Improvements to Sri Mittamalleswara Swamy Temple, Pulivendula(T&M), Kadapa District

Earth work excavation and depositing on banks with an initial lead of 10m and initial lift of 2m in soils like in rock like shales, ordinary gravel and rock like shales, ordinary gravel stoney earth and earth mixed with fair sized boulders etc completewhich do not require blasting etc., complete for foundations as per APSS No.308

Sand with filling sand from approved sources in layers not exeeding 15 cm thick, consolidating each deposited layer basement with Sand with watering and ramming with heavy rammers including all water leads, including charges for all operations, incidential, labour charge as per APSS-310

Plain Cement Concrete ( 1 :4 :8 ) proportion using 40mm size HBG metal from approved quarry including cost, seigniorage, conveyance of all material from approved source and all labour charges, curing, centering etc. complete for levelling Course Concrete. As per APSS 402

Flooring with vitrified tiles with matt finish of size 600x600 mm and thickness between 9-10 mm 1st quality confirming to IS:13711,IS:13712,IS:13630 (Parts 1to 15) of any colur and finish in all shades and designs. as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

V.R.C.C (1:11/2:3) using 20 MM size HBG graded chips with nominal mix SS-5 using necessary quantity and excluding cost and conveyance of steel per cum of concrete including cost and conveyance of all materials and all labour charges, seigniorage, curing, centering ( Using Steel) etc., complete as per APSS No.403 with BIS 456-2000 but excluding the cost of steel and its fabrication charges..a) plinth beam

b) columns base

Providing High Yield Strength Deformed Bars of Fe 415 Grade of different diametres including cost & conveyance of steel including cost of binding wire and labour charges for fabrication such as cutting, bending and cranking rods, tying grills with binding wire etc complete.

Providing laying testing and commissioning of classes of M.S pipe conforming to IS 3589&1239 including fittings and labour charges etc complete. (S.No. 1231 ELEC.9.5.19 Page No:244)

Supplying of Top Truss in Semi Circle including cost and coveyanc of all mateials and labour charges etc completea) Truss top and bottom pipes 50mm od MS pipe of 3.5mm thick

b) Truss internal cross supports 32mm od Ms Pipe 2.5 mm

c) Clits 6" x 2½x6mm M.S Plates

Supplying and fixing of Purlins 40x40mm rectangle MS pipe of 3mm thcik including cost and coveyanc of all mateials and labour charges etc complete

Supply and installation of Pre-painted Galvanized Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Zinc coating Z120 GSM.Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns,(Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours including cost and conveyance of all meterials and labour charges ctc; complete per finished item of work; as per drawing and as directed by Engineer In-charge.

Suppoying and fixing of boltsand plats including cost and coveyanc of all mateials and labour charges etc completea. Foundation bolts 3'-0" feet length 18mm thcik

b. Bolts with vouchers 3/8x 2"

c.Base and Top Plates

Providing Concealed wiring / in concealed wiring using 19MM dia PVC pipe using 1 /18 , 5/16 VIR copper wires for different points with necessary specials like bends , cupplings , celing roses , including the cost and conveyance of all materials and labour etc complete.

V.R.C.C (1:11/2:3) using 20 MM size HBG graded chips with nominal mix SS-5 using necessary quantity and excluding cost and conveyance of steel per cum of concrete including cost and conveyance of all materials and all labour charges, seigniorage, curing, centering ( Using Steel) etc., complete as per APSS No.403 with BIS 456-2000 but excluding the cost of steel and its fabrication charges.a) For Roof slab75mm thick

Providing High Yield Strength Deformed Bars of Fe 415 Grade of different diametres including cost & conveyance of steel including cost of binding wire and labour charges for fabrication such as cutting, bending and cranking rods, tying grills with binding wire etc complete.

Whether proof couse with CM( 1:3) mix using 20mm thick including cost and conveyance of all materials like cement, sand and water and labour, curing, scaffolding, seigniorage charges etc., complete. As per APSS No.904