Construction of Toilet at Gandevi Lake forGandevi Nagar Palika.

Name Of Work : Construction of Toilet at Gandevi Lake for Gandevi Nagar Palika.

Qty. Item of work In Unit Total

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the excavated stuff with all lead and lift

Meter lead.(A) Loose or soft soil

Dismantling santtary fittings like wash basin . W.C.

2 4.00 pan Indian and European type, flushing tank etc. 415.79 Each

including stacking the materials with all lead and lift.

Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

lift.(ii) In Cement Mortar.

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken stone

5 2.10 aggregates 40 mmnominal size) and curing complete 3080.90 C.M.

excluding cost of formwork in (A) Foundation and

Providing and laying controlled cement concrete

M.200 and curing complete including the cost of

6 6.10 formwork but excluding cost of reinforcement for 4277.35 C.M.

reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass concrete

Providing and laying controlled cement concrete

M.200 and curing complete including the cost of

formwork but excluding cost of reinforcement for

7 1.10 reinforced concrete work in (C) 6289.27 C.M.

Slabs,landing,shelves,Balconies Lintels, Beams,

Girders and Cantilever upto floor two level.Beams at

Providing and laying controlled cement concrete

M.200 and curing complete including the cost of

formwork but excluding cost of reinforcement for

8 1.10 reinforced concrete work in (C) 6734.68 C.M.

Slabs,landing,shelves,Balconies Lintels, Beams,

Girders and Cantilever upto floor two level.Beams at

First Slab Level

Providing and laying controlled cement concrete

work M200 and curing complete including the cost of

9 2.10 form work but excluding reinforcement of reinforced 7386.13 C.M.

concrete work in ( B ) Columns, piller posts and struts

up to floor two level.

Providing and laying controlled cement concrete

M.200 and curing complete including the cost of

formwork but excluding cost of reinforcement for

reinforced concrete work in (C)

Slabs,landing,shelves,Balconies Lintels, Beams,

Girders and Cantilever upto floor two level. Slab

Providing IS mark TMT Bar FE 500/500D

reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm.

13 4.70 in foundation and plinth with necessory RCC bends at 4121.55 C.M.

required level by engineer in charge in Cement Mortar

1:6 (1- Cement : 6 -fine sand)(B) Conventional

(i) Half brick masonry in common brunt clay building

bricks having crushing strength not less than

14 17.80 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - 614.84 SMT

coarse sand ) in foundation and plinth (B)

Providing and applying 15mm. thick cement plaster in

single coat on brick/concretewalls for interior

15 93.50 plastering upto floor two level and finished even and 198.92 S.M.

smooth in (i) cement mortar 1:3 (1 cement :

Providing and applying 10mm. thick cement plaster in

single coat on brick/concretewalls for interior

16 11.10 plastering upto floor two level and finished even and 170.55 S.M.

smooth in (i) cement mortar 1:3 (1 cement :

Providing 20 mm thick double coat mala cement

plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm thick

cement plaster in cement mortar (1 Cement : 4 coarse

sand) in rough finishing and 8 mm thick top coat of

cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing etc.

Applying two coats of Birla (white cement based) or

Asian (acrylic lapy- putty) or equivalent & two coats

of primer of approved brand and manufacture on new

18 105.00 wall surface to give an even shade including 40.59 S.M.

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and of required

shade on wall surfaces to give an even shade, over

and including a priming coat with distemper primer

of approved brand and manufacture after thoroughly

brushing the surface free from mortar dropping and

other foreign matter and also including preparing the

surface even and sand papered smooth.on walls

Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and of required

shade on wall surfaces to give an even shade, over

and including a priming coat with distemper primer

of approved brand and manufacture after thoroughly

brushing the surface free from mortar dropping and

other foreign matter and also including preparing the

surface even and sand papered smooth.on cielings

Providing & applying single coat of textured at

external surface at all floor levels with three coats of

weather proof cement exterior paint of approved

standard brands make (Asian/Dulux/Narolac) at

outer side of the building on RCC or Masonary walls.

Rate to include for all labour, materials, staging,

21 67.40 scaffolding, cleaing, curing etc. application of texture 564.52 S.M.

after throughly brushing th`e surface to give an even

shade free from mortar dropping/other foreign

matter etc. complete. application of textures & paints

must be as per company's standard instructions.

Texture and colour selection as per approved by

engineer in charge.including primer.

P & L 24" x 24" vitrified 8 mm thick tile flooring over

20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for light

shade double charged. AntiSkid

Dado vitrifiedProviding and laying Vitrified tiles 8 to

10 mm thick , in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-coarse

sand) and jointed with white cement slurry

Providing and fixing 35 mm thick solid core flush

door of approved make both side lamination using

1mm thick approved laminate sheets with 6mm thk

moulding patti around flush hutter including fixing

SS hinges, 6 no. - hold fast of size 40 x6mm flat

300 mm long, wedges, keys, nails, catch screw,

lever latches , handle, aldrop, stoppers, etc and

cutting/ drilling of necessary holes in masonry/

concrete and grouting of holdfasts with (1:2:4)

cement concrete all as per drawing, specification and

direction of the Engineer, all materials, tools,plant

and labour complete c. (All fixtures & fittings

shall be stainless steel of approved

quality).approved by architect/Engineer

Incharge.including teak wood frame of size 60x120

FRP doorProviding and fixing FRP frame size 125x65

mm and 35mm thick FRP shutter with wood grain

raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with

injected polyurethene foam done in situ alongwith

embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & shutter is

to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with fastener sleeve &

alluminium fixtures & fastenings.

Providing & laying mirror polished granite stone slab

26 10.00 20mm (av.) thick for door/ window sill and jambs as 2171.50 S.M.

per design including half moulding at one side of sill.

Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x 1.2mm

27 2.00 @ Wt. 0.643 Kg/mt with colour anodized alluminium 1175.56 S.M.

frame for ventilation with 5 mm thick frosted glass as

details etc complete for Ventilation

Steel work, welded in built up sections framed work

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint. (A)In beams

28 2.20 and joists, channels angles Tees, flats, with connecting 9108.48 Q

plates or angle cleats as in main and cross beams. Hip

and jack rafters, purlins conneted to common rafters

Painting One coat of Primer on new steel and Painting

two coats (including priming coat) on new steel and

other metal surface with enamel paint, brushing,

29 6.00 interior to give an even shade including cleaning the 124.75 S.M.

surface an even shade including cleanicn the surface

of all dirt, dust and other foreign matter Including

One coat of Primer

Providing corrugated G.I. sheet of class-3 roofing fixed

with glavanished iron J or L Hooks, Bolts and nuts

8mm diameter with bitumen and G.I. limpet washer

or G.I. limpet washer. filled with white lead complete

excluding the cost of purlins, Rafters and Trusses.(1)

0.80 mm thick sheet.

Providing and fixing wsh down water closet

(European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1- fine sand) (Seal and cover

to be measured and paid for separately)(A) vitreous

China Pattern :(i) in white colour

Providing and fixing plastic seat and cover for wash

32 6.00 down water closer with C.P. brass hinges and rubber 291.33 Each

buffers. (B) Black plastic seal and cover.

Providing and fixing Urinal or approved quality

including conecting the Urinal with waste pipe , tap

etc. complete.(A) White earthenware flat back or

corner type size 430mm x 260mm x 350mm.

Providing and fixing Urinal of approved quality

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

Providing and fixing washbasin with single hole for

pillar trap at all floor level with C.I. or M.S. Brackets

painted white including cutting holes and making

good the same including (A) Vitreous china flat back

wash basin 550mm x 400mm size in white colour (a)

providing and fixing C.P. brass waste for wash basin

or sink(A) 32mm (b) providing and fixing M.I.fisher

union for wash basin or sink(A) 32mm (c) piller

tap,capstan head, screw down high pressurewith

screw shanks and back nuts for 15mm dia. for all floor

(d)brass screw down stop tap (e)Rubber plug for

sink or washbasin (f) chromium plated bottle trap

with necessary coupling of approved quality for wash

Providing and fixing PVC SWR Nanhi trap IS 14735 for

drain -100 mm diameter with jali of the following

36 10.00 nominal diameter of self cleaning design with C.I 585.37 Each

scead down or hinged grating including the cost of

cutting and making good the wall.

Providing and fixing to wall ceilling and floor

kg/cm2 working pressure polythelene pipes of the

following outside dia. low density complete with

special flage compression type fitting, wall clips etc.

including making good the wall ceilling floor (A)

Providing and fixing to wall ceilling and floor

kg/cm2 working pressure polythelene pipes of the

following outside dia. low density complete with

special flage compression type fitting, wall clips etc.

including making good the wall ceilling floor (A)

Providing and fixing S.W. Gully trap with C.I. gratting

brick masonary chamber and water tight C.I. cover

39 1.00 with frame of 300mm. x 300mm. size with standard 1246.92 Each

weight (i) square mouth trap(A) 100mm x 100 mm

Constructing brick masonary for under ground C.I.

inspection chamber and bends with bricks having

crushing strength not less than 35 kg/cm2 in c:m 1 :5

C.I. cover with frame 445mm x 610mm internal

dimension total weight of cover with frame to be not

less than 38 kg.(wt. or cover 23 kg. and wt of frame

40 1.00 15 kg.) R.C.C. top slab with 1:2:4(1 cement :2 course 2932.93 Each

sand : 4 grade stone aggregate 20mm size) foundation

concrete 1: 5: 10 inside plaster 15 mm thick with

cement mortar 1: 3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

comp. (i) inside dimension 455mm X 610mmX

Supplying and fixing reinforced concrete heavy duty

nonpressure pipes with collars for culverts carrying

heavy traffic as per IS 458-1991 specifications

including setting the pipes in C.M. 1:2 watering and

laying (to level or slopes) of class NP3 of following

internal daimeters.(i) 300mm dia.

Providing laying and jointing in true line and level

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost

of all materials.

Providing and laying and jointing in tube line and

level 25 mm dia U.P.V.C. Pipe (SCH -40 ) for cold

water including fitting make or equivalent as

approved by engineer In charge. Pipe shall be fixed on

43 28.00 the wall with the help of clamp at every two meter 91.84 R.M.

C/C or shall be concealed as directed including

necessary fitting etc. including testing of pipe and

joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing and laying and jointing in tube line and

level 15 mm dia U.P.V.C. Pipe (SCH -40 ) for cold

water including fitting make or equivalent as

approved by engineer In charge. Pipe shall be fixed on

44 52.00 the wall with the help of clamp at every two meter 72.65 R.M.

C/C or shall be concealed as directed including

necessary fitting etc. including testing of pipe and

joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing and fixing C.P brass screw down bib tap at

all floor level polished bright etc. comp. (i) 15mm dia.

Providing and fixing gun metal check or non return

46 1.00 full way wheel valve at floor levels,etc. complete.(C) 420.63 Each

Providing and fixing chromium plated brass half turn

47 3.00 flushcock at all floor level, of approved quality incl. 263.77 Each

fixing in pipe line etc. comp.(ii) 25mm dia.

Providing and fixing abonite ball cock of approved

48 3.00 quality as directed etc. comp..(B) Abonite (i) 25mm 102.91 Each

Providing and fixing in position cowl vent to pipes of

prince, suprim, jain make etc. comp. (B) 75mm. dia.

Providing and fixing in position cowl vent to pipes of

prince, suprim, jain make etc. comp. (C) 110mm. dia.

Providing erecting and fixing double coated Syntex or

equivalent PVC (ISI) mark water tank of reqd capacity

each with all necessary fitting and connection etc.

comp on terrace.

Providing and laying integral cement based water

proofing treatment including preparation of surface

as required for treatment of roofs, balconies, terraces

etc. consisting of following operations

(a) Applying and grouting a slurry coat of neat cement

using 2.75 kg/ sqm of cement admixed with

proprietary water proofing compound conforming to

IS : 2645 over the R.C.C. slab including cleaing the

surface before treatment.

(b) Laying cement conctrete using broken

bricks\brick bats 25 mm to 100 mm size with 50 %

of cement motar 1:5 ( 1 Cement : 5 Coarse sand )

admixed with proprietory water proofing compound

confiroming to IS : 2645 over 20 mm thick layer of

cemnt mortar of mix 1: 5 (1 cement : 5 Coarse sand )

admixed with proprietary water proofing compound

confirming to IS : 2645 to required slope adn treating

similarly the adjoining walls upto 300 m height

inclusing rouding of juction of walls and slabs.

.(C)After two days of proper curing appling a second

coat of cement slurry admixed with proprietary water

proofing compound I.S.2645

(d) Finishing the surface with 20 mm thick jointless

cement mortor of mix 1:4 admixed with proprietary

water proofing compound I.S.2645 and finishing the

surface with trowel with neat cement slurry & making

of (300 x 300)mm square

(e)The whole terrace so finish shall be flooded with

water for a min. period of two weeks for curing and

for final test. All above operation to be down in order

and as directed and specified by the engi.-in-charge.

With average thickness of 120 mm and minmum

thickness at khurra as 65mmCementconsumption

0.642 Bags / S.M.)

(d) Finishing the surface with 20 mm thick jointless

cement mortor of mix 1:4 admixed with proprietary

53 1.00 water proofing compound I.S.2645 and finishing the 5639.84 Each

surface with trowel with neat cement slurry & making

of (300 x 300)mm square

CCTV works (As per Market rates quotations)

Electrical Works

Add Contigency 2%

Municipal Engineer Chief Officer

Signature of the Gandevi Nagar Palika Gandevi Nagar Palika

Contractor. Gandevi Gandevi

Estimated Amount Put to

Put to Tander Rs.

Rebate % in total Amount

Rebate % in total Amount

In Words………………………………………

Signature of the Contractor. Chief Officer

Gandevi Nagar Palika

Note :- Gandevi

Note : All Works shall be carried out as Public works Department Handbook and other specifications pf Division or as directed.

GM\W ov ! AW] H SFD AF\WSFD lJEFUGL 5]l:TSF VG[ 0LJLhGGL ALÒ BF; lJUT D]HA VYJF ;]RGF 5|DF6[ SZL VF5JFG]\ ZC[X[P

Note : All the Column in Schedule should be filled in ink or ball pen and Total of the entires in last column

2 should be struck by the contractor under his signature.

GM\W ov Z VG;}lRDF\ AWF BFGFGL lJUTM XFCLYL EZJL VG[ K[<,F BFGFGL GM\WGM ;ZJF/M SZL SM\g8=FS8Z[ 5MTFGL ;CL SZJLP

Note : Rates quoted include clearance of site (Prior commencement of works and at its close ) in all respects and hold good for

3 work under all conditions,site,moisture,weather etc.

GM\W ov # 8F\S[,F NZDF\4:Y/GL sSFDGF\ VFZ\E[ VG[ 5]~ YFI T[ JBT[ f NZ[S ZLT[ ;FO ;]OL SZJFG]\ ;DFJ[X YFI K[ VG[ T[ NZ TDFD 5lZl:YTL 4 :Y/ 4E[H 4 CJFDFG lJU[Z[ C[9/ SFD

Note : To be continued on additional sheets, if found necessary.

GM\W ov $ H~Z H6FI JWFZFGF SFU/M HM0L RF,] ZFBJ]\

Note : Bidder have to deposit Dismantling Credit FDR/DD to nagar palika at a time of W.O and after disucting

5 dismantling credit from R.A.Bill 01 the FDR will be returned to bidder.