REPAIR/MAINT OF INTERNAL WIRING, SWITCHES, SOCKETS INCL LED FITTINGS ETC IN OR ACCN, OTM ACCN/MH OFFICE AT PANGODE MIL STATION TRIVANDRUM

Amount

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials from site after accounting in credit schedule and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring complete for one light point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multistranded, copper conductor through PVC casing and capping 20/ 25 mm size with accessories with sunk iron pressed steel terminal box for fitting mounting switches, sockets, fan regulators etc, with laminated sheet 3mm thick cover including provision of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as specified and directed.

All as per SI item No. 2.00 here-in-before, but for one fan point controlled by one way switch complete all as specified and directed.

All as per SI item No. 2.00 here-in-before, but for one exhaust fan point controlled by one way switch complete all as specified and directed.

All as per SI item No. 2.00 here-in-before, but for one 5 Amp socket outlet on the same board with other switches and sockets complete all as specified and directed.

All as per SI item No. 2.00 here-in-before, but for one 5 Amp socket outlet on independent board all as specified and directed.

All as per SI item No. 2.00 here-in-before, but for one 3 pin switch socket outlet, 15 Amps, independent, with cables 4.00 sq. mm size sheathed stranded 1100 Volt grade complete with 4.00 Sqmm PVC insulated earth wire and connecting to earth dolly all as specified and directed.

All as per SI item No. 2.00 here-in-before, but for One bell/ buzzer point controlled by one push button complete all as specified and directed.

S&F switch piano, flush type single pole, one way 6 Amp complete all as specified and directed.

S&F switch socket combination multi purpose 5 pin 6 Amp flush type complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin 6 Amp and 3 pin 16 Amp flush type universal complete all as specified and directed.

S&F Bell push, flush type, 5 Amp, 240 Volt, one way complete all as specified and directed.

S&F in repairs switch piano, flush type single pole, one way 6 Amp, 240 Volt complete all as specified and directed.

S&F in repairs modular switch, one way 6 Amp, 1 module, 240 Volt complete all as specified and directed.

S&F in repairs modular switch, one way 16 Amp, 1 module, 240 Volt complete all as specified and directed.

S&F in repairs modular fan step regulator, 120 Watt, 240 Volts, 2 module, 50 Hz complete all as specified and directed.

S&F in repairs bell push, flush type, single pole, one way 5 Amp, 240 Volt complete all as specified and directed.

S&F in repairs bell push, modular type, single pole, one way 6 Amp, 1 module, 230 Volt complete all as specified and directed.

S&F in repairs socket outlet, 3 pin 6 Amp flush type complete all as specified and directed.

S&F in repairs socket outlet multipurpose 5 pin, 6 Amp, modular type, 2 module complete all as specified and directed.

S&F in repairs socket outlet multipurpose, 2 module, 2/3 pin combained, 6/16 Amp, modular type, 2 module complete all as specified and directed.

S&F stepped type electronic fan regulator, flush type, 240 Volts, 50 Hz complete all as specified and directed.

S&F socket outlet 5 pin, 6 Amps 240 Volt complete all as specified and directed.

S&F switch socket combination 2 in 1, 3 pin 6 Amp flush type universal complete all as specified and directed.

S&F Switch socket combination 5 in 1, 6/16 Amp, 240Volt flush type universal complete all as specified and directed.

S&F in repairs modular white cover plate with frame 1 Module complete all as specified and directed.

S&F in repairs modular white cover plate with frame 2 Module complete all as specified and directed.

S&F in repairs modular white cover plate with frame 3 Module complete all as specified and directed.

S&F in repairs modular white cover plate with frame 4 Module complete all as specified and directed.

S&F in repairs modular white cover plate with frame 6 Module complete all as specified and directed.

S&F in repairs Modular metal flush box 1/2 Module complete all as specified and directed. Note : The contractor will ensure to remove old metal box and fix new, after fixing clear the surface of wall/ceiling with putty and paint to match the existing.

S&F in repairs Modular metal flush box 3 Module complete all as specified and directed. Note : The contractor will ensure to remove old metal box and fix new, after fixing clear the surface of wall/ceiling with putty and paint to match the existing.

S&F in repairs Modular metal flush box 4/5 Module complete all as specified and directed. Note : The contractor will ensure to remove old metal box and fix new, after fixing clear the surface of wall/ceiling with putty and paint to match the existing.

S&F in repairs Modular metal flush box 6 Module complete all as specified and directed. Note : The contractor will ensure to remove old metal box and fix new, after fixing clear the surface of wall/ceiling with putty and paint to match the existing.

S&F in repairs Switch socket combination 2 in 1, 3 pin 6 Amp and 16 Amp flush type universal complete all as specified and directed.

S&F in repairs ceiling fan regulator rotary type 120 Watts complete all as specified and directed.

S&F in repairs ceiling fan regulator modular type 120 Watts complete all as specified and directed.

S&F ceiling rose, 3 terminal bakalite surface complete all as specified and directed.

S&F ceiling rose surface PVC/ Polycarbonate, isolated body with face Bakelite 65x50 mm three terminals complete all as specified and directed.

S&F lamp holder, angular type, PVC/ Polycarbonate type with back plate suitable for batten fittings ccomplete all as specified and directed.

S&F calling bell, AC, 230 volts, single pole complete all as specified and directed.

S&F distribution board made out of sheet metal enclosure (CRCA sheet powder coated), dust and vermin proof, double door, for enclosing/ fixing MCCB, TPN 4 way, 415 volts grade with 125 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urethane (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing complete all as specified and directed.

S&F in repairs MCCB, four pole, 100 Amp, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 16 KA including making incoming and outgoing connections complete all as specified and directed.

S&F in repairs MCCB, four pole, 63 Amp, 415 volts, 50 Hz, having thermal setting range 70% to 100% and adjustable magnetic setting and breaking capacity 16 KA including making incoming and outgoing connections complete all as specified and directed.

S&F distribution board made out of sheet metal enclosure (CRCA sheet powder coated) dust and vermin proof, double door, for fixing enclosing/ fixing MCB, SPN 8 way, 415 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urethane (PU) gasketing, IK-08 Mechanical impact resistance, door earthing flush to wall, including testing complete all as specified and directed.

S&F MCB single pole 5 to 32 Amps current carrying capacity, 240 volt rating, 10 KA, C curve with IP-20 protected terminals including contact indication window, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., complete with connection, testing and commissioning complete all as specified and directed.

S&F MCB single pole and neutral 32 Amps current carrying capacity, 240 volt rating, 10 KA, C curve with IP-20 protected terminals including contact indication window, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., complete with connection, testing and commissioning complete all as specified and directed.

S&F MCB single pole and neutral 40 to 63 Amps current carrying capacity, 240 volt rating, 10 KA, C curve with IP-20 protected terminals including contact indication window, IP-20 protection, energy limitation Class-3, airflow channels on both sides, bi-connect terminals etc., complete with connection, testing and commissioning complete all as specified and directed.

S&F sub-main wiring with 2 runs of 6 sqmm single core PVC insulated, FRLS, unsheathed cable with stranded copper conductor, 1100 Volts grade drawn through and including PVC conduit with all fitting such as Tees, Bends, Elbows, etc., fixed surface on wall/ceiling including 6 Sqmm multistranded PVC insulated, FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. NOTE: Two runs of 6.0 sqmm copper cables and one run of 6.0 sq mm copper cable along with white colour PVC conduit/ conduit accessories will be measured as one unit length.

S&F sub-main wiring with 4 runs of 6 sqmm single core PVC insulated, FRLS, unsheathed cable with stranded copper conductor, 1100 Volts grade drawn through and including PVC conduit 20/25mm bore with all fitting such as Tees, Bends, Elbows, etc., fixed surface on wall/ceiling including 1 run of 6 Sqmm multistranded PVC insulated, FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. NOTE: 4 runs of 6.0 sqmm copper cables and one run of 6.0 sq mm copper cable along with white colour PVC conduit/ conduit accessories will be measured as one unit length.

S&F sub-main wiring with 4 runs of 10 sqmm single core PVC insulated, FRLS, unsheathed cable with stranded copper conductor, 1100 Volts grade drawn through and including PVC conduit 20/25mm bore with all fitting such as Tees, Bends, Elbows, etc., fixed surface on wall/ceiling including 1 run of 10 Sqmm multistranded PVC insulated, FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. NOTE: 4 runs of 10.0 sqmm copper cables and one run of 10.0 sq mm copper cable along with white colour PVC conduit/ conduit accessories will be measured as one unit length.

S&F sub-main wiring with 2 runs of 4 sqmm single core PVC insulated, FRLS, unsheathed cable with stranded copper conductor, 1100 Volts grade drawn through and including PVC conduit 20/25mm bore with all fitting such as Tees, Bends, Elbows, etc., fixed surface on wall/ceiling including 1 run of 4 Sqmm multistranded PVC insulated, FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed. NOTE: 2 runs of 4.0 sqmm copper cables and one run of 4.0 sq mm copper cable along with white colour PVC conduit/ conduit accessories will be measured as one unit length.

S&F in repair 10 watts metal bulk head light fitting, 220 volts, AC decorative type with driver including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Jaquar cat No. LBLK02X010XN or equivalent make in Philips / Bajaj / Wipro / Osram / GE / Havells / HPL.

Supply and fixing in repair ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

S&F in repairs exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.

S&F in repairs exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers complete all as pecified and directed.

S&F light frosted glass with chrome finish wall lamp 1 x 4 Watts, warm white, body dark grey colour, aluminium die-cast with IP-65 protection including LED bulb complete all as including taking down existing unserviceable one and removing from site complete all as specified and directed. Make: Jaquar cat No. JNL-CHR-MB160275211A (E27 LED 4W*1) or equivalent make of Philips/Bajaj/Wipro/Osram/GE/Havells

S&F smart extruded aluminium LED batten (4ft) with higher efficacy 1x 20W, 220V, AC decorative box type with driver, warm/cool white (as directed by Engr-in-Charge), double sided connection, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, including taking down existing unserviceable one and removing from site complete all as specified and directed. Make: Bajaj Cat No. BCLAB 20W LED P or equivalent make of Philips/Bajaj/Wipro

S&F in repairs LED light in fittings 1 x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watts, 220 V, AC decorative type with warm/cool white (as directed by Engr-in-Charge), driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below normal ground level, connected to galvanised earth lead wire of size 4mm dia by means of GI Bolts, Nuts, check nuts and washers of the earth and thimbles and other end of the earth GI wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade raised up to a level of 50cm above ground level with plug at top, earthing pit in PCC (1:3:6) type C-1 RCC pre-cast (1:2:4 type B-1) cover slab of 50 mm thick using 8.00mm dia CTD bars reinforcement both ways at 140 mm centre to centre with handle, 20 mm dia GI pipe medium grade for watering pipe, wire mesh, funnel and providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/ loose soil, returning, refilling and removing of surplus soil to a distance not exceeding 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed, including taking down existing unserviceable earthing complete all as specified and directed.

M&L for Earthing complete with copper earth plate electrode 60 cm x 60 cm x 3.15mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below normal ground level, connected to earth lead of copper strip of size 20x3mm by means of GI Bolts, Nuts, check nuts and washers of the earth and thimbles and other end of the earth strip connected to earthing test point and protected by galvanised iron pipe light grade 50mm bore from earth plate to Panel/DBs and water pipe 20mm bore GI medium grade raised up to a level of 50cm above ground level with plug at top, earthing pit in PCC (1:3:6) type C-1 RCC pre-cast (1:2:4 type B-1) cover slab of 50 mm thick using 8.00mm dia CTD bars reinforcement both ways at 140 mm centre to centre with handle, 20 mm bore GI pipe medium grade for watering pipe, wire mesh, funnel and providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/ loose soil, returning, refilling and removing of surplus soil to a distance not exceeding 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed, including taking down existing unserviceable earthing complete all as specified and directed.

M&L for 4mm dia galvanised iron or steel wire earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. complete all as specified and directed.

S&F in repairs sheet steel metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket complete including one single pole MCB SP 20 Amp, 240 volts complete all as specified and directed.

S&F in repairs LED tube rod (double side connection) ultra bright glass LED tube of capacity 18 Watt, 230 Volt with high efficiency for installation in existing fittings complete all as specified and directed

S&F in repairs electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. including taking down the existing complete all as specified and directed

SUJAN (BID ID -3115578)

ROTECH ENGINEERS AND BUILDERS (BID ID -3127130)

S L ELECTRICAL WORKS (BID ID -3115991)

SUPER COOL (BID ID -3127353)

PARAMBIL ENTERPRISES (BID ID -3126374)

M/s VJ ENTERPRISES (BID ID -3113942)

General Engineering and Constructions (BID ID -3115542)