R/M of Type-II 6 Nos. and Type-III 12 Nos. Quarters NIFT complex at Kangra

Dismantling doors, windows and clerestory windows,ventilators etc.(wood or steel)shutters including chowkhats,architrave,holdfast and other attachments etc.complete and stacking within 50 metres lead of area 3.00 square metres and below as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead, for thickness of tiles 10mm to 25mm as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Dismantling G.I. pipes(external work) including excavation and refilling trenches after taking out the pipes, manually/ by mexhanical means including stacking of pipes within 50 metres, lead 15mm to 40mm nominal bore as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Dismantling C.I. asbestos rain water pipe with fittings and clamps including stacking the material with 50 metres lead: 75 to 80 mmdia pipe as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Dismantling C.I. asbestos rain water pipe with fittings and clamps including stacking the material with 50 metres lead:100 mm dia pipe as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Half brick masonry using common burnt clay building bricks in super-structure above plinth level to floor all level in cement mortar 1:4 (One cement isto four sand) and curing complete, .as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

15 mm (Fifteen milimetre) thick cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering up to all floor level including arises, internal angles, chamfers and rounded angles any girth and finished even and smooth with cement mortar 1:6 (One cement isto Six sand), as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Applying Birla J.k. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dirt, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government.

Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surface (two coats)to give an even shade after throughly brushing the surface to remove all dirt and remain of loose powdered materials as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x600x10mm (Six hundred into six hundred into Ten milimetre)vetrified altra double charge/ Ultra charge vitrified tilesKajaria/ Somany / Nitco/Jonson/Simpolo/ Rak in flooring, on a bed of 20 mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x600x10mm (Six hundred into six hundred into Ten milimetre)vetrified altra double charge/ Ultra charge vitrified tilesKajaria/ Somany / Nitco/Jonson/Simpolo/ Rak inskirting,riser of steps on a bed of 12 mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of JINDAL/Hindolo conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) :polyester powder coated aluminium(minimum thickness of polyester powder coating 50 (fifty) micron) for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron) as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of JINDAL/Hindolo conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) :polyester powder coated aluminium(minimum thickness of polyester powder coating 50 (fifty) micron) for shutters of doors,windows and ventilators i/c providing and fixing hinges. fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron) as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing fly proof galvanised M.S. Wire gauge to windows, clerestory windows and doors using wire gauge with average width of aperture 1.4mm in both direstions with wire of dia 0.63mm all complete with 12mm Aluminium beading with M.S. Flat 15x3mm (Fifteen into Three milimetre) and nuts and bolts complete (Area for payment shall be measured frant face only), as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 35mm thick factory made laminated veneer lumber door shutter conforming to IS:14616 and ADS 15:2001(part B), fixing with butt hinges of required size with necessary screws, all complete , (Note:- Butt hinges and necessary screws shall be paid separately) 12mm thick pre-laminated partical board(decorative lamination on both sides) grade-1, medium density flat pressed three layer particle board FPT-1 or graded wood partical board FPT-I, conforming to IS:3087, bounded with BWP type synthstic resin adhesive as per IS:848 and pre- laminated conforming to IS:12823, Grade I, Type-II marked as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 4mm thick Aluminium Composite panel(ACP) (Alstrong)that consists of a non-aluminium core bonded between two aluminium sheets in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass/stainless steel screws etc. complete .specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing stainless steel fittings in kitchens Drawers complete Bottel Basket 380x500x150as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing stainless steel fittings in kitchens Drawers completePlain Basket 380x500x100 as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing stainless steel fittings in kitchens Drawers completePlain Basket 380x500x150 as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing stainless steel fittings in kitchens Drawers complete Grain Plain Basket 380x500x200 as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing stainless steel fittings in kitchens Drawers complete Plain Basket 380x500x200 as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing stainless steel fittings in kitchens Drawers complete GlassBasket 380x500x100 as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing stainless steel fittings in kitchens Drawers complete Basket plain 200 as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing stainless steel fittings in kitchens Drawers completeCutlery W 380xD500x H100as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing stainless steel fittings in kitchens Drawers completeThali basket 380x500x200 as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 450mm long Stainless Steel drawer Channel in kitchen complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer(having brand logo with ISI.IS:3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000mm) with double speed adjustment with necessary screws etc complete as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 250x10mm (Two hundred fifty into Ten milimetre) anodized Size coloured anodized aluminium Tower bolts (Barrel type) with necessary screws etc. Complete, as per specification, ISI Marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing150x10mm (one hundred fifty into Ten milimetre) anodized Size coloured anodized aluminium Tower bolts (Barrel type) with necessary screws etc. Complete, as per specification, ISI Marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 125mm (One hundred twenty five milimetres) size aluminium anodized make of PILOT/ Sheel handles anodized transparent or dyed to required colour and shade with necessary screws ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) size aluminium anodized make of PILOT/ Sheel handles anodized transparent or dyed to required colour and shade with necessary screws ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium hanging floor door stoper,ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868)transparent or dyed to required colour ansd shade, with necessary screw etc complete. single rubber stoper as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium hanging floor door stoper,ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868)transparent or dyed to required colour ansd shade, with necessary screw etc complete. Twin rubber stoper as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Pointing on stone work with cement mortar 1:3(1cement :3 fine sand)Flush/ Ruled pointing as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Excavation in foundation, trenches etcetra in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths any quantum of water including slush which may arise during de-watering or removal of slush, lift upto any height stacking the excavated soil not more than 3 metres (Three metres) clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specification, approved drawing design as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within leads, lifts and other inciddentals. Ther ate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Boulder filling dry hand packed tightly as in under floor The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate including octroi, royality, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 ( One Cement isto four Sand isto eight graded crushed stone aggregate 40 mm (forty milimetre) nominal size mechanically mixed and curing complete excluding the cost of form work. in foundation and plinth, as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made(ISI) by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. including carriage of material with in all leads,lifts and other incidental.The rate including of octroi,royality,Malkhana, toll tax, GST or other taxes imposed by the government.

Providing and laying cement concrete 1:2:4 M-20(one cement isto two sand isto four graded stone aggregate 20mm (Twenty milimetre) nominal size. Laid in one layer finished with a floating coat of neat cement 40mm (Forty milimetre) thick flooring including carriage of material within all leads and lifts and other incidentials. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, racking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish all complete. as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Constructing manhole in brick masonary in cement mortar 1:4(1cement 4 coarse sand)with R.C.C.top slab in 1:1.5:3mix (One Cement: 1.5 Sand: Three graded crushed stone aggregate 20mm (Twenty milimetre) nominal size), foundation concrete 1:4:8 (One Cement: Four Sand: eight graded crushed stone aggregate 40mm (Forty milimetre) nominal size), inside plastering 12mm (Tweleve milimetre) thick with cement mortar 1:3 (One Cement: Three Sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ((One Cement: Two Sand: Four graded crushed stone aggregate 20mm (Twenty milimetre) nominal size) finished smooth complete including curing and testing Inside size 800mmx800mm (Eight hundred milimetre into Eight hundred milimetre) and 1000mm (One thousand milimetre) deep including C.I. (Cast Iron) cover with frame, (Light duty single seal pattern –I) 455mmx610mm (Four hundred fifty five milimetre into Six hundred ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23kg (Twenty three kilogram) and weight of frame 15kg (Ffteen kilogram) with 300mm (Three hundrede milimetre) thick walls of squared rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (One Cement: Three Sand), as per specification, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing white viterous china pedestial tpye water closet MATRIX EWC with jet pressure ( European type) with Jet pressure and ,10 (ten) litre low level PVC dual flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm (Forty milimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required of HINDWARE /CERA/JAQUAR of Stat white/Snow white shade including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x480 mm (six hundred into Four hundred milimetre) vitreous china wash basin with single hole No. 10072 (ten thousand Seventy two) Cera or Hindware/Jaquar of star shite/Snow white for pillar tap with C.I. (Cast Iron) or M.S. (Mild Steel) brackets painted white including cutting holes and making good the same but excluding fittings, 15 mm C.P brass pillar tap as per specification including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and testing of joints complete as perspecification including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government. 15 mm nominal outer dia pipe.

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and testing of joints complete as perspecification including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government. 20 mm nominal outer dia pipe.

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and testing of joints complete as perspecification including carriage of materials within all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana,Tol tax, GST or any other taxes imposed by the Government.32 mm nominal outer dia pipe.

Providing and fixing C.P. Brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore. as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing CP Brass Single lever Non telephonic wall mixer of quality and make as approved by Engineer- In- Chief 15mm nominal dia as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing PTMT Soap Dish Holder having length of 138mm, breadth 102mm, height of 75 mm with concealed fittings arrangement not less then 106gms. as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. brass shower rose with 15 or 20mm inlet: including consealed 150 mm diameter. as per specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

prviding and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450mm long towel rail with total length of 495mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms., as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fxing P.V.C. Waste pipe for sink or wash basin including P.V.C. Waste fittings complete flexible 32mm Dia as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fxing C.P. grating of approved quality and colour Circular type 100mm(Hundred millimetere) nominal size . as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing mirror of superior glass(of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing circular shape 450mm dia.as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40mm long screws,rawl plugs etc, complete.as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to: 15mm nominal bore.as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 8mm dia C.P./S.S Single Hand jet with flexible tube up to 1 metre long and wall hooks Health Faucet .as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face unplasticised rigi PVC rain water pipes conforming to IS:13592 type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expension,(1) Single socketed pipes.(75 mm diameter) .as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face unplasticised rigi PVC rain water pipes conforming to IS:13592 type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expension,(1) Single socketed pipes.(110 mm diameter) .as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing ball valve of approved quality, High or Low pressure, with plastic floats complete(15mm nominal bore) .as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing ball valve of approved quality, High or Low pressure, with plastic floats complete(20 mm nominal bore) .as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC floor trap ISI marked of self cleaning design includuing fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete110x90mm .as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete(110 mm dia). .as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete(75 mm dia). .as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Riged PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming IS:5382, Leaving10mm gap for thermal expansion.(Coupler 75mm ).as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Riged PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming IS:5382, Leaving10mm gap for thermal expansion.(Coupler 110 mm ).as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Riged PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming IS:5382, Leaving10mm gap for thermal expansion.(Single tee with door 75x75x75mm ).as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Riged PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming IS:5382, Leaving10mm gap for thermal expansion.(Single tee with door 110x110x110mm ).as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Riged PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming IS:5382, Leaving10mm gap for thermal expansion.(Single tee without door 75x75x75mm ).as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Riged PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming IS:5382, Leaving10mm gap for thermal expansion.(Single tee without door 110x110x110mm ).as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Riged PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming IS:5382, Leaving10mm gap for thermal expansion.(Bend87.5 Degree 75 mm).as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Riged PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming IS:5382, Leaving10mm gap for thermal expansion.(Bend 87.5 Degree 110 mm).as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Riged PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming IS:5382, Leaving10mm gap for thermal expansion.(Shoe plain 75mm).as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing on wall face unplasticised PVC moulded fittings/ accessories for unplasticised Riged PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming IS:5382, Leaving10mm gap for thermal expansion.(Shoe plain 110 mm).as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, GST or any other taxes imposed by the Government.