Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.9 LAccepted-AOC NO 1 HPPWD DIVISION DHARAMSHALA HIMACHAL PRADESH | L1 | Accepted-AOC Lowest contractor | |
| 2 | L2₹46.2 L+₹4.6 L (11.1%)Rejected-Finance R O VILL PO GAGGAT TEHSIL DISTT KANGRA H P | KANGRA | HIMACHAL PRADESH | 175013 | L2 | Rejected-Finance L2 Bidder | |
| 3 | L3₹46.5 L+₹4.8 L (11.6%)Rejected-Finance HIMACHAL PRADESH HP | HAMIRPUR | HIMACHAL PRADESH | 174304 | L3 | Rejected-Finance L3 Bidder |
Tender Value
₹29.8 L
EMD Value
₹59,600
Closing Date
9 Aug 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
HIMUDA Division Dharamshala
Including internal and external WS and SI and development of site Balance work
2022_HIMUD_63147_1
HIMUDA/DD/CB/W-7/2684-2708
Open Tender
Civil Works
Item Rate
180 days
Dharamshala Distt Kangra
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,500
Yes
₹59,600
Yes
21 Sept 2022
27 Jul 2022
10 Aug 2022
27 Jul 2022
9 Aug 2022
27 Jul 2022
27 Jul 2022 - 9 Aug 2022
Amount
Cutting in earth work in all heights/depths in all kinds of soil such as kankar, moorum, single and decomposed or soft rock, hard rock i.e. their intermediate classifications and chiselling/wedging out of rock where blasting is prohibited including saturated soils & filling embankments etc.where necessary & disposal of exacavated unserviceable material in all leads and lifts including through mechnically transporation, the disposal of unserviceable material will be done on aproved dumping site. Any damage to the private/public property during execution will be restored by the contractor what so ever the nature of the same may be. The serviceable material will be stacked in specified dimensions in all leads & lifts as per the direction of the Engineer-in-charge
Excavation in foundations, trenches etc. in earth work in all kinds of soils such as pick work, jumper work and chiselling / wedging out of hard or soft rock where blasting prohibited up to all depths stacking the excavated soil not more than 3 meteres clear from the edge of excavation and then returning the stacked soil in 15 cms layers, when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer-in- charge.
Filling in plinth with sand under floors including watering , ramming , consolidating and dressing complete including cost of sand including carriage of material in all leads & lifts.
Providing form work with steel plates 3.15mm thick welded with angle iron frames 30x30x5mm so as to give a fair finish including centering, shuttering, strutting and propping, etc. with wooden battens and ballies heights of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of material in all leads & lifts.
Foundation, footing bases of columns etc. and mass concrete.
Flat surfaces such as soffits of suspended floors, roofs inluding inclined surfaces up to any degree, landings and the like:(i) Floors, etc. upto 200 mm in thickness.
Column pillar, posts and struts square, rectanagular or polygonal in plan.
Beams, cantilevers, girders and lintels sides and soffits of beams, small ends of beams,beam haunching, cantilivers, girders, bressumers and lintels not exceeding 1 metre in depth.
Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses , plinth and string courses and the like.
Providing and laying cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete on slab and floor excluding cost of form work in foundation and plinth including carriage of material in all leads & lifts.
Providing and laying cement concrete 1:5;10 (1cement :5sand :10 graded stone aggregate 40mm. nominal size) with 15 % plum and curing complete excluding cost of form work in retaining walls/ Breast walls, the size of plums shall usually be 150mm. to 300mm. as per H.P.P.W.D.Specification including carriage of material in all leads & lifts.
Providing and laying cement concrete having strength of M-20 mixed design aggregate mechanically mixed and vibrated and curring complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of material in all leads & lifts.
Foundations, footings, bases of column and the like and mass concrete.
Suspended floor, roofs, landings, shelves and their support, balconies, beams, girders, bressumers and cantilevers in all heights.
Column, pillars, posts and struts upto all heights
Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) reinforced concrete chajjas not exceeding 10 cm. thickness upto floor two level including finishing the exposed surfaces with cement mortar 1:3 (1cement : 3 Sand) to give a smooth and even surface centring / form work and curing complete excluding the cost of reinforcement including carriage of material in all leads & lifts.
Providing Tor steel/TMTsteel reinforcement for R.C.C. work including bending,binding and placing in position complete including cost of binding wire including carriage of material in all leads & lifts.
Applying cement slurry on RCC slab or cement concrete work using 2.75 kg. of cement per sqm.of floor area before laying cement concrete flooring including roughening, cleaning, of the concrete surface complete including carriage of material in all leads & lifts.
Providing throating, or plaster drip and moulding to RCC chajjas etc including carriage of material in all leads & lifts.
Providing and laying cement concrete 1:2:4(1 cement:2 sand :4 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads & lifts.
Providing and laying cement concrete 1 : 8 : 16 (1 cement : 8 sand : 16 graded stone aggregate 20 mm nominal size) and curing complete on slab and floor excluding cost of form work screed laid under flooring including carriage of material in all leads & lifts.
Brick work using 2nd class common burnt clay building bricks in superstructure above plinth level upto all floor level in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads & lifts.
Half brick masonry using 2nd class common burnt clay building bricks in super-structure above plinth level upto all floor level in cement mortar 1:4 (1 cement : 4 sand) including carriage of material in all leads & lifts.
2nd class common burnt clay building bricks 7.62 cm. thick in cement mortar 1:3 (1 cement:3 sand) including carriage of material in all leads & lifts.
Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6 (1 cement : 6 sand) including carriage of material in all leads & lifts.
Stone filling behind retaining walls including carriage of material in all leads & lifts.
Stone soling properly hand-packed filling interstices with spalls and consolidating with hand rammer including spreading watering etc.complete as per HP.PWD specification. 100 mm spread thickness (finished work including materials and labour) including carriage of material in all leads & lifts
Providing and fixing double rebate door frames fabricated from section roll formed out of 1.2mm thick galvanized steel (Base steel as per I:S 513) with zink of 120 gms /-Per Sqm .The over all size of section should be 125 x 60mm. The frame section should be cut to length and metre joined with corner brackets made of CRCA electroplated. The frame should be provided with:-(a) 3Nos. of M.S. powder coated 4" Butt hinges of 2mm thickness welded to the main frame.(b) 6Nos. of 1.2mm thick CRCA electroplated stiffeners should be welded to the main frame.(c) 6Nos. of 8" MS hold fast with split end tail welded to stiffeners plates (d) 1No. aldrop receiver. (e) Each frame should be provided with 25 x 50mm tie rod at bottom.All welded places should be treated with protective coat of zink rich primer.The entire frame should be provided with a coat of etch primer including carriage of material in all leads and lifts.
Providing and fixing single rebate door frames fabricated from section roll formed out of 1.2mm thick galvanized steel (Base steel as per I:S 513) with zink of 120 gms /-Per Sqm .The over all size of section should be 80 x 50mm and 105 x 60mm with rebate of 40mm for shutter. The frame section should be cut to length and metre joined with corner brackets made of CRCA electroplated.The frame should be provided with:-(a) 3Nos. of M.S. powder coated 4" Butt hinges of 2mm thickness welded to the main frame.(b) 6Nos. of 1.2mm thick CRCA electroplated stiffeners should be welded to the main frame.(c) 6Nos. of 8" MS hold fast with split end tail welded to stiffeners plates (d) 1No. aldrop receiver. (e) Each frame should be provided with 25 x 50mm tie rod at bottom.All welded places should be treated with protective coat of zink rich primer.The entire frame should be provided with a coat of etch primer including carriage of material in all leads and lifts.
Providing and fixing 40mm thick flush door shutters decorative type core of block board construction with frames of first class hard wood and well matched first class indian teak ply veneering with vertical grains or cross bends and face vencering on both faces of shutter factory made including carriage of material in all leads & lifts.
(a) Providing and fixing double rebate Windows Fabricated from roll formed sections made of Galvanized Steel Colour Coated /Powder Coated (Base steel as per IS 513"D" quantity, Galvanized as per IS 277 with Zinc of 120 grams/Sqm. ) with total coated thicknrss of o.60 mm.(i) Paint Specifications:-Coated Sections should be with primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or powder coated with pure polyester powder up to 60-60 microns thick.(ii) Dimensions of Sections:-Section for frame shouls be of 72mm X 55mm, section for Mullion should be of 72mm X 50mm, Section for shutter frame should be of 47mm x 20mm, Section for fixed Glass Bead should be of 12mm x 12mm and section for Fly mesh shutter frame should be of 40mm x 20mm.(iii) Fixing Details:-Frame and Mesh Shutter Sections should be cut to length and mitre jointed with corner Brackets made of polypropylene.Glass Shutter should be mitre joined with corner brackets made of CRCA electroplated.Mullion Section should be joined with frame / Mullion using Nylin mullion cap Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter between frame and Glazed shutter and bothsides of Fixed Glass. Spoon profile should be used around Fly mesh to fix Mesh in Mesh shutter.(iv)Accessories:-Each glazed shutter should be provided with MS Powder Coated friction Hinges-1set,High grade Aluminun powder coated Handle-1No. Each Mesh shutter should be provided with S.S.pivot Hinges-1set, Seccolor make handle shall be provided per shutter.Window Frame should be fixed to brick/concrete masonry by using nylon self expending caps and driving MS electroplated 80mm long screws into caps through frames.
(b) Glass:-Glass Shutter & fixed glass portion should be provided with a glass of 4mm plain Float Glass
(c) Mesh:-Mesh Shutter should be provided with a stainless steel 32 gauge Fly mesh of 304 grades with 144 holes per Square Inch.
(d) Grill:-Window should be provided with grill made of 10mm Sq. MS bars welded to at 150 mm centre to centre , 6mm x 12mm MS flat total grill unit should be powder coated and fixed to widow frame with screws.
Providing and fixing wire gauge shutters using galvanised MS wire gauge of IS gauge designation 85G. with wire of dia 0.56 mm for doors windows and clerestory windows including bright finished black enemelled iron hinges with necessary screwsincluding carriage of material in all leads & lifts. 40mm thick 2nd class deodar wood.
Providing and fixing anodized aluminium sliding door bolt annodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete including carriage of material in all leads & lifts.(a)250x16mm
Providing and fixing aluminium tower bolt (barrel type) annodized to transparent or dyed to required shade and colour with screws etc. complete including carriage of material in all leads & lifts.(a)250x 10 mm
Providing and fixing aluminium handles annodized transparent or dyed to required colour or shade with necessary screws including carriage of material in all leads & lifts. (a)125 mm
Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material in all leads & lifts.
Providing and fixing double action hydraulic floor spring of approved brand and manufacture (conforming to IS 6315) for aluminium / wooden doors including cost of cutting floor as required embedding in floors and cover plates etc. complete as per the direction of Engineer-In-Charge including making good the floor including carriage of material in all leads & lifts.
Providing and fixing bright finished brass hasps and stapples (safety type) with necessary screws etc complete including making good the floor including carriage of material in all leads & lifts. (a) 115 mm.
Providing and fixing 100mm bright finished brass rim latch with a dead bolt and pair of knobs with necessary screws etc. complete including carriage of material in all leads & lifts. (Indian make of approved quality)
Providing and fixing plain square edged cover fillets (beading) 40mmx12mm section with wood screws in ceiling and lining including mitring at junctions including carriage of material in all leads & lifts.(a) 1st class deodar wood.
Providing and fixing 19mm thick commercial board water proof shutters for up boards including fixing with nickel plated piano hinges with screws etc complete) including mitring at junctions including carriage of material in all leads & lifts.
Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc.complete) including carriage of material in all leads & lifts.
Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards /ply wood sheets with approved adhesive and nails etc complete including carriage of material in all leads & lifts.
Providing and fixing 25mm diameter curtain / cup board rods with brackets, plugs etc. where ever required including carriage of material in all leads & lifts.(a) First class indian teak wood.
Providing and laying granite stone in flooring 20mm (average thickness base of cement mortar 1:3 (1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete including carriage of material in all leads & lifts.
Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalent (any size and colour) 10mm thick manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1cement: 3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including cost of tiles where required to be cut including carriage of material in all leads & lifts.
Providing and laying Duro stone vetrified tiles (any size ) 10mm thick in grey /coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1cement:3sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including cost of tiles where required to be cut including carriage of material in all leads & lifts.
Providing and laying Duro stone vetrified tiles (any size ) 8mm thick in grey /coloured or of approved shade in skirting, riser of step and dado on a bed of 12mm thick cement mortar 1:3 (1cement:3sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including cost of tiles where required to be cut including carriage of material in all leads & lifts.
Providing and laying Digital tiles (any size ) 8mm thick in grey /coloured or of approved shade in skirting, riser of step and dado on a bed of 12mm thick cement mortar 1:3 (1cement:3sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including cost of tiles where required to be cut including carriage of material in all leads & lifts.
Kota stone slab 25 mm thick flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including carriage of material in all leads & lifts.
Kota stone slab 25 mm thick in risers of steps,skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete. including carriage of material in all leads & lifts.
Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of material in all leads & lifts.
Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including carriage of material in all leads & lifts.
Providing and fixing flushing 38cm overall with 0.60mm thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I.limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge including carriage of material in all leads & lifts.
Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board /facia /soffits /ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material in all leads & lifts.
Steel work welded in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material in all leads & lifts. (a) In beams joists channels ,angles , tee ,flats with onnecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like.
(b) In gratings framed guard bars,ladders,railling,brackets and similar works including carriage of material in all leads & lifts.
Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg / sqm including filling the joints with approved adhesive complete including carriage of material in all leads & lifts.(i) 150mm dia pipes
Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of material in all leads & lifts.(i)PVC Plain bend 150mm dia
(ii)PVC concrete type bend 150mm dia
(iii)PVC shoe 150mm dia
Providing and fixing m.s. holder bat clamps of approved design to C.I. or S.C.I /PVC pipes embeded in and including cement concrete blocks 10x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall etc.including carriage of material in all leads & lifts.(i) 150 mm dianetre for C.I. or S.C.I /PVC pipe
Providing and fixing stainless steel railing mark-36 pipe sizetop-2' pipe, post pipe 1" and 3' hight in staircase including necessary fittings and positions complete as per design approved by the Engineer-In-Charge including carriage of materials in all leads and lifts
Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead, red oxide/ zinc oxide chrome including carriage of material in all leads & lifts.
Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of material in all leads & lifts. Enamel paint other than white
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering and knotting including carriage of material in all leads & lifts. Ready mixed paint brushing wood primer pink.
Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter sand papering and stopping including carriage of material in all leads & lifts. Enamel paint other than white.
6mm cement plaster to ceiling in cement mortar 1:3 (1cement :3sand) including carriage of material in all leads & lifts.
15 mm cement plaster in single coat on fair side of brick / concrete/ stone walls for interior/ exterior plastering upto all heights including arises, Internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm in girth & finished even & smooth in cement mortar 1:6 ( 1 cement : 6 sand) including carriage of material in all leads & lifts.
20 mm cement plaster in single coat on rough side of brick / stone masonry for interior/ exterior plastering upto all heights including arises, internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm in girth and finished even & smooth in cement mortar1:6 (1cement : 6 sand) including carriage of material in all leads & lifts.
Applying Birla white wall care putty two or more coats over plastered surface after thoroughly brushing the surfase free from mortar drops, dust, loose materials and other forign matter sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads & lifts.(i) In Wall surface
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated ceiling surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer including carriage of material in all leads & lifts.
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer including carriage of material in all leads & lifts.
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equalized on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters etc. including and paper smooth complete including carriage of material in all leads & lifts.
Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregated 20mm nominal size) including carriage of material in all leads & lifts.
Providing under layer for plinth protection of 75 mm thick (un consolidated) bed of dry bricks / stone aggregate 40 mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material in all leads & lifts.
Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads & lifts.
Providing weep holes in brick masonry /stone masonry/ plain reinforced concrete abutment , wing wall,return wall with 100 mm dia pvc pipe extending through the full with of the structure with slop of 1(V):20 (H) towards drawing face complete as per drawing and technical specifications clause 614,1204,3.7 including carriage of materials in all leads and lifts.
Providing and fixing to wall ceiling and floors galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall ceiling and floors including carriage of material in all leads and lifts.
(a) 15mm nominal bore.
(b)20mm nominal bore
Making connection of galvanised steel distribution branch with galvanised mild steel main 20 mm to 40 mm nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material in all leads and lifts.
Providing and fixing to wall ceilingand floor Plytheline – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe confirming to IS 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capble to withstand temperature up to 80 degree C, including all special fittings composite materials (Engineering plastic blend brass insertes where ever required) e.g. elbows, tees, reducers, couplers and connectors etc. with clamp at one metre spacing.This includes testing of joints complete as per direction of Engineer-In-Charge including carriage of material in all leads and lifts. (i) 1216 (16 mm O.D. pipe)
Providing and fixing polythene water storage tank for storage of water up to all heights keeping water hygenic and safe for drinking etc.moulded to seamless perfection from FDA approved grades of polythene (LDPE / HDDE / CIDPE) confirming to BIS-12701-1989 with 40 mm nominal bore galvanised steel scoure tube with fittings 25mm nominal bore galvanised mild steel over flow tube with fitting & mosquito proof coupling of approved municipal design 15mm nominal bore ball valve and as per direction of Engineer-in- charge.(i) 1000 liters capacity
Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc. comlete including carriage of material in all leads and lifts.
(a)90mm dia.
(b) 110mm dia.
Providing and fixing brass full way valve with wheel including carriage of material in all leads and lifts.
(a) 15mm nominal bore.
(b)20mm nominal bore.
Providing and fixing PVC door bend with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
(a)90mm dia.
(b)110mm dia.
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
(a)90mm dia.
(b) 110mm dia.
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts.
(a)90mm dia.
(b) 110mm dia.
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive,cost of cutting and making good the wall and floors etc, complete including carriage of material in all leads and lifts.(a) 110 x 90 mm
Providing and fixing water closet W.C. pan wall hanging with cistern and P.P soft closet seat cover and hinges complete including carriage of material in all leads and lifts.
Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. Or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of material in all leads and lifts.(a)Flat back:-i) 550 mm x 400mm
Providing and fixing 32 mm nominal bore PTMT waste coupling of approved quality and colour including carriage of material in all leads and lifts.
Providing and fixing 32 mm dia C.P. Brass waste for wash basin or sink including carriage of material in all leads and lifts.
Providing and fixing 600mmx450mm bevelled edge mirror of superrior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brassscrews and washers including carriage of material in all leads and lifts . (Atul, Modi Guard, Saint Gobains)
Providig and fixing C.P. brass towel rail complete C.P.brass brackets ( fixed to wooden plugswith C.P. brass screws 600mm x20mm, including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)
Providing and fixing 600 mm x120 mm glass shelf with C.P.Brass bracket and guard rail complete, fixed to wooden plugs with C.P.Brass screws including carriage of material in all leads and lifts.
Providing and fixing C.P. brass soap dish with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of material in all leads and lifts.(ESS-ESS/CZAR/NOVA)
Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S.Brackets painted white including cutting holes and making good the same but excluding fitting including carriage of material in all leads and lifts.(DIAMOND, NIRALI NEELKANTH make) (a) 610 x 510 mm with bowl depth 200 mm.
Providing and fixing brass bib tap (Superior or heavy type) :-15 mm dia long body including carriage of material in all leads and lifts.
Providing and fixing C.P. brass pillar tap wih capstan head :-15 mm dia with Aerator, and including carriage of material in all leads and lifts.
Providing and fixing PVC connection pipe with brass unions including carriage of material in all leads and lifts.(a) 300/450 mm length (i) 15mm nominal bore.
Providing and fixing C.P.brass angle valve 15 mm without nuts and pipe including carriage of material in all leads and lifts .
Providing and fixing G.I./ M.I. union of the following sizes (where not included in the item) including carriage of material in all leads and lifts.
(a) 15mm nominal bore.
(b) 20mm nominal bore.
Providing and fixing stoneware gully trap grade"A" complete with C.I. grating. Brick masonary chamber in cement mortar 1:5 and water tight C.I. cover with frame of 300mmx300mm size (in side) the weight of cover to be not less than 4.53 kg and frame to be not less than 2.72kg. including carriage of material in all leads and lifts. (a) Square Mouth Traps: i)100mmx100mm size P type.
Cutting holes through existing brick/stone work including making good the same in cement mortar 1:6 (1cement : 6 sand) per cms. Depth of cutting including carriage of material in all leads and lifts. (i) Holes up to and including 400 sqcm in area.
Constructing man hole with RCC top slab in 1:2:4 mix (1cement:2sand: 4graded stone aggregate 20mm nominal size ) Foundation concrete 1:4:8 (1cement : 4sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortor 1:3(1 cement:3 sand) finished with a floating coat of neat cement and including making channels in cement concrete 1:2:4 mix (1cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testng including carriage of materials in all leads and lifts.
(a) Inside size 800mm x 800mm and 500mm deep including S.F.R.C. frame and cover medium duty 500mm diametre internal size.With 200mm thick walls of brick masnoey using common burnt clay building bricks in cement mortor 1:3 (1 cement :3sand) .
(b) Inside size 1200mm x 900mm x1000mm deep including S.F.R.C. frame and cover medium duty 1000mm diametre internal size.With 200mm thick walls of brick masnoey using common burnt clay building bricks in cement mortor 1:3 (1 cement :3sand) .
Providing and fixing C.P. Brass shower rose with 15mm or 20mm inlet, including carriage of material in all leads and lifts (a) 100mm dia.
Providing and fixing P.V.C. waste pipe flexible (coil type) length not less than 800 mm, including carriage of material in all leads and lifts.
Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap, including carriage of material in all leads and lifts.
VIJAY KUMAR BATRA GOVT CONTRACTOR
Vijay kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .