WBPWD/AE/NKHESD/NIQ- 69/Q of 24-25.

Amount

Supplying and fixing double door 8way Vertical TPN MCB Distribution board with IP-42/43 protection, on wall by L Clamp & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.(as per Make: Legrand/L&K /ABB/Siemens) INCOMING- Supplying and fixing 415 V, 160A Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in DBs and necessary connection-1No. OUTGOING- Supplying and fixing 240V 63A TP MCB of Breaking capacity 10kA & C characteristics on 1din rail of existing DBs and necessary connection-8 nos.(Make: Legrand/ ABB/ Siemens/ L&K)

Supplying and fixing double door 415V, 8 way Horizontal TPN MCBDB (Legrand)comprising with of 1no. 63A FP Isolator and 24 nos.,(6- 32)A SP MCB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

Supplying and Delivery of 1.1 KV grade armoured Alminium XLPE cable (Make: Gloster/Havells/RR/Polycab) 4 core 16 sqmm

4 core 95 sqmm

Laying of 95 SQMM cable on existing Cable Tray and binding with suitable size GI wire.

Laying of 16 SQMM cable on existing Cable Tray and binding with suitable size GI wire.

Laying of cable of 4 Core 95 sq.mm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Laying of cable of 4 Core 16 sq.mm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector,6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.With 25x25x3mm angle iron support of size 200x50x1.25mm (18SWG)

Supply and fixing compression type glandcomplete with brass gland brass ring and rubber ring for dust and moisture proof entry of XLPE/PVC armoured cable. 4 core 95 sqmm

4 core 16 sqmm

Finishing the end of following XLPE/PVC armoured cables bycrimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials 4 core 95 sqmm

4 core 16 sqmm

Distn. Wiring in 1.1 Kv gr. Single core stranded ‘FR’ PVC insulated & unsheathed cu. wire (Havells/Polycab/Gloster) in 32/40 mm size PVC rigid conduit ‘FR (precession) incl. necy. Fitting as reqd. 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) ECC

4 x 35 sqmm

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes 10 sqmm

Supplying and fixing 415V, TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 125 A (Make- L & K/ABB/Siemens)

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting with MCCB Enclosure on wall(Make- L &K / ABB/ Siemens)

Supplying and fixing 415 V MCB of Breaking capacity 10kA & C characteristics on Dinrail of PVC Loopbox(Make- Syntex) of Size 8 inch x 10 inch incl.Supply & Fixing of Loopbox on wall and painting,connection & provision for earthing attachment 63 A FPMCB

Supply & fixing of Double 18/20W LED luminaire (Make :Philips, cat.no. TMC 501 P 2XT - LED 22W P3241) complete with all accessories incl. s&f 18W lamp (Make:Philips, cat.no. MAS LEDtube Polycarbonate 1200mm 18W865 T8 I) suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts and making connection as to GS

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA Medium GI Pipe

Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

RASH ELECTRICAL WORKS (BID ID -5926971)

KAMALA ELECTRICE WORKS (BID ID -5918864)