound per sqm (2)Second layer of fibre glass cloth when the first layer is still green .(3)Third layer of 1.5mm slurry of 1.30kg cement and 0.67 water proofing compound and 1.30kg coarse sand per sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours (4) 12 mm thick cement plaster 1:3 (1 cement: 3 sand) finished smooth.The treatement shall be done for an area 30cm beyond the leakage portion and water cured for 7 days.Sunshade of window and ventilator and adjacent wall.

Providing and fixing LED light fitting of approved quality and make such as philips, luker or equivalent including connecting the wiring from existing powerpoint upto a length of 1m.

Removing the existing fan and servicing the same and refixing including wiring for connecting to existing powerpoint upto a length of 1m and replacing the fan rod of required length.

Removing and relaying cable of electrical/ data etc laid on floors and walls to the required position at all height including replacing damaged conduit pipe with suitable size as directed by the officer incharge.

Providing and fixing File rack made of 17mm thick bothside pre laminated exterior grade HDF board with horizontal shelves at an average spacing of 500mm and verticals fixed at an average spacing of 450mm and backing with 7.5mm thick both side prelaminated exterior grade HDF board including providing and fixing both side prelaminated exterior grade 17mm thick HDF board sliding shutters with necessary fittings such as E type aluminium sliding channel,stainless steel telescopic rollers etc complete as directed by the Officer-in-charge.

Length 1200mm, width 500mm and height 2100mm

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing standard CP brass towel rod 610 mm long of approved quality confirming to IS standards including fixing with CP brass screws etc. complete.

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible and re plastering the peeled off portions with cement mortar 1:4 (1 cement : 4 sand ) complete in all respect as per the direction of Officer-in-Charge.(Wall area 6.5m x 3.60m)