PROVISION OF HARD STANDING COVERED SHED FOR FOUR LIGHT VEHICLES 150M LONG 1.4M HIGH CHAIN LINK FENCE AND 3X350LITRE FROST FREE REFRIGERATORS AND 2XSPLIT AC UNITS 1.5T AT NCC COMPLEX SILCHAR UNDER GE SILCHAR

Amount

Excavating in post holes (or similar holes) each not exceeding 0.5cum, returning, filling in, getting out in soft / loose soil and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance not exceeding 50m complete all as specified and as directed

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out complete all as specified and as directed

M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in supports to chain link fencing complete all as specified and as directed

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm in length, dia of neck & shank 10 to 15mm complete all as specified and as directed

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed at both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 22.5cm and not exceeding 30cm in length, dia of neck & shank 16mm including 'L'/'J' hook as required at site complete all as specified and as directed

S&F steel work in tubular trusses including special shaped washer etc. using ERW or induction butt welded tubes conforming to IS: 1161-1979 grade St-240 complete all as specified and as directed

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe-410W grade E-250 quality 'B' complete all as specified and as directed

S&F MS angle iron, flats as in posts, strurts and similar works conforming to Fe-290 grade E-165 including cutting, bending as required drilling holes, notching for wires, etc. flat iron fillets, square bars etc. (for securing wire mesh), bolting, rivetting, etc. as required complete all as specified and as directed

Supply only chain link MS galvanised fencing, any size or type complete all as specified and as directed Note: Weight of chain link shall be ascertained by a BOO ordered by the GE

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provisioning of binding wire complete all as specified and as directed

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius as in half brick thick walls built in CM (1:4) complete all as specified and as directed

M&L for hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and as directed

M&L for 100mm thick plain cement concrete 1:4:8 (type D-2) using 40mm graded stone aggregate as sub-bases, floors, etc. surfaces finished fair and even complete all as specified and as directed

M&L for 100mm thick plain cement concrete 1:2:4 (type B-1) using 20mm graded stone aggregate as sub-bases, floors, etc. surfaces finished even and smooth complete all as specified and as directed

M&L for 75mm thick plain cement concrete 1:3:6 (type C-2) using 40mm graded stone aggregate as in floors, plinth protection, pavings, etc. surface finished even and smooth complete all as specified and as directed

M&L for plain cement concrete type C-2 1:3:6 using 40mm graded stone aggregates as in foundation filling and mass concrete complete all as specified and as directed

M&L rendering 15mm thick, in cement mortar (1:4) on walls / concrete surfaces, etc. in two layers (10+5mm) finishing layer mixed with integral water proofing compound @3% by weight of cement, finished even and fair without using extra cement complete all as specified and as directed Note: WPC will be measured and paid separately under respective item herein

Supply only integral water proofing compound all as specified

M&L rendering 10mm thick in cement mortar (1:6) on fair surfaces of PCC block / brick masonry wall / concrete surfaces, etc. finished even and fair without using extra cement complete all as specified and as directed

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour (s approved) having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour (as approved) having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistant, dirt resistant, exterior paint of approved shade (company depot tinted) with silicon additives @1.43litre/10sqm over and including a priming coat of exterior primer applied @0.90 litre/10sqm over new surfaces of brickwork,concrete, etc. including all necessary staging, scaffolding, etc.required complete all as specified as as directed

M&L for preparation of new masonry / concrete wall surfaces and applying two coats of white wash including all necessary staging, scaffolding, safety precautions, etc. as required to work at heights, etc. complete all as specified and as directed

M&L for preparing of new steel / metal surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed

M&L for preparing of new steel surfaces of any description viz. roof trusses, purlins, rafters, angle iron posts, etc. not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed

M&L for submain wring using proper colour coding with 4 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 4sqmm and 1 run of 4sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including non-metallinc rigid PVC casing capping 20mm wide, heavy duty, ISI marked surface on wall/ceiling/roof, etc. with all required accessories complete all as specified and as directed Notes: (i) 4 runs of 4sqmm main cable, 1 run of earth conductors and 1 run of PVC casing capping as per item shall be measured as one length (ii) Separate casing shall be used for each sub-main wiring circuit irrespective of numbers of wire (iii) The minimum size of conduit shall be as stipulated, however higher sizes shall be used as per number of cables passing through. The Engineer-in-charge shall ensure for proper size of conduit / casing as per requirement at site

M&L for point wiring with 4sqmm, single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade with multi-stranded copper conductor, drawn through and including non-metallic rigid PVC casing capping not less than 20mm wide and accessories surface on walls, ceiling etc. and including provision of 4sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly with and including PVC sunken box and all accessories for one switch socket power outlet 20A complete all as specified and as directed

S&F, connecting & testing single pole and neutral sheet metal enclosures, powder coated, with 2 pin earth plug & socket with and including 01No. MCB 20A, SP, 240V,10kA complete all as specified and as directed