CONSTRUCTION OF BRICK MASONARY PROTECTION WALL AT AGRICULTURE POLYTECHNIC FOR KVK DEESA

NAME OF WORK :- CONSTRUCTION OF BRICK MASONARY PROTECTION WALL AT AGRICULTURE

POLYTECHNIC FOR KVK DEESA.

Sr. No. Description of Item Qty. Rate Per Amount

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

1 disposing off the excavated stuff upto 50 Meter 130.00 115.92 CMT

lead.(A) Loose or soft soil As per instructions and

….ETC drawing or as directed by engineer in charge.

Providing and laying cement concrete 1:4:8 (1- Cement

: 4- Coarse sand : 8- hand broken stone aggregates

40mm normal size) and curing complete excluding cost

of formwork in (A) Foundation and Plinth (upto

ton)...ETC drawing or as directed by engineer in charge.

Uncoursed Rubble Masonry with hard stone of

approved quality in foundations and plinth in Cement

3 Mortar 1:5 (1- cement : 5-coarse sand including 76.00 2480.92 CMT

levelling up etc. complete….ETC drawing or as directed

by engineer in charge.

Providing and laying ordinary cement concrete 1:1.5:3

(1- Cement 1.5- coarse sand : 3- graded stone

aggregates 20 mm nominal size) for R.C.C Coping

4 including finishing smooth with,curing etc. complete 18.00 4756.24 CMT

including the cost of formwork but excluding the cost

of reinforcement..etc EIC

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm. in

in superstructure above floor two level in Cement

mortar 1:5 ( 1-Cement : 5-coarse sand ) Conventional

….ETC drawing or as directed by engineer in charge.

Providing 15mm thick cement plaster in single coat on

Rough (Similar)side of single or half brick walls/RCC for

plastering upto floor two level and finished even and

smooth in (i) Cement mortar 1:3 (1-cement:3-

sand)….ETC drawing or as directed by engineer in

White washing with lime on wall surface (two coats) to

give an even shade including thoroughly booming the

7 surface to remove all dirt, dust; mortar drops and other 1233.00 20.00 SMT

foreign matter.….ETC drawing or as directed by

engineer in charge.

Sr. No. Description of Item Qty. Rate Per Amount

Providing TMT Bar FE 500/500D reinforcement for

R.C.C. work including bending, binding and placing in

8 position complete upto floor two level (upto 10 ton) 2700.00 75.46 KG

….ETC drawing or as directed by engineer in charge.

Providing and fixing 1.20 Metre highfencing with

Metre long M.S. Angle posts 40mm x 40 mm x6 mm

and oil painting 3 coats fixed at 3.0 Mt,C/c. with five

Horizontan lines of galvanised steel barbed wire

9 weighting 9.38 Kg. per 100 Metre, strained and fixed to 120.00 360.00 RMT

posts with G.I,staples including fixing the postsin with

0.15 M x 0.15 M x 0.15 M. block in C.C1:2:4 ….ETC

drawing or as directed by engineer in charge.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

10 exceeding 20 cm. in depth consolidating each 37.00 129.10 CMT

disposited layer by ramming and watering. ….ETC

drawing or as directed by engineer in charge.

I we am/are agree to carried out and complete the above

mentioned work at…………………….% (in words………………………………..………………….Percentage)

below/above rates mentioned schedule- B

Contractor Signature Executive Engineer