Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.7 LAccepted-AOC | ₹5.7 L | L1 | Accepted-AOC Stood L1 |
| 2 | L2₹6.0 L+₹33,136 (5.83%)Rejected-Finance DHARMANAGAR NORTH TRIPURA | ₹6.0 L+₹33,136 (5.83%) | L2 | Rejected-Finance Higher than L1 |
| 3 | L3₹7.1 L+₹1.4 L (25.3%)Rejected-Finance VILL PANISAGAR P O PANISAGAR NORTH TRIPURA PIN 799260 | NORTH TRIPURA | TRIPURA | 799260 | ₹7.1 L+₹1.4 L (25.3%) | L3 | Rejected-Finance Higher than L1 |
| 4 | L4₹10.1 L+₹4.4 L (76.9%)Rejected-Finance | ₹10.1 L+₹4.4 L (76.9%) | L4 | Rejected-Finance Higher than L1 |
Tender Value
₹8.7 L
EMD Value
₹17,486
Closing Date
20 Jun 2026, 3:00 pmClosed
The Executive Engineer, DWS Division Dharmanagar
Office of the Executive Engineer, DWS Division Dharmanagar, North Tripura PIN _799250
Mtc. of RWS/PDF/15 FC/Other panchayat/ Deposit Fund Schemes in North Tripura District 2026-27/SH- Replacement and mtc of electrical accessories, pump motor etc in/c allied works of different SBDTW of Panisagar RD Block of DWS Sub-Division Panisagar
2026_CEDWS_73664_1
18/EE/DWS/DMN/2026-27
Open Tender
Civil Works - Water Works
Percentage
180 days
Panisagar
Please Refer Bid Document
6 documents required · 6 mandatory
₹1,000
₹17,486
27 Jul 2026
11 Jun 2026
20 Jun 2026
11 Jun 2026
20 Jun 2026
11 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T/Havells/BCH make etc. complete as per specification and direction of the Engineer-in-charge. i)32 amos | 25 | nos | 5,266 | ₹1,31,650 |
| 2 | Repair and maintenance of submessible Motor suitable for submerssible pumpset by complete dismantling in/c providing & fitting fixing of PVC (IS 8783-1978) insulated electro grade copper (IS: 613-1984) conductor winding in stator & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge.
2.0 HP Motor suitable for 2000 GPH capacity submerssible pumpset | 40 | nos | 6,794.9 | ₹2,71,796 |
| 3 | Providing and fixing of UPVC end cap / well cap suitable for UPVC 'CM casing or 'CS' casing or 'RS' pipes as per specification and direction of the Engineer -in-charge. i) 150 mm dia | 15 | nos | 589.1 | ₹8,836.5 |
| 4 | Providing and fitting fixing with PVC insulated single core multistrand Copper cable conforming to IS: 694 for inter connection with all electrical equipments of the pannel board as per specification and direction of the Engineer-in-charge.
i) 10 sqmm | 25 | mtr | 269.9 | ₹6,747.5 |
| 5 | Washing and development of the tube well by air compressor and testing of the tube well as per direction of the Engineer in charge.
i. 100 mm dia | 95 | nos | 47 | ₹4,465 |
| 6 | Supplying and fitting fixing of B13 (size width 450mmXlength 1200mmX height 850mm) fitted with 4 nos suportt of 75 mm X 75mm( 6mm thick) M.S. angle for embedding in 1:2:4 cement concrete base ( size 300 mm X 300 mm dia X600 mm) with proper locking arrangement and coated with anti corrosiv paint (both inside and outside) including necessary provision for fitting fixing of single phase motor starter unit main switch energy meter etc complete in all respect as per direction of the engineer in charge. | 10 | nos | 10,000 | ₹1,00,000 |
| 7 | Providing and fixing C.I. non-return valve of approved quality as per CPWD specification and direction of the Engineer - in charge.
i. 50 mm nominal bore | 12 | nos | 3,626.1 | ₹43,513.2 |
| 8 | Providing and fitting fixing G.I. pipe (medium class) conforming to IS: 1239 for OHP of approved quality as per specification and direction of the Engineer-in-charge. i)40mm dia | 24 | mtr | 753.2 | ₹18,076.8 |
| 9 | Lowering of submerssible pump of 45.0 Mtr. Head with suitable single phase submerssible motor including additional 32.00 Mtr submersible 3 core copper flat cabl e(2.5 mm2 size) complete all respect as per direction of the Engineer-in- Charge.
a) for 2000 GPH capacity submersible pump with 3HP submersible motor. | 40 | nos | 2,054 | ₹82,160 |
| 10 | Lifting of submerssible pump of 45.0 Mtr. Head with suitable single phase submerssible motor including additional 32.00 Mtr submersible 3 core copper flat cable(2.5 mm2 size) complete all respect as per direction of the Engineer-in Charge.
a) for 2000 GPH capacity submersible pump with 3HP submersible motor | 40 | nos | 2,054 | ₹82,160 |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_74971.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.00 MB
BOQ_74971.xls
BOQ • 0.39 MB
DNIeT18EE.pdf
Tender Documents • 1.99 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .