UPGRADATION OF LOGISTICS SECTION AT HQ SWAC VSN CHILODA

Amount

NOTE: Schedule ‘A’ Part I to XIII under Ser No. 1 to 12 here in after are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lump sum price worked out for BUILDING/ STRUCTURES as listed in Sch 'A’ Part I.

Lump sum price worked out for EXCAVATION & EARTH WORK as listed in Sch 'A’ Part II.

Lump sum price worked out for INTERNAL WATER SUPPLY as listed in Sch 'A’ Part III.

Lump sum price worked out for INTERNAL ELECTRIFICATION as listed in Sch 'A’ Part IV.

Lump sum price worked out for SEWAGE DISPOSAL as listed in Sch 'A’ Part V.

Lump sum price worked out for AREA DRAINAGE as listed in Sch 'A’ Part VI.

Lump sum price worked out for PATH / HARDSTANDING as listed in Sch 'A’ Part VII.

Lump sum price worked out for EXTERNAL WATER SUPPLY as listed in Sch 'A’ Part VIII.

Lump sum price worked out for EXTERNAL ELECTRIC SUPPLY as listed in Sch 'A’ Part IX

Lump sum price worked out for AC& REFRIGERATION as listed in Sch 'A’ Part X

Lump sum price worked out for OPEN SHED as listed in Sch 'A’ Part XI

Lump sum price worked out for WALL CABINET as listed in Sch 'A’ Part XII

SCHEDULE `A' PART-XIII (MISCELLANEOUS ITEMS) (Note for following items- The contractor shall quote his rate for each of these items separately. The estimated rate is left blank since the same is not prepriced by MES)

INTERNAL ELECTRIFICATION

S & F LED tube light fittings 1x20 Watts, single side connection 230 volts surface and wall mounted LED type, extruded thermoplastic provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductor cable of size 1.5 sqmm all as specified

S & F LED light fittings 1x10Watts, single side connection 230 volts surface and wall mounted LED type complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductor cable of size 1.5 sqmm all as specified.

S&F Exhaust fan made of sturdy engineering plastic, AC single phase 230/ 240 V of size 300 mm sweep, 1400 RPM with louver shutter complete all as specified

S&F Ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and as directed.

S & F 25 W LED building Security light pressure die cast aluminium IP-66 protection road way luminaire with fixing and fitting lamp bracket with impact and corrosion resistant

EXTERNAL ELECTRIC SUPPLY

COOLING APPLIANCES

S&F Desert cooler electric driven (single phase), having normal air flow capacity of 4000 CuM per hours (or nearest size). Steel body of make Bajaj/Khaitan/symphony/Ram.

S &F Desert cooler trolley mounted stand complete all as specified

S&F Package reverse osmosis system water purifier of capacity 25 ltr per hour, fully automatic with auto cut off R0+UV+Alkaline Potable Water Purification System wall mounted with softener, with complete fitting single phase with sensor complete all as directed

Supply , install high wall split type air conditioner unit indoor/out door complete with cordless remote control unit and with in built air ioniser and plasma filter for batter indoor air quality and EER 3.2 of cap 2.0 ton inverter type 5 star of make Daikin or eqivalent of Voltas/bluestar (Note: Contractor shall be resposible to provide extra copper pipe and drain pipe as per site requirement .No extra payment shall be made to the contractor on this account.The quoted rate shall be deemed to inclusive for the same )

WALL CABINET

M&L Cabinet/Cupboard in required size at site made out 18/19 mm thick one side decorative lamination sheet consisting of carcass 18 mm thick PVC sheet & provn of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets 5.5cm screws etc. the panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish, shelves with frame work. locking arrangements complete as per manufacturer’s instructions. Colour of PVC sheet shall be approved by GE .

ALBA AC AND REF SERVICES

divyarsh entrprise