Loading
Loading…
Loading…
Tender Value
₹25.4 L
EMD Value
₹50,800
Closing Date
5 Jun 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SRDEEGTVC
12 conditions · 1 needing a document upload
For electrical works, the contractor should have a valid electrical contractor license from the concerned statutory authority of any state of India. The electrical license should be in the name of the firm's or in the name of any authorized person of the tenderers firm. It must be ensured that the validity of electrical license should be valid during the entire contract period duly renewing at appropriate time for extending validity. If the tenderer hired the electrical license, authorization of the same should be submitted. 1)In case of other than Company/ Proprietary firm, Annexure - V(A) shall also be submitted by each member of a Partnership Firm/ Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. as the case may be. Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested /digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
13 conditions · 1 needing a document upload
All the tenderers/Contractors have to deposit full earnest money and tender document cost as stipulated for the tender, through online modes as permitted in IREPS application through multiple banks net banking, debit and credit cards . All documents related to Partnership deed/Joint venture/ Consortium/ MOU, duly signed by the notary public, should be uploaded failing which offer will be summarily rejected.
I/We also hereby agree to abide by the Indian Railways Standard General Conditions Of Contract, with all correction slips up-to- date and to carry out the work according to the Special Conditions of Contract and Specifications of materials and works as laid down by Railway in the annexed Special Conditions of contract , General Instructions and conditions , explanatory notes of schedule of work and Annexures.
I/We hereby Confirm that the rates, rebates and/or other financial terms, if any, quoted by us in the relevant fields of the Financial Bid page will only be the ruling terms for deciding the inter-se ranking, and any such condition having financial repercussions, if quoted by us anywhere else including attached documents shall not be considered for deciding inter-se ranking
However, Railways shall have the right to incorporate any such condition quoted by us, in the contract, at their discretion, if contract is placed on us.
Manual submission of EMD and cost of tender form cannot be entertained/Considered and hence no need of uploading the scanned copy of financial instruments
Whether GST registration available or not?
The contractor has to submit the EPF Code as per the EPFO Act and also has to submit a statement in this regard before signing the contract agreement.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The bidder has to fill in his quoted rate against each item in the Bid rate / Unit rate column. The bidding rate is Rs./ unit, the bidder has to quote his rate for the individual item only
Subsequent to the enforcement of GST Act, the modifications to Para-(a),clause 6, part I of Indian Railways Standard General condition of contract, July 2014 vide Railway Board letter No: 2017/CE/CT/4/GST(a) of 23/6/2017 is as detailed below: Clause No.6 - Care in submission of Tenders: (a)(i) Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer. (ii) Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017 (CGST)/ Integrated Goods and Services Tax Act, 2017 (IGST)/Union Territory Goods and Services Tax Act, 2017 (UTGST)/respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt & as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates. iii) The successful tenderer who is liable to be registered under CGST/IGST/UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to Railway immediately after the award of contract, without which no payment shall be release to the contractor. The contractor shall be responsible for deposition of applicable to the concerned authority. iv) In case the successful tenderer not able to be registered under CGST/IGST/UTGST/SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority. The contractor is liable to pay the taxes as stipulated in the GST Act and Rules and also should furnish the details of GST to deduct from the contractor's bill.
Ernakulam Marshalling Yard - Augmentation of water supply scheme by provision of OHT of capacity 200 Kilo Litres and 100 Kilo Litres GLR - Electrical arrangements
V-EG-OT-07-2026-2027
V-EG-OT-07-2026-2027
Open
Works - General
270 Days
Thiruvananthapuram, Kerala
₹0
₹50,800
5 Jun 2026
12 May 2026
22 May 2026
102 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 10,99,612.8 | ||
| — | 2.00 | — | — | ||
| Supply, erection, testing and commissioning of 10 HP vertical open well submersible pump set: ISI marked, star rated, water cooled and water lubricated capable of discharging water up to a head 40m delivery size: 65mm with cast iron impellers and stainless steel shaft suitable for operation in 3 phase 415V. | — | — | — | 1,92,034 | |
| — | 2.00 | — | — | ||
| Supply, erection, testing and commissioning of 7.5 HP bore well submersible pump set: ISI marked, star rated, water cooled and water lubricated capable of discharging water up to a head 140m and delivery size: 50mm with noryl impellers and stainless steel shaft suitable for operation in 3 phase 415V supply | — | — | — | 1,77,068 | |
| — | 1.00 | — | — | ||
| Fabrication, supply, erection, testing & commissioning of wall mounting type indoor cubicle panel fabricated out of powder coated 14 SWG CRCA sheet comprising of 1 No. 100A 4 Pole MCCB 25 kA as incomer, 4 Nos. 25x5 mm copper bus bars, 2 Nos. 40A TP MCBs (D Curve) as outgoing, 2 Nos. star delta starter (7.5 HP), 2 Nos. of timer, 2 Nos. 40A contactors, 2 Nos. single phasing cum dry run preventor, 2 Nos. of 5 KVAR PF correction capacitors, LED indicator lamps with fuse unit, selector switches, single phase analog ammeter-3 Nos., 1 No. multifunction meter etc. completely pre-wired including connection of cables | — | — | — | 92,479 | |
| — | 2.00 | — | — | ||
| Fabrication, supply, erection, testing & commissioning of wall mounting type cubicle panel fabricated out of powder coated 14 SWG CRCA sheet comprising of 1 No. 100A 4 Pole MCCB 25 kA as incomer, 4 Nos. 25x5 mm copper bus bars, 2 Nos. 63A TP MCBs (D Curve) as outgoing, 2 Nos. star delta starter (10 HP), 2 Nos. of timer, 2 Nos. 63A contactors, 2 Nos. single phasing cum dry run preventor, 2 Nos. of 7.5 KVAR PF correction capacitors, LED indicator lamps with fuse unit, selector switches, single phase analog ammeter-3 Nos., 1 No. multifunction meter etc. completely pre-wired including connection of cables | — | — | — | 1,96,296 | |
| — | 6.00 | — | — | ||
| Supply & fixing of double chambered float switch with 3 core cable for automatic operation of pump | — | — | — | 20,208 | |
| — | 2.00 | — | — | ||
| Supply and fixing of Cast iron, double flanged, ISI marked sluice valve 65 mm | — | — | — | 10,670 | |
| — | 2.00 | — | — | ||
| Supply and fixing of Cast iron, double flanged, ISI marked sluice valve 50 mm | — | — | — | 9,610 | |
| — | 2.00 | — | — | ||
| Supply and fixing of Cast iron, double flanged, ISI marked non-return valve 65 mm | — | — | — | 11,726 | |
| — | 2.00 | — | — | ||
| Supply and fixing of Cast iron, double flanged, ISI marked non-return valve 50 mm | — | — | — | 9,838 | |
| — | 80.00 | — | — | ||
| Supply and fixing of 65 mm dia Schedule 40 UPVC pipe using suitable fixing hardware | — | — | — | 34,640 | |
| — | 280.00 | — | — | ||
| Supply and fixing of 50 mm dia Schedule 40 UPVC pipe using suitable fixing hardware | — | — | — | 69,720 | |
| — | 2.00 | — | — | ||
| Supply & fixing of 90 degree heavy duty Schedule 80 UPVC bend suitable for 65 mm UPVC pipe | — | — | — | 1,244 | |
| — | 2.00 | — | — | ||
| Supply & fixing of 90 degree heavy duty Schedule 80 UPVC bend suitable for 50 mm UPVC pipe | — | — | — | 668 | |
| — | 16.00 | — | — | ||
| Supply & fixing of Schedule 80 UPVC flange 65mm | — | — | — | 8,752 | |
| — | 16.00 | — | — | ||
| Supply & fixing of Schedule 80 UPVC flange 50mm | — | — | — | 4,912 | |
| — | 1.00 | — | — | ||
| Supply & fixing of Schedule 80 UPVC 'T' 65mm | — | — | — | 547 | |
| — | 2.00 | — | — | ||
| Supply & fixing of Schedule 80 UPVC 'T' 50mm | — | — | — | 716 | |
| — | 350.00 | — | — | ||
| Supply of copper submersible cable of 3 core X 6.0 sqmm of reputed make | — | — | — | 93,800 | |
| — | 400.00 | — | — | ||
| Supply of copper submersible cable of 3 core X 2.5 sqmm of reputed make | — | — | — | 50,000 | |
| — | 300.00 | — | — | ||
| Supply of HDPE Pipe 32 mm dia, pressure rating up to 4 PN (Material gradePE 63) as per IS4984/1995 and laying in the excavated cable trench/fixing along building wall/fixing along UPVC pipe duly threading 6 sq.mm and 2.5 sq.mm flat submersible cables and termination at either ends as required at site | — | — | — | 28,500 | |
| — | 3.00 | — | — | ||
| Transportation & erection of rail arrangements over and across the open well/bore well/GLR for facilitating lifting/lowering of pump set (Rail will be supplied free departmentally) | — | — | — | 24,300 | |
| — | 300.00 | — | — | ||
| Supply & fixing/tying of ISI marked twisted chord poly propylene submersible marine rope 18mm | — | — | — | 33,600 | |
| — | 1.00 | — | — | ||
| Supply, erection, testing and commissioning of sinlge phase, 12 way, double door IP 43 protected, CRCA sheet manufactured, powder coated MCB distribution board complete with insulated phase bus bars/neutral bars with shrouds, earth bars, cement spill protector etc. fitted with 1 No. 40A,DP MCB and 1 No. 40A 30mA DP RCCB as incomer, 8 Nos. 6A SP MCBs as outgoing completely prewired. All cables should be properly terminated in tin coated copper lug | — | — | — | 9,090 | |
| — | 15.00 | — | — | ||
| Supply & drawing of PVC insulated copper cable of size 2.5 sq.mm three runs (1 run as earth wire) through PVC conduit including termination in a standard manner as required at site (supply & drawing of three runs of 2.5 sqmm is treated as 1 Metre) | — | — | — | 2,115 | |
| — | 8.00 | — | — | ||
| Supply & drawing of PVC insulated copper cable of size 6.0 sq.mm three runs (1 run as earth wire) through PVC conduit including termination in a standard manner as required at site (supply & drawing of three runs of 6.0 sqmm is treated as 1 Metre) | — | — | — | 1,848 | |
| — | 1.00 | — | — | ||
| Supply & fixing/concealing of 6 module metal box with front plate in a concealed manner | — | — | — | 469 | |
| — | 1.00 | — | — | ||
| — | — | — | 185 | ||
| — | 5.00 | — | — | ||
| — | — | — | 490 | ||
| — | 2.00 | — | — | ||
| — | — | — | 84 | ||
| — | 2.00 | — | — | ||
| — | — | — | 720 | ||
| — | 1.00 | — | — | ||
| — | — | — | 2,549 | ||
| — | 24.80 | — | — | ||
| Supply & single phase wiring to light/fan/LED board points by means of 2 Nos. of 1.5 Sq.mm (P&N) and 1 No. of 2.5 Sqmm (Earth) size Flame Retardant Low Smoke & Halogen (FR-LSH) PVC insulated single core multistranded flexible copper cable with ISI mark of approved make with coded color for Phase, Neutral and Earth through PVC pipe mentioned and termination on suitable junction box duly fitted with ceiling rose/tin coated copper lug as per site condition (supply and drawing of two runs of 1.5 sq.mm cable and one run of 2.5 sq.mm cable shall be treated as one metre) | — | — | — | 3,744.8 | |
| — | 50.00 | — | — | ||
| Supply & concealing/fixing of ivory colour ISI marked PVC pipe/PVC conduit 19/20mm dia, 1.4mm thick confirming to IS 9537 (Part 3) complete with bend, Ts, junction boxes etc. | — | — | — | 4,050 | |
| — | 1.00 | — | — | ||
| Supply & fixing of LED street light fitting 25 watts complete with driver assembly, pressure die cast aluminium housing, toughened glass cover conforming to IP 66 protection in the building wall including supply connection by PVC insulated copper cable with 5 years replaceable warranty for LED street light fittings | — | — | — | 2,361 | |
| — | 1.00 | — | — | ||
| Supply & clamping of 25 mm dia medium duty G.I pipe along building wall duly bending to position for fixing street light fitting, complete with 25x6 mm GI fixing hardware | — | — | — | 402 | |
| — | — | — | 14,40,973 | ||
| — | 605.00 | — | — | ||
| Excavation of cable trench 0.3 m wide x 1.0 m deep in ordinary soil, back filling of the excavated cable trench (after laying cable), ramming & consolidation properly | — | — | — | 2,92,215 | |
| — | 10.00 | — | — | ||
| Excavation of cable trench 0.3 m wide x 0.1 m deep in tarred/concreted surface, back filling of the excavated cable trench (after laying cable), ramming & consolidation properly | — | — | — | 19,720 | |
| — | 10.00 | — | — | ||
| Concreting the top portion of the cable trench excavated in tarred/concreted surface to a depth of 10.0 cm, using 1:3:6 mix with M sand | — | — | — | 26,740 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Earthing
ATTACHMENT
TenderDocument.pdf
ATTACHMENT
DrgV-E-29-25-26-LTEARTHING.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .