SPECIAL REPAIR TO CIV DEF STAFF MD ACCN BLDG NO EW-178 AND EW-179 IN MT COLONY AT IMA DEHRADUN.

Amount

M&L for Pre-painted green colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed.

S&F MS angle/Tee/Hollow tublar section as in column, main or cross beams, hip and jack rafter, purlins, roof trusses (framed) where connected to common rafters and etc conforming to Fe-290 Gde E-165 all as directed by Engr-in-charge

Excavating in post holes soft/ loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

M&L for PCC 1:3:6 type C2 (using 40 mm graded aggregade ) in foundation for post holes.

M&L for Preparation of new untreated steel or iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over and including a coat of red oxide primer.

M&L for 300x300x25mm thick (M-35) glossy finish polished red color Chequered cement concrete tile of any pattern as decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile completel as specified and directed.

M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floor complete all as specified and directed

S&F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 0.5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed .

S& F Factory made single extruded WPC (Wood Polymer Composite) solid Molded flush door shutter both side laminated of 24mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S& F Factory made extruded WPC (Wood Polymer Composite) Double Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 0.5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed .

S&F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,minus 0.5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed .

S& F Factory made 35 mm thick single extruded WPC (Wood Polymer Composite) solid Moulded Flush Door Shutter with both side laminated of required size with 2.4 or 6 rised panel design on front side with 10mm deep mould on single side with grain texture of comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately

M&L 35mm thick factory made solid WPC (Wood plastic composit) semi gauged door shutter with both side lamination, single pieces minimum density of 600 kg/cum with wire mesh in any number of division with (Frame size middele or lock rail rail 150mm to 250mm wide, Stiles, top and freeze rails 100 to 120 mm wide and glazing bar 75 mm wide, including stainless steel wire mesh shall be fixed with 15 mm MS Square tube and covered with PVC moulded bedding in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again of the shall be as per manufacture instruction complete all as specified and directed. Note:- S.S butt hings and SS Screwes shall be measured and paid seprately.

S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed

S&F Steel window factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed

M&L for box type Steel ventilators with top hung shutter including hinges, steel hook & eye complete all as specified and directed

S&F Mild steel door shutter two leaves with frame of 1 mm thick MS steel (all around) and leaves of 1.00 mm thick MS steel all as per Godrej Pattern with three way locking arrangement with brass lock and C P handle with duplicate keys including two costs of spray painting over a coat of red oxide primer complete in existing cup boards fixed with necessary nut bolts including embedding in PCC 1:2:4 incl taking down existing chowkhats or frame with shutters complete all as specified and directed Note.- Area of opening shall be measured for payment

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each with shutter (without taking off shutters from the frame.

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed

S&F 3 mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, complete all as directed.

S&F 4 mm thick frosted glass, ordinary quality and glazing with oil putty in square of any size pane and fixed all as specified.

M&L for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed

S&F 100 mm size butt hinges medium weight stainless steel complete all as specified and directed by Engineer-in-Charge.

S&F 250mm long aluminium anosized sliding door bolt with hasp and staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.

S&F Alumnium anodised barrel tower bolt 200 mm long extruded section

S&F Extruded aluminium alloy handle 150 mm long fabricated type anodised

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard rubber bush in door, complete all as specified and directed

S&F 15mm bore long bib tap chromium plated with wall flange and aerator fixed complete all as specified and directed.

S &F 15 mm dia concealed stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron or for union complete all as specified and directed.

S & F15 mm dia fancy Type CP angle valves cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron or for union.

Supply and fixed PVC low level flushing cistern 10 Ltr capacity symphonic action type white as approved, ball valve float valve and handle incl bracket complete.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm

S&F cast iron body Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Supply and fixed vitreous china wash hand basin, white size 450x300mm incl bracket, waste coupling and waste pipe 32 mm dia complete.

Supply only brass CP pillar taps 15mm bore with capstan head, screwed down high pressure with orwithout lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe

S & F brass chrominium plated tubular towel rail 20mm dia ,D type, 60cm long between flanges complete all as specified and directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F chromium plated brass shower roses with or without swivel joints, any shower Arm complete all as specified and directed by EIC.

Supply and fixed CP grating 100 mm dia complete all as specified and directed.

M&L for green marble work 18 to 20mm thick (table rubbed and polished) in cooking platforms, flooring ,skirting ,window cill & stepes and including 15mm thick screed bed / rendering in CM 1:6 complete

Supply and fixed of vitreous china squatting pan 'Orissa pattern' size 580 x 440 mm white with integral foot rest including replacement of 'P' or 'S' CI trap, concrete bedding and making good floor complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed pressure rating 6 Kg/Cm2 in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

S&F 110 mm dia PVC (SWR) pipes single socketed pressure rating 6 Kg/Cm2 in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed.

S&F PVC (SWR) bends with access door in any radius 110mm bore complete all as specified and directed

S&F PVC (SWR) bends with access door in any radius 75mm bore complete all as specifed and directed

S & F PVC (SWR) reducers 75mm bore complete all as specifed and directed

S & F PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.

S & F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed.

M&L for DWC (Double wall coruggated) HDPE pipes of size 150mm (ID) confirming to IS 16098 Part-II of strength/ stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed.

4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubish off the premises complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone agg) as in flooring 25mm thick etc complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) (premium quality) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) (premium quality) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed.

M&L Glazed ceramic coloured tiles of premium quality of size 450x300 x 7mm , as on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick rendring in CM 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles of premium quality 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

S&F in repair kitchen sink (stainless steel) made up of stainless steel 1 mm thick sheet with plug wasters and wasted incl bedding in cement mortar on to dwarf wall or fixing cantilever brackets connecting union to pipe over all size 915x460mm, bowl size 410x330x160mm incl 32mm dia waste pipe complete all as specified and directed.

S & F Stainless steel curtain Rod Fancy type 25 mm Bore and 1mm thickness including a pair of brackets, complete all as specified and directed.

S&F Decorative fancy type Stainless steel finals , complete all as directed.

Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Brick work using sub class “B” bricks straight or curved on plan exc 6 metre mean radius built in CM 1:4 ( Old size brick) including demolition of old brick work complete all as specified and directed.

Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius in half brick thick wall built in CM (1:4) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

Taking down cement or cement lime plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc.

M & L Rendering 15 mm thick on brick or concrete surface,Drain , Manhole etc in CM (1:4) , surfaces finish even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick plaster on other then fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed.

Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed. (work to be carried upto a height of 7.50m high.

M&L for prepration of new / scraped surface of wall / ceilling and applying 2 mm thick wall care putty in two coat as per manufacturer's instruction complete all as specified and directed.

M&L for applying two coats of weather proof exterior emulsion paint (Apex of Asian, weather coat of Berger) of any tint over a priming coat on wall, chajjas, facia etc complete all as directed.

M&L for two coat oil bound distemper over a coat of primer any tint on walls and ceiling complete all as specified in SSR Part I and directed by Engr-in-Charge. (Note : Applying coat after completion of surface as per item No 68 as above and stage has to be passed by Engr-in-charge before laying coat complete all as specified and directed.) OBD to be applied from company approved applicator

S & F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe, cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) complete all as directed.

S & F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe,cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) complete all as directed.

Repairing to existing door/ window chajjas, roof slab bottom upto 3.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating over and including priming newly plastered/concrete surface by applying one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified and directed (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Note: Reinforcement if required shall be measured and paid separately under respective.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC (1:1½:3) using 20mm graded crushed stone aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like including demolition of existing R.C.C complete all as specified and directed.

M&L for Precast RCC 1:2:4 Type B-1( using 20 mm graded crushed stone aggregate} as in cover slab, set and jointed in CM 1:4 complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately under respective items of this BOQ)

M&L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains including demolition and taking out of existing cement concrete of any description complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed.

Cutting into exisiting manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching and forming channels and reforming benching etc complete in PCC 1:2:4 type B1 smooth finish complete 150mm dia & up to 300 mm dia complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) 75 mm thick as in plinth protection surface finished even and smooth without using extra cement.

M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in coping, benching, cills, PCC gola, holdfast and the like including weathering, slightly rounded or chamfered angles and throating, including necessary from work including demolition of existing old concrete etc complete all as specified and directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

S & F PVC water tank rotational moulded polythylone triple layer white water storage tank (cylindrical vertical with closed lid hoisted and fixed in position) 500 ltr capacity complete all as specified and directed by EIC.

Taking down of carefully unserviceable Aluminium/copper point wiring (light, fan socket or power) complete with fitting such as switches, ceiling rose lamp holder, sockets, fan regulators, SK/FTL light fittings etc removing materials for store for keeping in safe custody or for taking credit (credit for above items should be taken as per conditions separately) and making good disturbed surfaces of walls, floors etc as specified and directed.

M&L for modular point re-wiring with single core PVC insulated unsheathed 1100 volt grade FRLSH cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 25 mm dia, concealed conduit wiring in walls and surface with GI saddles GI screws, rawl plugs in ceiling or roof if not possible including Tee, Junction boxes and provision of modular flush metal boxes, inner and outer plate suitable for modular switch, socket and fan regulator as per site requirement and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade FRLSH cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for one light/Fan point controlled by one Switch. Make of cable: Polycab/Anchor/Havells , Make of conduit: Finolex/Polycab/AKG . Notes: 1 The contract site mainly comprises of OTMs Accn where point wiring may exceed its standard length. 2. The standard safety equipments and tools & plants including ladders etc to electricians / helpers will be provided by the Contractor without any additional cost to the department . 3. The contractor will make good of disturbed surfaces with material (incl plaster,putty) required to matchup with existing surfaces without any additional cost to the dept. This condition applies to all the materials in the BOQ.

All as per Srl item No 86 above, but for point wiring for 5 pin switch socket outlet, 5/6 Amps on same board with other switches complete all as specified and directed.

All as per Srl item No 86 above, but for point wiring for 5 pin switch socket outlet, 5/6 Amps on independent board complete all as specified and directed.

All as per Srl item no. 86 above, but for one power point 3 pin 15 Amps socket out let PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4 Sq mm (Nominal area) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4 Sq mm (Nominal area)cable common connected to earth dolly, all as specified for one 3 pin 15 amps socket outlet point controlled by one switch complete.

All as per Srl item No 86 above, but point wiring for one bell/buzzer point controlled by one push button on the same board with other switches or independent complete all as specified and directed.

S&F modular switch single pole one way 6/10 amp white in colour complete all as specified and directed by Engr-In-Charge. Make - Havells/Legrand/Indoasian

S&F modular switch single pole one way 6/10 amp white in colour enclosed in gang box waterproof complete all as specified and directed by Engr-In-Charge. Make - Havells/Legrand/Indoasian

S&F modular switch single pole one way 16 amp white in colour complete all as specified and directed by Engr-In-Charge. Make - Havells/Legrand/Indoasian

S&F modular bell push, 6 amp 1 module 240 volts white in colour complete all as specified and directed by Engr-In-Charge. Make - Havells/Legrand/Indoasian

S&F door bell ding dong type, AC, 240 volts, single pole complete all as specified and directed by Engr-In-Charge.

S&F modular socket outlet 2/3 pin combined 2 module 16 amp white in colour complete all as specified and directed by Engr-In-Charge. Make - Havells/Legrand/Indoasian

S&F modular socket outlet 2/3 pin combined 2 module 6 amp white in colour complete all as specified and directed by Engr-In-Charge. Make -Havells/Legrand/Indoasian

S&F ceiling rose 3 phase pvc/polycarbonate, isolated body white in colour complete all as specified and directed by Engr-In-Charge. Make: Anchor/Crabtree/Ess Ess Kay

S&F angle holder, insulated polycabonate body with back plate white in colour suitable for batten fittings including one number LED lamp 9 watt complete all as specified and directed by Engr-In-Charge. Make of holder: Cona/Orient/Goldmedal Make of Bulb: Havells/Crompton/Philips

S&F modular fan step regulator 120 W 2 module white in colour complete complete all as specified and directed by Engr-In-Charge. Make -Havells/Legrand/Indoasian

S&F LED tubelight batten fitting 20 Watt made of aluminium housing suitable for fixing on walls/ceiling, warm/natural/cool white as per requirement at site complete all as specified and directed by Engr-In-Charge. Make: BRIGHT LINEA of Crompton/LUMILINE PLUS NEO of Havells/ Essential SmartBright Batten of Philips

S&F LED flood light fitting 50 Watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection suitable for fixing on walls, warm/natural/cool white as per requirement at site complete all as specified and directed by Engr-In-Charge. Make: ROVER of Crompton/JETA QUANTO PLUS of Havells/Uniflood of Philips

S&F LED tubelight batten fitting 10/12 Watt made of aluminium housing suitable for fixing on walls/ceiling including connections, warm/natural/cool white as per requirement at site complete all as specified and directed by Engr-In-Charge. Make: Trim Linea Neu of Crompton/SmartBright of Philips/ENDURA LINEAR NEO of Havells

S&F plug and socket metal enclosure box of module (2P+E- SP), IK 08, supplied with Neutral Links complete with one MCB SP 20 amp,240 Volts recess mounted with chained metal cover for the socket outlet complete all as specified and directed by Engr-In-Charge.Make: Legrand/Siemens/L&T

S&F LED bulk head fitting 10 W including connection complete all as specified and directed by Engr-In-Charge.Make- STUD of Crompton/RUGBY GENX 10 of Havells or equivalent in Philips as approved.

S&F in repair sub main wiring with PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in and including rigid PVC conduit of size not less than 25 mm dia in concealed / surface as required at site including one run PVC insulated unsheathed cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB including taking down old unsv submain wiring of following sizes complete all as specified and directed. Make of wire: Havells/ Polycab /Anchor Make of conduit: Finolex/Polycab/AKG Note: (i) Two/Four run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc. (iii) Phase sequence colour code must be follow i.e Phase( Red) and Neutral ( Black) In colour and for three Phase RYB For phase and black for neutral.

2 x 6 Sqmm + 1 x 6 Sqmm

2 x 4 Sqmm + 1 x 4 Sqmm

S & F in repair VTPN Distribution boards epoxy powder coated fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with fully insulated 250 Amps copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 IK -09,415 volt with provision for 100 Amp MCCB FP as incomer and SP MCBs or TP MCBs as per site requirement (or any combination of SP/TP MCBs) outgoings of following capacity .

4 Way VTPN DB (FP MCCB + 12 MCBs). Make: Indoasian/Legrand/HPL

S&F MCCB 100 Amps, 4 pole with rupturing capacity 16 KA, ICS=100% ICU at 415 volts with thermal-magnetic release and adjustable overload setting complete all as specified and directed of following capacity. Make: Indoasian/Legrand/HPL

S&F MCB Distrubtion Board (DB) complying with IEC 61439 -1 & 3., sheet metal enclosures double door with provision for 01 x 40 to 63 A SPN MCB as incoming and MCB SP 6 to 32A as out going as per way of DB.The DBs should be supplied with tin platted insulated copper bus bar rated for 200A. 240 volts 2 in 1 shutter (Metal Door) with IK09 type with blanking plates where required and IP 43 degree protection, the DB door should be hinged type and possible to reversible at site.The DB door shall have overhang, to gel with wall properly.The DB shall be supplied with all insulated N. Bar riveted on DIN channel frame and should not restrict cable entry from top or bottom.The DB shall have plastic knobs on shield to hold complete all as directed of following capacity. Make: Indoasian/Legrand/HPL

12 way SPN DB.

S & F MCB SP complying to IS/IEC 60898, 240 volts 'B' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable complete all as directed of follwing capacity: Make: Indoasian/Legrand/HPL

MCB SP 6 to 32 Amp, 240 volts

MCB SPN 40 Amps, 240 volts

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (1991) and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20 mm bore medium grade etc complete, all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge.

Supply and fix exhaust fan, steel body AC single Phase 230V of size 300m sweep with blades and frame and louvers alongwith making circular holes of suitable size for mounting fan and making good of disturbed surface complete all as specified and directed. Make: Havells/Crompton/Usha Note: The old unsv exhaust fans shall be Govt's property and the same shall be removed at site and be deposit in MES store yard.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make: Havells/ Crompton/Usha Note: The old unsv ceiling fans are kept in custody in MES store and are not granted as credit.

Shri Radhey Associates (BID ID -3368871)

ACE BUILDERS AND CONTRACTORS (BID ID -3372509)

Pragati Enterprises (BID ID -3368473)

Meher enterprises (BID ID -3368413)

M/S C S AITHANI (BID ID -3376861)