OW(P) Upgradation of Toilet block at Lower fort, Chandragiri, Chittoor dt, A.P.

Amount

Removal and disposal of flooring Tiles and Dado Tiles in the existing toilet and Foot Path tiles in front of existing Toilet (Gents and Ladies) of Lower Fort Chandragiri including cost of all materials, labour charges and un-loading charges etc. complete item of work as directed by the Site in-charge.

Removal and disposal of damaged urinals, EWC, IWC and wash basins, Exhaust Fan, Urinal divider, doors, ventilators etc. in the toilet block including cost of all materials, labour charges, loading and un-loading charges etc. complete item of work as directed by the Site in-charge

Removal of the dead cement plaster over the walls and sealing roof and the same throwing away the wastage away from the monument to a distance of 1.00 kms including labour charges etc., complete item of work as directed by the Site in-charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead etc., complete item of work as directed by the site in charge

Providing water supply line in the concealed manner to the distribution taps and water closets and wash basins etc. including grooving, as per annexure-I of materials and labour charges inserting uPVC pipes and fixing of taps etc. and making provision for water supply to all above units and includes taxes like GST, and other applicable charges if any etc. complete item of work as directed by the Site in-charge(Please refer Annexure-A)

Repair/replacement of damaged electrification system in the toilet block as per annexure-II of materials, labour charges and includes taxes like GST, and other applicable charges if any etc. complete item of work as directed by the site in-charge (Please refer Annexure-B)

Cost, supply and fixing of Sanitary & Plumbing items including cost, conveyance of all materials, labour charges, laying and fixing in position charges etc and includes taxes like GST, as per annexure-III of materials, labour charges and other applicable charges if any etc. complete item of work as directed by the site in-charge(Please refer Annexure-C)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level (1:3:6) (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) inclusive of all materials & labour involved except scaffolding, also includes GST other applicable taxes if any etc. complete item of work as directed by Site in-charge.

Providing 15 mm plastering in C.M.(1:4) for super structure and Septic tank and soak pit including cost, conveyance of all materials, labour charges, curing, seignorage, loading, un loading and stocking at site, GST Taxes etc complete item of work as directed by the Site in-charge.

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel crews, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction including cost, conveyance of all materials, extended section profile size 42X50 mm, cutting in to required sizes, dressing charges, finishing etc., labour charges, fixing in position with hold fast lugs or with dash fasteners of required dia& length, includes taxes like GST, and other applicable charges if any etc. complete item of work as directed site in-charge.

25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. Complete item of work as directed by Site in-charge.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar (1:4) (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete item of work as directed by site in-charge

Providing and fixing 12 mm thick dado/skirting tiles acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457.11.21.2 In dado/skirting on 12 mm thick mortar (1:4) (1 acid proof cement : 4 coarse sand) etc., complete item of work as directed site in-charge.

Laying of Chequerred precast cement concrete tiles light shade 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar (1:4) etc., complete item of work as directed site in-charge

Painting to the wall surfaces 2 coats Finishing walls with textured exterior paint of required shade : 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm etc., including providing putty to the crevices/cracks etc. wherever necessary removal /cleaning of the existing surfaces using the iron brushes, cost and conveyance and supply of all materials and labour charges etc. complete including cost, conveyance of all materials, labour charges, finishing etc., and also includes GST, and other applicable taxes if any etc. complete item of work as directed by site in-charge.

Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivitywith 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tilesetc. Complete item of work as directed by site in-charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and thebase support for tank etc., complete item of work as directed by site in-charge

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes,M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose etc., complete item of work as directed by site in-charge.

Earth work in excavation by mechanical means(Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Site in-charge.

Providing and construction of brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming IS :2222 in super structure in C.M.(1:4) Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar (1:4) (1 cement : 4 coarse sand) as directed by site in-charge.

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of 12 mm dia @150 C/C as long side and 10 mm dia @150 C/C as Short side of span approved make from factory/workshop to construction site including placing in position and binding all complete upto plinth level and confining to Thermo-Mechanically Treated bars of grade Fe-500D or more and as directed by site in-charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement. All work up to plinth level and (1:1.5:3) (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). Etc., complete item of work as directed by site in-charge.

Providing Hire charges for centering, shuttering, proping, staging including material and labour charges for centering charges , for casting rcc slab and beam Including GST etc., complete item of work as directed by site in-charge

Design, Fabrication, supply, installation and commissioning of indoor type pillar box with Income 400A MCCB &125 A – 4 Nos MCCBs outgoings of size 1500mm(W) x 1200mm(H) x 400 mm (D) and made with 14 SWG CRCA sheet steel cleaning with 7 tank process and painting with powder coating. The box shall be made in compartment wise chambers for incomer, busbar, outgoings cable i/c chambers etc., and the individual chamber doors shall provide rubber beeding, door knobs etc., and the front door with double leaf arrangement with hinges and locking arrangement. Suitable heat Dissipation / Air/ Ventilation ducts with inside wire mesh shall be provide to the panel. The box base shall be mounted on 50 x 50 x 6 mm MS angle with stand legs at 4 corners at a length of 600 mm each of 50 x 50 x 6 mm MS angle with necessary welding and the angles shall be painted with two coats of enamel black paint over one coat of red – oxide. The pillar box legs should be fixed in ground of size 300mm depth by using 20 mm HBG metal in 1:3:6 ratio. The following switch gears etc., should be supply and fix firmly in the box and suitable holes to be made at bottom sheet of the panel for incoming / outgoing cable and install the panel at site as directed by site in charge.

Supply and transportation of following XLPE insulated, 1100 V grade armoured alluminium cable as per specification confirming to IS : 7098 (Part– 1)/1554-1 Makes : Torent / Universal / Unicab / Havells/ KEI/ Gloster/ Polycab /RR Kabel (Please refer Annexure-D)

Laying of UG cables size from 25 Sq. mm to 150 sq. mm with sand cushion covering the cable with bricks and back filling of Trench including cost and conveyance of material and labour charges etc., complete as directed by Engineer in-charge of work

Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Allumiunium lugs duly crimped with crimping tool, PVC tape etc. for following size of Armoured PVC insulated & PVC sheathed / XLPE aluminium conductor cable of 1100 volt grade as required of size makes : Dowels / Comet / SMIof size 3.50 core X120 Sqmm etc., complete item of work as directed by site in-charge.

Supply of protection suitable for TP / SP out goings and for 1 No 4 pole incomer etc complete as per IS 8623; IS 13032; IEC 61439 – 3. Makes : Legrand (Ekinox 3) / Schneider – Acti 9/ Hager – Novello +/ Seimens/ Havells STADx/ L&T - New range/ Indo Asian- Opti Pro/ HPL(Techno) 4 way VTPN DB with IP 43etc., complete item of work as directed by site in-charge.

Supply of Isolator. Makes : Legrand – DX 3/Schneider– Acti 9/ Hager–Novello +/ Seimens /Havells STADx/L&T– New range / Indo Asian – Opti Pro / HPL (Techno)100 a FP etc., complete item of work as directed by site in-charge.

Supply of 10KA C/D Curve ISI Mark. Makes: Legrand – DX 3/Schneider – Acti 9/ Hager – h3+/ Seimens 5SX4/ Havells STADx/ L&T– AU / Indo Asian – Opti Pro / HPL(Techno)40-63A DP MCB etc., complete item of work as directed by site in-charge.

Supply and fixing of ISI mark 25 mm outer dia heavy grade (2.10 mm thickness) with IS : 9537 part – 3 P.V.C. pipe for concealed wiring in new/ existing brick building, walls, columns, beams duly cutting them to the required depth wherever necessary and fixing the pipes and specials with nails and plastering neatly with cement mortar and colour washing to match the finished surface and masonry work for light, fan and separate plug point including all labour charges etc., complete. Makes: Sudhakar/ Finolex/ Polycab/ Kumar/ AKG/ Indian–Tubes/GM/Anchor/Nandi/Polyline/Gold Medal etc., complete item of work as directed by site in-charge.

Supply and run of 3 wire of 84/0.3 mm (6.0 Sq. mm) PVC insulated flexible FRLS copper cable as per IS : 694 / 1990 specification in the existing PVC pipe / MS pipe/PVC Trunking for mains including all labour charges etc., complete Grade–A; Makes: Finolex / RR cable/ Havells/ Polycab/ L&T/ KEI etc., complete item of work as directed by site in-charge.

Supply and fixing of suitable outdoor type feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F of Legrand / Schnieder / L&T make 40-63A FP MCB, 6 Nos SP MCB’s din chanel, bus bars, 6 Sqmm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete item of work as directed by site in-charge.

Supply of 3 core flat copper cable of ISI for submerisible mortar confirming to IS: 694:1990. Makes: Finolex / RR cable / Havells /Polycab /KEI /Gloster /Goldmedal /GM etc., complete item of work as directed by site in-charge.