SR to repairing of mamlatdar office at valsad (Toilet repair plaster work colour work flooring work Door window work plumbing work and other misc.work)

Name of Work :-

SR to repairing of mamlatdar office at valsad (Toilet repair, plaster work, colour work, flooring work, Door

window work, plumbing work and other misc.work)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

m In figure according to

No. Item of work Rs. Ps. estimated

1 Dismentaling tiled of stone floors laid in mortar including stacking of 415 Sqmt 48.21

serviceable materilas and disposal of unserviceable materials with all lead

2 Demolition and disposal of unserviceable materials with all lead and 10 Cumt 609.26

lift.(i) Lime concrete.

3 Dismantling santtary fittings like wash basin, W.C.Pan Indian and 24 Nos. 405.65

European type, flushing tank etc. including stacking the materials with all

4 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings 248.2 Rmt. 75.08

and clamps including stacking the materials with all lead and lift ( for any

5 Providing and laying water proofing treatment by conventional method 50 Sqmt 945.36

including cleaning the slab surface by wire brush as directed including

provding first layer of C.M. 1:4 of 40 mm thickness mixed with water

proofing compound at rate prescribed by manufacturer, including putting

of brick bats of average thickness 40 mm Well immerssed in water laid

uniformly on first layer of mortar including applying cement slurry @ rate

of 0.08 bag/sqm. on fixed layer of brick bats including maintaining

necessary slope, in second layer 40 mm thick C.M 1:4 mixed with water

proofing compound as directed, including finishing smooth with cement

slurry as directed complete.

6 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring treads 99 Sqmt 970.07

of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1-

cement:3-coarse sand)finishing with flush pointing in colour cement

slurry etc. complete. Colour and Shade approved by Engineer-In-Charge

7 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 316 Sqmt 1441.22

8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on

10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed

with white cement slurry.

8 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 40 Rmt. 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost

of all materials.

9 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 40 Rmt. 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost

of all materials.

10 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 75 Rmt. 148.12

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of all

11 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. 75 Rmt. 195.67

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

12 Providing erecting and fixing double coated (ISI) water tank of required 5000 Ltr. 3.95

capacity each with all necessary fittings and connection etc. complete on

13 Providing and fixing ball cock of approved. quality as directed.(A) Copper 5 Nos 189.84

Metal (ii) 50mm dia.

14 Providing, laying and jointing in true line and level 160 diametre U.P.V.C 60 Rmt. 831.22

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

15 Providing, laying and jointing in true line and level 75 mm dia. UPVC 43.2 Rmt. 698.92

SWRType B pipe conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp at every 2000 mm c/c or shall be conceled in walss as

directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

16 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 50 Rmt. 836.73

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

17 Providing and fixing in PVC SWR cowel went 75mm dia to pipes.(B) 5 Nos 15.66

18 Providing and fixing in PVC SWR cowel went 110mm dia to pipes.(B) 5 Nos 28.79

19 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 8 Nos 571.08

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of cutting

and making good the walls.

20 Providing and fixing screw down bib taps of following size.(B) Brass 12 Nos. 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

21 Providing and fixing brass screw down stop tap.(A) 15mm dia. 8 Nos 205.83

22 Providing and fixing pillar tap, capstan head, screw down high pressure 8 Nos 308.73

with screws, shanks and back nuts. (i) 15mm dia.

23 Providing and fixing wsh down water closet (European type, W.C. Pan) 8 Nos 1303.71

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately (A) vitreous China Pattern :(i) in white

24 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of 8 Nos 2344.42

C.I. or Mild brackets, complete with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball valve with polythene float, C.P

brass handle unions and couplings for connections, with inlet, outlet and

overflow pipes, 40mm dia. porcelain enamelled flush bend including

cutting holes in walls and making good the same connecting the flush

bend with cistern and closet (overflow pipe to be measured and paid for

separately)(A) Vitreous China (I) In white colour

25 Providing and fixing plastic seat and cover for wash down water closer 8 Nos 291.33

with C.P. brass hinges and rubber buffers. (B) Plastic seal and cover.

26 Providing and fixing Jet spray heavy duty with S.S. Braided hose 60 cm 8 Nos 355.52

long with wall hook and other accessories etc. completed

27 Providing and fixing wash basin with single hole for pillar tap with C.I. Or 8 Nos 1961.83

M.S. brackers painted white including cutting holes and making good the

same including pillar tap, Brass waste, stop cack , bottle trap and M I

fisher union fittings :(ii) Flat back wash basin 500mm x 400mm size

including all necessary fittings etc complete shade and pattern as

approved by Engineer in charge.

28 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 8 Nos 833.73

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

29 Providing and fixing Urinal of approved quality including connection with 8 Nos 1550.99

trap and with integral longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

30 Providing and fixing polished 18 mm thick black granite with full round 4.4 Sqmt 2650.24

edge and double side polished of approved quality in between urinal and

fixing with cement slurry & adhesive including moulding of both exposed

edges as directed by engineering in charge etc. complete.

31 Providing and fixing S.W. gully trap with C.I. grating brick masonry 8 Nos 1246.92

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight (i) Square mouth traps (B) 150mm x 100mm

size P or R type

32 Removing and scraping of old deteriorated plaster of any thickness 637 Sqmt 19.57

fromm wall / R.C.C member including stacking of serviceable material and

disposal of unserviceable from site of work with all lead and lift

33 Providing 15mm thick cement plaster in single coat on Rough (Similar) 281 Sqmt 153.20

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish

etc. comp. For Ground floor

34 Providing 15mm thick cement plaster in single coat on Rough (Similar) 269 Sqmt 176.59

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish

etc. comp. For First Floor

35 Providing 15mm thick cement plaster in single coat on Rough (Similar) 19 Sqmt 199.98

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish

etc. comp. For Second Floor

36 Providing 10 mm. Thick cement plaster in single coat for plastering on 30 Sqmt 140.95

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) etc. complete comp. For Ground Floor

37 Providing 10 mm. Thick cement plaster in single coat for plastering on 36 Sqmt 164.34

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) etc. complete comp. For First Floor

38 Providing 10 mm. Thick cement plaster in single coat for plastering on 2 Sqmt 187.73

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) etc. complete comp. For Second Floor

39 Removing dry or oil bound distemper by a washing and scraping and sand 2216 Sqmt 11.30

papering the wall surface smooth including necessary repairs to scratches

40 Removing dry or oil bound distemper by a washing and scraping and sand 1447 Sqmt 12.90

papering the ceiling surface smooth including necessary repairs to

scratches complete.

41 Applying two coats of putty & two coats of primer of approved brand and 3663 Sqmt 40.59

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

42 Wall painting (two coats) with plastic emulsion paint of approved brand 2216 Sqmt 80.35

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

43 Wall painting (two coats) with plastic emulsion paint of approved brand 1447 Sqmt 85.76

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

44 Painting Two coats (excluding priming coat) on previously painted steel 278 Sqmt 94.82

and other metal surface with enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

45 Removing, Repairing and Refixing Old existing wooden door shutter 21 No 1808.91

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like

Hinges, 1 Stoppers, 1 Aldrop , 2 Handle & 1 lock etc. and as directed by

engineer in charge etc comp.

46 Removing, Repairing and Refixing existing Alluminium window frame with 51 No 580.75

glass of all size shutter/frame, replacing all old Mosquite Net fixtures with

new locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the window,

all materials, transport cost, taxes etc.and as directed by engineer in

charge etc complete.

47 Removing, Repairing and Refixing existing Alluminium fix ventilation 12 No 348.45

frame with glass of all size shutter/frame, replacing all old fixtures with

new locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the

Ventilation, all materials, transport cost, taxes etc.and as directed by

engineer in charge etc complete.

48 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 10 Cumt 3683.34

4- graded stone aggregates 20 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

In Words Sixteen Lakh Seventy Six Thousand Nine Hundred Forty one Rupees And Twenty Seven Paisa Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 1676941.27 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Credit Value of Dismentalled Materials of Amount Rs.13118.00 (In Words Thirteen Thousand One Hundred Eighteen

Rupees And Zero Paisa Only.) shall be recovered from the 1st Running Bill of the Contractor.

2 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

3 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

4 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor

under his sign.

5 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

6 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

7 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to

8 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other Construction

works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated 9/12/2005

notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no GWA/2004-

9 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

10 Contractor are advised to visit site before loading tender rate.

11 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his

12 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

13 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

14 GST and Income tax TDS will be deducted at a source while making payments of bills.

15 GST will be paid extra as per Govt. amendment.

16 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

(A) materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division