C/o Gang Hut at Kallar in beat Jassai Block Ranital Kangra Range

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering. shuttering:- All work up to plinth level 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size)

Filling available excavated earth in trenches, plinth, sides of foundations etc. In layers 3 not exceeding 20 cm in depth consolidating each deposited layer by watering, ramming, lead up to 50m and lift upto 1.5m complete.

Stone soling under floor property hand packed and consolidation by hand ramming complete

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto plinth level with: in cement mortar 1:6 (1:cement: 6 sand)

Squared rubble masonary with hard stone of approved quality in cement mortar 1:6 (1 cement: 6 sand).

Centering and shuttering including strutting, propping etc. and removal of form for: a) Lintels, beams, plinth beams, girders, bressumers and cantilevers Suspended floors, roofs, landings, balconies and access platform

c) Edges of slab:- under 20cm wide

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15" landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Brick work with common bumt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:

Half brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).2nd class Sal wood

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws

Providing and fixing M.S. BP sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately) Eave

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick: Second class Teak Wood

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick Second class Teak wood

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

15 mm thick Cement plaster 1:5 (cement sand in respective ratio in rough sides of brick stones\concrete walls for plastering upto floor two level finished even and smooth including scaffolding.

Providing and fixing flat pressed 3 layer medium density partical board or graded particle board (Grade 1) IS: 3087 marked in ceiling with necessary nails etc. complete (Frame work to be paid separetly) 12mm thick

Providing and laying vitrified floor tiles with different sizes (thickness to be specified by the manufacturer). with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade over 20mm thick bed of cement mortar 1:4 (1 cement 4 sand) jointing with grey cement slurry @3.3 kg/sqm including grouting of joints with white cement & matching pigments etc complete. 800x1600x10mm

Providing and laying vitrified tiles with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps over 12mm thick bed of cement mortar 1:3 (1 cement 3 sand) jointing with grey cement slurry @3.3 kg/sqm including grouting of joints with white cement & matching pigments etc complete. Size of Tile 300x600 mm

Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc complete 300x16mm

Providing and fixing aluminium tower bolts (Berrel type) anodized transparent or dyed to required shade and colour with screws etc complete 300x16mm

Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etcetera complete. 125mm

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete.

Providing and fixing 100mm bright finished hard drawn hooks and eyes 100mm

Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work(hard & Soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new wood

Applying primary coat over new steel and other metal surfaces to give an even shade with ready mixed priming paint brushing red lead, Red oxide.

Painting two coats (excluding primary coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade i/c cleaning of all dirt dust and other foreign matter and sand papering and stopping

Providing 40x3mm flat iron hold fast 40 cm long i/c fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm 1:3:6.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture on wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matters and also including preparing the surface even and sand papered smooth including applying of putty as required for making the surface.

Finishing wall with premium acrylic smooth exterior grade emulsion of approved qualilty or its equivalent on wall surface (two coats) to give an even shade and final finish after throghly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete New work (Two or more coats applied @ 3.84Kg/10 sqm)

Provding under layer for plinth protection of 75mm thick (unconsolidated) bed of dry brick/stone aggregate 40mm nominal size) wall rammed and consolidated and grouted with fine sand including preparetion of ground.

Making plinth protection 50mm thick with cement concrete 1:3:6 (1Cement: 3Sand: 6 graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand including necessary excavation levelling & dressing including finishing the top smooth.

Constructing Coursed rubble hammer dressed "U" Shape open surface drain with side wall 15x22 cm in cement mortar 1:6 (1 cement: 6 sand) and inside plastering with cement mortar 1:3 (1 cement: 3 sand) including earth work and laying 10cm cement concrete 1:5:10 (1 cement: 5 sand: 10 graded stone aggregate 40mm nominal size) and 7.5 cm. cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and finished with a floating coat of neat cement complete as per standard design.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering, shuttering: - All work up to plinth level :1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size)

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 20 mm nominal size) upto plinth level with: in cement mortar 1:6 (1:cement:6 sand)

Coursed rubble masonry (first sort) with hard stone of approved quality in founadtion and plinth i/c raking out joints in cement Mortar 1:6 (1Cement: 6 Sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:

Half brick masonry work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:

15 mm cement plaster on the rough side of single or half brick wall of mix in ratio 1:6 (1 Cement:6 Coarse sand)

Providing and fixing MS grill of requird pattern in wooden frames of windows etc. plain grill

Finishing wall with water proofing cement paint of required shade new work (Two or more coats applied @ 3.84 Kg/10 Sqm)

Applying priming coat with ready mixed red oxide chromate primer of approved brand and manufacture of steel works

Painting with synthetic enamel paint of approved brand & manufacture to give an even shade with two or more coats on new work

Providing under laying damp proof course to horizontal surface with cementconcrete 1:2:4 for coping and curing complete.20mm thick

Construction of septic tank

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.

Providing and laying in position cement concrete of specified grade excluding the cost of centering, shuttering: - All work up to plinth level: 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure upto plinth level in all shapes and sizes in:

15 mm cement plaster on the rough side of single or half brick wall of mixin ratio 1:6 (1 Cement:6 Coarse sand)

Cement concrete flooring 1:2:4 (1 Cement: 2 Sand:4 graded stone aggregate) with 40mm thick with 20 mm nominal size stone aggregate

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size).

Boulder/brick pieces, gravel filling in soak pit.

Installation of electricity fitting.

deepanshu (BID ID -450868)

SHER KHAN GOVT. CONTRACTOR (BID ID -450682)

KANTA DEVI GOVERNMENT CONTRACTOR (BID ID -450191)

ANIL KUMAR (BID ID -449925)

AJIT SINGH GOVT CONTRACTOR (BID ID -450984)

ASHISH SHARMA (BID ID -450929)