Upgradation of CALA Office/Digitization Hall at Mini Secretariat Shopian.

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Executive Engineer R&B Division Shopian

Name of Work:- Upgradation of CALA Office/Digitization Hall at Mini Secretariat Shopian.

Contract No: 63/6691-99/RnB/ SPN /e-Tendering/2025-26 Dated:- 04-12-2025 Adv cos(INR) :- 11.701 (Base cost= 9.916 +GST= 1.785 ) In lacs Accord No:-DCS/Actt/2025-26/40-46 Dated:-22-11-2025. Technical Sanction:- 83/TS/RnB/Spn of 2025-26 Dated:- 04-12-2025. .

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Discription. Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Rs. P TOTAL AMOUNT TOTAL AMOUNT In Words

1 Brick work with common burnt clay bricks of class designation 7.5 in Super structure above plinth level upto floor V level in Cement mortar 1:6 ( 1 cement : 6 fine sand) including loading unloading etc including all carriages complete 11.45 Cum 8050.847 Excess(+) Full Conversion INR

2 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length of Imported wood including all carriages complete. 0.25 Cum 46610.169 Excess(+) Full Conversion INR

3 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 16 Nos 181.78 Excess(+) Full Conversion INR

4 Providing and fixing 35 mm panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. imported wood: including all carriages. 8.58 Sqm 2203.39 Excess(+) Full Conversion INR

5 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Imported Wood including all carriages. 2.51 Sqm 2033.898 Excess(+) Full Conversion INR

6 Providing and fixing of 35 mm thick wire gauge shutters using galvanized MS wire gauge of average width for aperture 1.4mm in both directions with wire of dia 0.63mm for doors, windows clestory windows with IS marked MS pressed butt hings bright finished of required size with necessary screws as per the directions of engineer in-Charge (imported wood) including all carriages. 8.58 Sqm 2372.881 Excess(+) Full Conversion INR

7 Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes. 6.48 Sqm 938.237 Excess(+) Full Conversion INR

8 Modular door lock with dual locking system Inside & outside of approved make as directed by engineer in charge. 1 Nos 1694.915 Excess(+) Full Conversion INR

9 Providing and fixing 150 mm Modular tower bolts with nuts and screws etc of approved make as directed by engineer in charge. 20 Nos 101.695 Excess(+) Full Conversion INR

10 Providing and fixing ISI marked 85 mm x 42 mm oxidized M.S. pull bolt lock conforming to IS: 7534 with necessary screws, bolts, nut and washers etc. complete 9 Nos 93.22 Excess(+) Full Conversion INR

11 Providing and fixing 150 mm ISI marked ornamental handles with necessary screws etc. complete of approved make as directed by Engineer Incharge 2 Nos 254.237 Excess(+) Full Conversion INR

12 Providing and fixing 100 mm ISI marked ornamental handles with necessary screws etc. complete of approved make as directed by Engineer Incharge 18 Nos 211.864 Excess(+) Full Conversion INR

13 Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 21.48 Sqm 55.356 Excess(+) Full Conversion INR

14 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work 21.48 Sqm 115.585 Excess(+) Full Conversion INR

15 12mm cement plaster 1:6 (1 Cement:6 Fine Sand) including all carriages complete 88.56 Sqm 233.373 Excess(+) Full Conversion INR

16 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)including all carriages complete 14.52 Sqm 211.5 Excess(+) Full Conversion INR

17 Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete 56.27 Sqm 199.619 Excess(+) Full Conversion INR

18 Engagement of Carpenters 5 Nos 550.847 Excess(+) Full Conversion INR

19 Providing and fixing of imported wooden wall panelling of required thickness including the cost of cornices as required over 12 mm thick plyboard including cost of plyboard with all necessary fittings fixtures adhesives as per the directions of engineer incharge and all carriages complete 24.12 Sqm 1864.407 Excess(+) Full Conversion INR

20 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.( Internal work concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.)

20.01 PN-16 pipe , 25mm OD(SDR-7.4) 15 RM 404.237 Excess(+) Full Conversion INR

20.02 PN-16 pipe , 40mm OD(SDR-7.4) 9 RM 449.153 Excess(+) Full Conversion INR

21 Providing & Fixing PVC (Approved Make) pipe (Type-B) incl. cost of rubber washer and adhesive complete

21.01 100mm dia 30 RM 381.356 Excess(+) Full Conversion INR

21.02 75mm dia 30 RM 296.61 Excess(+) Full Conversion INR

22 Providing and fixing PVC (Approved Make) following fittings complete.

22.01 Door Tee 100mm size 2 Nos 148.305 Excess(+) Full Conversion INR

22.02 PVC collar 100mm 4 Nos 76.271 Excess(+) Full Conversion INR

22.03 PVC Reducer 100x75mm 4 Nos 113.559 Excess(+) Full Conversion INR

22.04 Floor Trap 75 mm size 4 Nos 182.203 Excess(+) Full Conversion INR

22.05 Plain Bend 100 mm size 4 Nos 127.119 Excess(+) Full Conversion INR

22.06 Plain Bend 75 mm size 4 Nos 84.746 Excess(+) Full Conversion INR

22.07 Door bend 100mm 4 Nos 127.119 Excess(+) Full Conversion INR

22.08 Door bend 75mm 4 Nos 97.458 Excess(+) Full Conversion INR

22.09 P-Trap 100mm 2 Nos 127.119 Excess(+) Full Conversion INR

22.1 Plain Tee 75mm 2 Nos 97.458 Excess(+) Full Conversion INR

22.11 Plain Tee 100mm 2 Nos 110.169 Excess(+) Full Conversion INR

23 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. 2 Nos 361.288 Excess(+) Full Conversion INR

24 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 4 Nos 512.712 Excess(+) Full Conversion INR

25 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 4 Nos 510.169 Excess(+) Full Conversion INR

26 Providing and fixing CP Brass wall mixer of quality & make as approved by Engineer in charge. 15 mm nominal dia 2 Nos 2542.373 Excess(+) Full Conversion INR

27 Providing and fixing health faucet with chain of approved make for European water closet complete in all respect of approved quality. 2 Nos 847.458 Excess(+) Full Conversion INR

28 Providing and fixing of CP Towel Rod 600mm Long of approved make including all accessories complete. 2 Nos 550.847 Excess(+) Full Conversion INR

29 Providing and fixing C.P. brass Soap Dish Holder of approved quality and made: 2 Nos 254.237 Excess(+) Full Conversion INR

30 Providing and fixing uplasticized PVC connection pipe with brass unions, 30 to 45 cm length, 15 mm nominal bore 8 Nos 94.466 Excess(+) Full Conversion INR

31 Providing and fixing of CP Grating of approved make including all accessories complete. 4 Nos 211.864 Excess(+) Full Conversion INR

32 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. 20 Nos 61.237 Excess(+) Full Conversion INR

33 Providing and fixing toilet paper holder: C.P. brass 2 Nos 886.441 Excess(+) Full Conversion INR

34 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:4:8 or leaner mix (i/c equivalent design mix) 5.02 Cum 933.288 Excess(+) Full Conversion INR

35 Providing and laying water proofing treatment on horizontal and vertical surfaces by applying Dr Fixit Pidifin 2K water proofing of 2 layers one x-axis direction and 2nd y-axis directions after preparation of surface, complete job: 34.04 Sqm 194.915 Excess(+) Full Conversion INR

36 Providing and laying stone soling duly hand packed in maintaning level and section including all carriages complete 2.23 Cum 762.712 Excess(+) Full Conversion INR

37 Providing and laying in position cement concrete 1:4:8 (1 Cement:4 Corase sand: 8 grade stone aggregate 40 mm nominal size crushed including curing but excluding the cost of centring and shuttering. All work upto plinth level including all carriages for an average lead of 15Kms complete 2.23 Cum 4830.508 Excess(+) Full Conversion INR

38 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm 11.16 Sqm 1223.076 Excess(+) Full Conversion INR

39 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 59.54 Sqm 1077.542 Excess(+) Full Conversion INR

40 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 3 Nos 4815.907 Excess(+) Full Conversion INR

41 Providing and fixing A Class imported wood flooring (3D Type) laminated of standard make tongued and grooves fixing on foam with proper resin material as per sample MF-84 including all fittings, fixtures, cornices and carriages complete job 18.91 Sqm 1355.932 Excess(+) Full Conversion INR

42 Repairing of Electric Gysers by way of cleaning and changing of other electric items complete job 6 Nos 423.729 Excess(+) Full Conversion INR

43 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge Powder coated aluminum (minimum thickness of powder coated 50 microns) 215.565 Kg 450.847 Excess(+) Full Conversion INR

44 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminum lever handles of approved quality with necessary screws etc. complete. 2 Nos 677.966 Excess(+) Full Conversion INR

45 Providing and fixing aluminum work for doors partitions of required size 1.5 mm thick, ACP Sheets 4.0 mm and glazing 5.0 mm including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, Handles, locking system all complete as per the directions of Engineer-in-Charge 1.08 Sqm 4322.034 Excess(+) Full Conversion INR

46 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. 1 Nos 211.864 Excess(+) Full Conversion INR

47 Providing and fixing of Exhaust Fan of ISI marked including all accessories and fixtures complete job 1 Nos 1101.695 Excess(+) Full Conversion INR

48 Providing and fixing of Towel rail C.P. brass 750 x20 mm together with a pair of each C.P. brass brackets to fit the size of towel rail of approved make including all accessories and fixtures complete job 1 Nos 832.864 Excess(+) Full Conversion INR

49 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Flexible pipe 32 mm Dia 1 Nos 112.263 Excess(+) Full Conversion INR

50 Providing nad fixing aluminum american handles ISI marked anodized (anodeic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc complete 150 mm 15 Nos 127.119 Excess(+) Full Conversion INR

51 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Kiln seasoned and chemically treated hollock wood including all carriages complete. 0.05 Cum 65185.288 Excess(+) Full Conversion INR

52 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :Of area of 3 sqm. and below 1 Nos 250.008 Excess(+) Full Conversion INR

53 Providing and fixing 35 mm panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned and chemically treated hollock wood including all carriages complete. 2.1 Sqm 2177.119 Excess(+) Full Conversion INR

54 Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete : 2 Nos 1427.263 Excess(+) Full Conversion INR

55 Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. 1 Nos 1816.602 Excess(+) Full Conversion INR

56 Providing and fixing superior type curtains fixing with rings of size 4'x 7' of design and pattern approved by Engineer Incharge 4 Nos 847.458 Excess(+) Full Conversion INR

57 Providing and fixing of 15 watt Concealed square lights of size 300 mm x 300mm of ISI standard make including all accessories and fixtures complete Job 9 Nos 1271.186 Excess(+) Full Conversion INR

59 Wiring for light/power plug points (15/16A heating points) with 2x4 sq mm FRLS PVC insulated flexible stranded copper conductor wires in recessed or surface medium class PVC conduit along with 1x4 sq. mm FRLS PVC insulated copper conductor single core cable for earthing, etc, as required. (Havells/ Polycab/ Anchor/ SSK) excluding the cost of conduit 148 Metre 188.136 Excess(+) Full Conversion INR

60 Supply, installation, testing and commissioning of 1.5 Ton, 3-Star Inverter type Split Air Conditioner (Hot & Cold), suitable for single phase 230V, 50Hz power supply, equipped with hermetically sealed rotary/inverter compressor using eco-friendly refrigerant R410A/R32, complete with indoor wall-mounted unit and outdoor condensing unit, wireless remote control, factory-charged refrigerant, and necessary mounting hardware. Includes 5m copper piping, cable, drain pipe, mounting brackets, drilling. pressure testing and commissioning. 6 Nos 52966.102 Excess(+) Full Conversion INR

61 Supply, installation, testing and commissioning of 4 kVA automatic relay-type Voltage Stabilizer suitable for 1.5 Ton Split AC, operating at 90-260V range, delivering stable output of 230V ±3%, with high/low voltage protection, time delay feature and wiring. 6 Nos 7203.39 Excess(+) Full Conversion INR

62 Supply, installation, testing and commissioning of 25A MCB Box Protected Socket with 25A plug top and child safety shutter inside closed box. 6 Nos 1567.797 Excess(+) Full Conversion INR

63 Supply and fixing of 25mm PVC Casing & Capping (FRLS type) with accessories such as saddles, couplers, tees, bends and junction boxes complete. 148 Metre 62.712 Excess(+) Full Conversion INR

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words