Electrical repair work at waste plastic plant and WPC lab.(Electrical works)

Amount

wiring for light point/ fan point/ exhaust fan point/ call bell point/ with 1.5sqmm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc as required.

Group-C

Wiring for circuit/submain wiring along with earth wire the following sizes of FR PVC insulated copper conductor single/ multi core cable in surface/ recessed steel conduit as required

2x2.5 sq mm + 1x2.5 sq mm earth wire

2x4 sq mm +1x4 sq mm earth wire

4 X 6 sq mm + 2 x 6 sq mm

supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recessed including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.

15/ 16 amps switch

3 pin 5/6 amps socket oulet

6 pin 15/ 16 amps socket oulet

Telephone socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switch in recess etc as required

1 or 2 module (75 mm x 75 mm)

8 module (125 mm x 125 mm)

12 module (200 mm x 150 mm)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 and 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. As required

Supplying and fixing 3 pin, 5A ceiling rose on the existing junction box/ wooden block including connection etc as required

Providing and fixing plain 16/0.20mm (0.50sqmm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.

Installation,testing and commissioning of pre-wired fluorescent fitting/compact fluorescent fitting of all types,compelete with all accessories and tube etc.directly on ceiling/wall,including connection with 1.5 sq mm FR PVC insulated copper conductor,single core cable and earthing etc. as required.

installation, testing and commissioning of ceiling fan, including wiring the down rod of standrand lenght ( up to 30cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable etc. As required

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc as requied upto 450 mm .

Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed steel/ PVC conduit as required.

1 run of cable

Providing and fixing following rating and breaking capacity MCCB in existing cubical panel board including drilling holes in cubical panel, making connections etc as required

200 Amp, 25 KA, TP MCCB

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415V TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required

12 way, (4 + 36) double door

Supplying and fixing 5 amps to 32 amps rating, 240v/ 415v, "C" curve, miniture circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing and commissioning etc. As required

single pole (Modular Type)

Double pole

Tripple pole

Tripple pole and neutral

Laying and fixing of one number PVC inslulated and PVC sheated/ XLPE power cable of 1.1KV grade of following size on wall surface as required.

Above 35 sq mm and upto 95 sq mm(clamped with 25x3mm MS flat clamp)

Excavation for cable trenches in soft soil depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soi, refilling with sand or good soil after laying of cable/pipe etc. in layers of 20 cm, ramming watreing and disposal of surplus excavated soil as directed, witinh a lead of 50 meters.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, earthing et. complete s required.

Supplying and fixing RJ45 outlet information module in exsiting modular box etc as required.

Supplying, fixing and commissioning of Industrial Heavy duty exhaust fan of 380 mm sweep 1400 rpm/Turboforce neo SP, HD suitable for 230v 50hz ac supply complete with blade, regular, frame and moving system etc as required .The same will be inspected and aproved by Engineer-in-charge before its dispatch from factory to site.

Supplying and laying of following size ISI marked PVC insulated and PVC sheathed/XLPE /FRLS aluminium conductor steel armoured alumimium cable of 1.1KV grade as required.

3.5 x 70 sq mm

Supplying and fixing following rating 415/230v C series, miniture circuit breaker suitable for lighting and other load of following poles in the existing MCB DB complete with connection, testing and commissioning etc as required

Tripple pole and neural, 63 amps

Supply and fabrication of sheet steel MCB enclosure fitted with din rail for MCB of following rating complete with connections including drilling holes etc as required.

Four pole enclosure

supply and fixing of following LED energy saving surface/ pendent mounting LED lamp fitting with powder coated /batten with in bulit electronic ballast with decortive end caps etc. as required.

2 X 4' X 20W LED luminaries with tube rod.

supply and commissioning of indoor recess/ surface 600X600mm (2'X2') LED luminaire 42w with high luman package etc as required.The product features special glare cut optics to ensure low luminaire luminance and is perfect for general and office lighting applications such as workstations, meeting rooms and cabins,corridors and break areas.(Havells/ Wipro/ Philiphs/ c&s) The same will be inspected and aproved by Engineer-in-charge before its dispatch from factory to site.

Supplying of Wall fan of 400 mm sweep, 5 STAR ,energy saving, decorative pacer model(white/brown/lovery) suitable for 230 V, single phase, 50 Hz supply including all etc…as required. (Havells/Bajaj/Usha).The same will be inspected and aproved by Engineer-in-charge before its dispatch from factory to site.

Total Power Control System (BID ID -769040)

DOON LIGHT ASSOCIATES (BID ID -769710)