Providing & erecting mortuary chamber (40 Body) at GMERS Hospital Campus Navsari. Ta & Di- Navsari.

MR Item Description Qty Unit Rate Rupees in words Amount

Suppy, Installation, Testing and Commisioning of 6 body mortuary cabinate of approx.

Force draft type PUF Panel: 80mm thick PUF panel with both side S.S -304 grade

sheet of 0.5 mm thickness & PUF density should be 40 kg/m3 Drawer Tray: Made with

high grade SS 304 box pipe. MS powder coated trolly mechanism along with ancillary

material SS Tray, Temperature: -8 C to +8 C, Door: Overlap type door with heavy duty

hinges & Handles with closer along with push type gasket for easy operation Size: 32”

X 32”, Lock SS: Individual lock & Key for each door, Identification: Each Window

should be facilitated for Body Identification tag (replaceable),Vapor proof lights,

Refrigeration System: Air Cooled, Split Type and Capable to run at minimum 45 deg C

Ambient with CFC free refrigerant gas R407C/R404A for low maintenance. Rupees Five

Compressor Type : Hermetic reciprocating/scroll type compressor, Indoor Unit: SS Lakh(s) Ninety Five

tube & Copper fins type Indoor Unit with SS casing capable to maintain low relative Thousand Nine

humidity.Refrigerant Pipe IDU to ODU up to 5 mtr :SS/Copper inner grooved, Power: Hundred Only

415 V, 3 Ph, 60 Hz, Temperature achievement and retention : Ref. System should be

able to achieve temperature within 90 minutes in load condition and can retain

temperature up to 6 hours in case of power loss. Control Panel: Digital Temperature

display with microprocessor-based controller with additional temperature display &

alarm indication with buzzer at mortuary Chamber surface.

Suppy, Installation, Testing and Commisioning of 4 body mortuary cabinate of approx.

Force draft type PUF Panel: 80mm thick PUF panel with both side S.S -304 grade

sheet of 0.5 mm thickness & PUF density should be 40 kg/m3 Drawer Tray: Made with

high grade SS 304 box pipe. MS powder coated trolly mechanism along with ancillary

material SS Tray, Temperature: -8 C to +8 C, Door: Overlap type door with heavy duty

hinges & Handles with closer along with push type gasket for easy operation Size: 32”

X 32”, Lock SS: Individual lock & Key for each door, Identification: Each Window

should be facilitated for Body Identification tag (replaceable),Vapor proof lights,

Refrigeration System: Air Cooled, Split Type and Capable to run at minimum 45 deg C Rupees Four

Ambient with CFC free refrigerant gas R407C/R404A for low maintenance. Lakh(s) Ninety Four

Compressor Type : Hermetic reciprocating/scroll type compressor, Indoor Unit: SS Thousand Nine

tube & Copper fins type Indoor Unit with SS casing capable to maintain low relative Hundred Only

humidity.Refrigerant Pipe IDU to ODU up to 5 mtr :SS/Copper inner grooved, Power:

415 V, 3 Ph, 60 Hz, Temperature achievement and retention : Ref. System should be

able to achieve temperature within 90 minutes in load condition and can retain

temperature up to 6 hours in case of power loss. Control Panel: Digital Temperature

display with microprocessor-based controller with additional temperature display &

alarm indication with buzzer at mortuary Chamber surface.

Total Amount (without GST) in Rs.

Total Amount (without GST) in Rs.

Estimated Amount

Amount Put to tender Rs. ………………………………………….

Net Total Rs. ………………………………………….

Rebate in Tender …………………………………………………………………….

All works shall be carried out as per public works department handbook and other specification of division or as Directed

All the columns in Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his singature.

Rate quoted include clearance of site( prior commencement of work and at its close) in all respects and hold good for work under all condition, site, moisture,

To be continued on additional sheets, if found necessary.

Note:- 1 All rates are inclusive of all taxes, duties & all government charges. No extra payment will be made in this regards.

Note:- 2 Rate quoted shall not be unjustifiable. Such tender shall submit rate justification to the competent authority.

Note :-3 Dismantled item Amount will be deducted from bill as per R&B SOR on quoted item rates.

Assistant Engineer (Ele.)

Dy. Executive Eng. (Ele.) Executive Eng. (Ele.)

PIU, Navsari. PIU, Surat.