SPL REPAIR TO BLDG NO 3 2 MES 01 X OR MD ACCN AND BLDG NO P 44 3 TO 44 4 02 X OR MD ACCN AT EAST COURT AREA AT NAINITAL UNDER GE RANIKHET

Amount

BOQ/Sch 'A' B/R portion Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed.

M&L for 25mm 2nd class hardwood Boarding, supplied & fixed with nails in any situation (except flooring and skirting)

Fixing only second class hardwood boarding of any thickness complete all as specified and directed . ( Note :- Old boarding shall be obtaind from item No - 02 above)

M&L for second class hardwood (wrought) in scantling for woodn truss and boarding complete as specified and directed

Fixing only second class hardwood (wrought) in scantling for woodn truss and boarding complete as specified and directed ( Note :- Timber shall be obtaind from item No -03 above)

S&F prepainted aluminium zinc steel sheet (galvalume base) or thinknee 0.50mm having tensile strength of 550 MPA , in colour and profile as apporved by GE and to be facotry moulded as in roof covering /cladding and fixed with hot dipped galvanished with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified

S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed.

Dismantling floor, hearth , wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises

M&L for 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course complete where required all as specified and as directed .

M&L Virified tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and hite or coloured cement to match in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match as in floor etc , all as specified.

-ditto- all as per item ser No 12 above here-in-before but in skirting/dado or verticle surfaces with back coat of screed bed or bedding layer of 10 mm thick 1:4 and pointed in white or coloured cement to match complete all as specified.

M&L Joint free Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified.

M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 350 x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 and pointed in white or coloured cement to match complete all as specified..

Demolition of brick work/stone/boulder masonry, built in cement mortar incliding all quoins arches pillars, etc, but excluding ashlar facing , dressed stne work and precast concrete articles.

Material & Labour for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete.

M&L for RCC 1:2:4 type B-1, Slab supported on walls,beams and columns in floors,roof, landing, balconies,in type B1(20mm graded aggregate).

Formwork to soffits of suspended slabs such as roof slab, floor slabs landings and sgh finished surfaces of concrete flat.

M & L for mild steel TMT bars ,10mm dia and over , cut to length , bent to shspe required incl cranking , bending spirally for hooping for coloumns , hooking ends andbionding with (annealed) not less than 0.90 mm dia all a specified and directed

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over cement screed bed 15mm thick 1:4, complete all as specified and directed by Engineer in charge.

Providing edge moulding to 20mm thick to granite stone any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets but without frame work.

Supply & fixing of powder coated GI snap grid frame work for false ceiling comprising of the following sections for making partitions of 605x605 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 2mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 37mmx24mmx0.3 mm thick , cross tee shall be 28mmx24mmx0.3mm thick and wall angle shall be 24mmx24mmx0.3 mm thick including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete all as specified and directed.

Supply & fixing 4mm thick non asbestos E-board classic cememt building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed.

Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete..

Supply and Fixed Pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges ,lock stike plate etc, size 125 X 60 mm complete as specified.

Supply and Fixed Pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges ,lock stike plate etc, size 105 X 60 mm complete as specified.

M&L providing cement concrete (1:3:6) type C1 for filling in pressed steel frames and other similar items etc complete.

S&F 35mm thick second class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge. Glass or wire cloth, etc. in panels or sash squares shall be measured separately

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin VC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

S&F 150 mm long aluminium handles cast type anodised.

S&F in repair 150 mm floor door stopper of aluminium alloy body and tonuge ,anodised, with hard drawn steel spring fixed in floor.

Supply & fixing butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed.

S&F 300 mm ordinary rat rail rod pattern springs,including rollerand roller plate mild steel fixed with screwes wooden frame and welded to iron frame.

S&F 20mm dia Harrison rails, mild steel chromium plated with fixing bracket, stops, side fancy, roller etc complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete.

S&F three track aluminium powder coated sliding window with three sliding shutter, the size of outer frame three track 100 x 37 x 1.50mm (using two track for glazed window shutter and one track for wire gauged), the section shutter size 37 x 18 x 1.2mm) and glazing with 5 mm thick transparency glass of poly carbone including all around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed on aluminium flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers sliding rollers of nylon with including all necessary fittings complete all as specified and directed.

Taking up or down GI Water Tubing 15mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and as directed.

-ditto- all as per Item No. 45 here–in–before, but for 20mm dia (Bore).

-ditto- all as per Item No. 45 here–in–before, but for 25mm dia (Bore).

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

-ditto- all as per Item No. 48 here–in–before, but for 20mm dia (Bore).

-ditto- all as per Item No. 48 here–in–before, but for 25mm dia (Bore).

S&F in repair 15mm dia bib taps CP Brass with Capstanhead, screwed down, screwed for iron pipe of bore 15mm complete.

S&F in repair Brass CP Wall/Basin/Kitchen sink mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified .

S&F in repair Stop valves,15mm fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repair Angle Cock,15mm fancy type (2 in 1 type where required), chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair Brass chromium plated shower rose 125mm size with shower arm, including fixing to steel pipe or union complete all as specified and directed.

Supply& Fixing Soap Dish CP Brass complete all as specified & directed. Make : Prayag or equivalent as approved by Engr-in-Charge

S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and as directed

Supply & Fixing Corner Glass Shelf 300mm (with ABS Brackets) 300 x 600mm complete all as specified & directed.

Supply& Fixing in repair tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges all as specified.

S & F in repairs vitreous China squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests squatt pattern closet also includes 'P' or 'S' trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor.

Supply & fixing PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

Supply & fix in repair Health faucet Brass chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified as approved by the GE. Make- Jaquar or equivalent

S&F in repair wash hand basin of vitreous china white flat back size 450mm x 300mm, PVC waste pipe 32mm dia, waste coupling brass chromium plated and including cutting complete all as specified and directed.

S & F in repair Stainless Steel grating 100mm dia complete all as specified.

S&F in repair PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

S&F in repair PVC Connections 600mm long complete all as specified.

Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc including taking out/removal of the all the tree routes from the brick surface/concrete surface complete all as directed. Note : Rate should be deemed included in the said items in the item rate.

Material and labour for 15mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth (without using extra cement) etc. incl finishing even and fair complete all as specified NOTE -WPC shall be measured and paid separetely.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete.

Supply only WPC complete all as specified and directed.

M&L for applying two coats of synthetic eneamel painting over a coat of pink primer on new wooden surfaces exc 10 cm width or girth including preparation of surfaces complete.

M&L for Preparing newly plastered surfaces and applying two coat of oil bound distemper over a coat of primer to wall to complete all as specified and as directed,

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over any surfaces. Makes :- Nerolac -Excel, Asian - Apex, Berger - Weather coat antidust, Dulux - Weather shield.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

S&F Mild steel sheet eaves gutters thickness of sheet 1 mm and dia 100mm, galvanised class 3, half round with rounded edge including brackets, heads, shoes etc complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level).

M&L for 75mm Cement concrete Type C-2 1:3:6 (40mm graded aggregate) for plinth protection complete all as specified and directed by Engineer -in-Charge.

S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Dismantling water tanks of capacity exc 500 but n.exc 1000ltrs complete.

Supply & Fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Supply and Fixing, Stainless steel wall mounted plate rack of size 780mm x760mm x 240mm, thickness of sheet not less than 1.0 mm and weight not less than 7.50 kg of approved design/pattern (as approved by Engr-in-charge) with provision for keeping plate and other crockery, fixed with screw and rawl plugs etc on wall..

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Material & Labour for factory made precast (Rubber moulded) concrete designer chequered tiles any colour, shape and size not less than 20 cm x 20 cm x 25mm thick (compressive strength not less than 250 Kg/Sqm), set, jointed and pointed with grey cement and pigment over and including 20mm thick CM 1:6 screed bed or bedding layer complete all as specified and directed.

M & L for PCC 1:2:4 type - B0 (using 12.5 mm graded crushed stone aggregate), as in coping, kneelers, perapets, apex stones and similar works incl necessary formwork complete all as specified directed by Engr-in Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed

M&L for Framed work as in doors or gates of Fe-290 (Gde E 165) angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, tc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

M & L for walling of random rubble stone masonry uncoursed well bounded badded and solidly hearted built in CM 1:6 brought upto course complete all as specified and directed by Engineer-in-Charge.

Ditto all as per item no 92 above but except stone.

Extra over stone walling for hammer dressing to face stone and dressing face beds and joints as specified of random rubble walling uncoursed or brought upto courses surface n exc 40 mm of Granite or Trap stone.

M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 complete.

M&L for raised pointing in CM 1:4 including Raking out joints/poiting to random rubble or polygonal rubble uncoursed or brought up to courses work built in cement mortar complete all as specified.

M&L for PCC 1:3:6 type C-2 (40 mm graded aggregate) as in surface channels and drains including form work.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc., and area n.exc. 10 Sq.m on plan and getting out in any type of soil (Hard/soft).

Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 150mm, set in cement mortar complete.

M&L for cement concete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes of 160mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L 150 mm Bore of DWPE pipe (SN8) (ID) pipe with coupler, ring and bends as required , laid in trenches and jointed complete including testing complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concret 1:2:4 type B-1 smooth finished, and reforming benching as required, for internal dia of pipe 160mm complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed ncluding necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as directed.

S&Fixing in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed ncluding necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as directed.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick.

Removing the excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4). Note:- reinforcement will be measured and paid seperately.

M & L brick work with sub class 'B' bricks straight or curved on plan exc 6M mean radius built in CM (1:4) as in manhole, septic tank, filter bed, wall and out let drain etc.

M&L for APP based polymeric membrane minimum weighing 3.60 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Wt not less than 150 gms / sqm) laid on bituminous surfaces by forced application over entire roof area, sunken portion with side lap not less 100mm and end lap not less than 150mm incl apply a tack coat of industrial bitumen complete all specified.

M&L for applying a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over a coat of bitumen primer @ 0.30 Kg/ Sqm including cleaning surfaces etc complete all as specified

S&F 30mm thick Flush shutters with/without peepholes, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face are covered with decorative face veneer with lipping/frame to match and

M&L for rendering 5mm thick on fair faces of ceiling in CM 1:3 finished even and fair without using extra cement complete.

M&L for 100 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in floor, finishing cement concrete surface even and smooth without using extra cement all as specified and as directed.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 50mm thick sand cusioning layer under interlocking paver block complete all as specified and directed.

M&L for 60 mm thick machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigments complete all as specified and directed.

Dismantling posts or struts embedded in Concrete, brick work, masonry, etc. (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground all as specified and directed.

Dismantling of galvanised barbed wire of any description and in any postion complete all as specified and directed.

Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, in any type of soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

S & F MS posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc ; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or rivetting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engineer-In-Charge.

Mild steel screw bolts, 5 to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified.

M&L mild steel TMT bars 10mm dia and over , as in stiffner to hold the chain link fencing fixed with angle iron post, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for preparation of new untreated surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (approved shade) over a coat of red oxide, zinc chrome on steel surfaces complete all as specified and directed by Engineer-in-Charge.

Supply only Chain link MS galvanised fencing of mesh size (nominal pitch of wire) of 50mm and 3.15mm dia.

Fixing only Chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed by engineer-In-charge.

Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for Preparing newly plastered surfaces and applying two coat of oil bound distemper over a coat of primer to ceiling to complete all as specified and as directed,

E/M Portion:Taking down carefully Aluminium/copper wiring of any size (for light, fan, socket or power etc complete) ( fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc to be measured and paid separately) and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed.

S & F point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed, are as follows :- (a) One light/one fan/one bell point controlled by one, one way switch.

All as per item No 130 but one light point controlled by two Nos of two way switch.

All as per item No 130 but One socket outlet 5 pin 5 Amp controlled by one, one way switch on same board.

All as per item No 130 but One socket outlet 5 pin 5 Amp controlled by one, one way switch on independent board.

All as per item No.130 hereinbefore but wiring with using cable 2.50 sqmm size copper wire (FRLS) and earth wire of PVC insulated (Green colour) 2.50 Sqmm size copper wire for one 6 pin socket outlet, 16 Amperes on independent board.

S&F switch piano flush type single pole, one way 5 Amp complete all as specified and directed

S&F switch piano flush type single pole, Two way 6 Amp complete all as specified and directed

S&F socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed

S&F switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

S&F socket out let 2 in 1, 3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

S&F modular switch 6 Amp one way switch, 1 module complete all as specified and directed.

S&F modular socket 6 Amp 2/3 Pin combined socket shuttered, 2 module complete all as specified and directed.

S&F modular switch 1 way 16 Amp, 1 module complete all as specified and directed.

S&F modular socket 6A/ 16Amp, 2/3 pin combined, 2 module complete all as specified and directed.

S&F modular white cover plate with frame 2 Module complete all as specified and directed.

S&F modular white cover plate with frame 3 Module complete all as specified and directed.

S&F modular white cover plate with frame 4 Module complete all as specified and directed.

S&F modular white cover plate with frame 6 Module complete all as specified and directed.

S&F modular white cover plate with frame 8 Module complete all as specified and directed.

S&F anodised rust proof 18 SWG MS modular metal flush box,1/2 Module complete all as specified and directed.

S&F anodised rust proof 18 SWG MS modular metal flush box, 3 Module complete all as specified and directed.

S&F anodised rust proof 18 SWG MS modular metal flush box, 4 Module complete all as specified and directed.

S&F anodised rust proof 18 SWG MS modular metal flush box, 6 Module complete all as specified and directed.

S&F anodised rust proof 18 SWG MS modular metal flush box, 8 Module complete all as specified and directed.

S&F ceiling rose, PVC/ Poly carbonate,isolated body three terminal complete all as specified and directed.

S & F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply and fix High quility LED T5 integrated batten tube light 20 Watt with aluminium extrusion with frosted PMMA/PC diffuser, internaly pre wired of 1.5 sqmm twin twisted flexible cable all as specified & directed. NOTE: The contractor must submit 5 years warranty for LED fitiings.

Taking down unservicable MCB and S&F MCB SP, 240 volts,AC C curve, 10 KA 6 to 32 Amps .

Taking down unservicable MCB and S&F MCB SPN , 240 volts,AC B curve, 10 KA 40 Amps.

Taking down unservicable MCB and S&F MCB DP , 240 volts,AC C curve, 10 KA 40 Amps.

Taking down unservicable MCB and S&F MCB TPN , 815 volts, AC C curve, 10 KA 100 Amps.

S&F sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps including one 15 Amp switch on existing board with wiring for switching geyser on/off complete all as specified and directed.

Supply & Fixing of non metallic PVC conduit 25 mm exclusive of boxes but includinf of all tees,bends,elbows, reducers,bell mouth tube ends and fixing accessories such as couplers,lock nuts,saddles, pipe hooks etc. concealed in wall ceiling floor etc for television/DTH/telephone/Data cable complete all as specified and directed.

S& F socket outlet for TV/Video/audio device modular type with inner and outer modular plate type, specially built for wall/high mounted TV and inc pressed steel/metal flush box concealed complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete. all as specified and directed .NOTE : The contractor must submit 5 years warranty for LED fittings

Taking down unservicable DB and S&F sheet metal enclusure for DBs(double door type) single pole and neutral 8 way including blanking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply and fixing metal enclusure for DBs(Double door type) triple pole and neutral 4 way including blacking platge as required with 200 Amps rated bus bar, 415 volts fixed complete all as specified and directed.

S & F LED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser including LED light driver holder, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fittings

Taking out old U/S Sub main wiring for replacement including S&F sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 6 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mm dia with all accessories and one continuous run of 6.0 Sqmm copper conductor PVC complete all as specified and directed (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

S & F call bell ding dong AC, 230V single pole fixed over with and including sunk spressed steel box of size 175mmx100mm with 3mm thick plastic laminated backalite shut cover fixed with brass screw complete all as specified and directed,

S&F bell push piano flush type single pole, one way 5 Amp complete all as specified and directed.

S&F bell push Modular type, one way 6 Amp complete all as specified and directed.

S& F LED Bulb of 9 watt as specified .NOTE: The contractor must submit 5 years warranty for LED fittings

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fittings

Supply and fixing Geyser 25 Ltr Capacity ,CRCA Metallic body ,Stainless Steel (SS) inner tank, BEE five star rating, heating element upto 2 KW, ISI mark, with all accessories such as safety valve, thermostate, NRV, connection piece etc & making 04 Nos hole and grouting of suitable size of nuts and bolts and making good as per existing surface

Taking down storage type water heater (geyser) of any type /make up to 50 Ltr capacity after disconnecting electric / water connections and refixing the same after carrying out necessary repairs including reconnecting the electric / water connections and testing complete all as specified and diected.

S & F Exhaust fan plastic body heavy duty ISI mark, 250 mm size with louvers including all connecting accessories and cutting opening on wall and making good as per existing surface complete all as specified and directed

S&F Exhaust fan metallic bady ISI mark, 300 mm size with louvers including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core will be connected through aluminium lugs as per site requirement.

Supply, laying and testing cable XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core.

M&L for sand cushioning in trenches spreading and consolidation 8cm thick before laying the cable & 15 cm of sand after laying the cable complete all as specified

M&L for laying of bricks well burnt sub class ‘B’ (old pattern) laid flat for cable protection width equal to the lengrth of brick complete all as specified .

M & L galvanised steel water tubing 'light grade' 40 mm bore with all fittings laid under the roads, drains, culverts and fixed on poles etc complete all as specified and directed .

Ramsons (BID ID -3353914)

SS Construction Co (BID ID -3354817)

AJA BUILDERS (BID ID -3355318)

KRISHNA SAI ENTERPRISES (BID ID -3355058)