REPAIR REPLACEMENT TO CATTLE FENCING COMPOUND WALLS PATH AND CONNECTED WORKS IN MARRIED OFFRS ACCM UNDER AGE BR II AT GE WEST BAREILLY

Amount

Dismenteling posts or struts (wood or RCC ) any section ,including taking out embaded portion and making good disturbed portion posts embedded in natural ground.

Dismantling of Chain link /Barbad wire fencing of any dia.

Surface dressing n'exc 15 cm deep and getting out in any type of soil incl cleaning all grass, vegetation,samplings bushes etc.

Excavation in post holes (or similar holes) each n. exc. 0.5 cum getting out returning filling in and ramming earth or broken rubble around earth in layer not exceeding 25 cmwatering and removing surplus soil to a distance n.exc. 50 m and making good surface in soft /loose soil.

M & L PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete.

Supply only MS galvanised chainlink fencing 4.00mm dia 75 X 75 mm or 100 X 100 mm aprature weight not less than 3kg/Sqm.

Fixing only chainlink fencing line wires any mesh size and type to any type of standered talls, straining bolt etc including provision of binding wire.

M&L for applying two coats of synthetic enamel paint (1st quality) over a coat of red oxide primer on steel surface n exc 10 cm width or girth.

S&F in hand rails, half round or other stock section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165

All as per item above but with necessary welding / nut & bolt and febrication , erection fixing all as per reqmt (except materials)

S&F in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete

Demolition of brick or stone / boulder work built in cement mortar as in quoins, arches,pillars etc

M&L for Brickwork with fly ash brick in CM 1: 6 straight or curved on plan exc 6 m mean radius .

M&L 15mm thick rendering on walls brick or concrete surfaces in cement mortar 1:4 with water proofing compound, incl finish even and fair w/o using extra. Cement and then applying three coat white wash after preperation of newly plastered surface including aking down cement plaster on brick wall/stone wall, ceilings etc, racking out joints, hacking for key & scrubbing with water complete all as specified

Supply only integral waterproofing compound

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointing in any mortar

Demolition of PCC of any description n.exc. 15cm thickness (Un re-inforced).

M&L Machine pressed precast concrete interlocking paver block any colour, shape and size conforming to IS_15658-2006 of 60mm thick, M-35 Grade with grey cement and pigment over a layer 100 mm thick PCC 1:4:8, type D-2 with using 40mm graded stone aggregate as in sub base of floors is laid over and including 25 mm thick sand cushioning of existing PCC surface all as specified and as directed by Engr-in-charge

M&L for 40 mm thick cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) finishing sufaces even and smooth without using extra cement complete all as specified and directed

M&L for 25 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in floors, finished rough to receive floor tiles complete all as specified and directed

M& L for providing precast cement concrete rubber moulded chequered coloured tiles 20 to 25 mm thick even finished on top of approved design and pattern complete all as specified and directed

S & F of Precast cement concrete kerb stone (factory made) of cross section 350x100 mm and of length 150 mm of approved design/shape made out of cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:4 and two coat of cement base paint over a coat of primer etc.complete all as specified and directed.

M&L for painting on concrete/plastered blocks, kerb stone etc with sythentic enamel paint (any colour) Labels,etc nex 0.1 sqm each, inclunding cutting in edges complete.

M&L for udaipur green slab 15 to 18 mm thick in single steps riser of steps, skirting , dado and pillar laid over cement screed and jointed over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) over and including rendering 10 mm thick in cement mortar 1:3, as in backing layer

M&L for Two coats of white wash on old decorated surfaces of walls including cornices complete all as specified and directed.

Notes :

M/S Alam Construction Co

Builders Harpal

M/S Gupta and Company

Goel Enterprises

M/S VIRAT CONSTRUCTION

Shikhar ji Enterprises