Various Diversion of SHRB / MDRB on Limbdi Branch Canal (Second Attempt)

BILL OF QUANTITIES

BILL OF QUANTITIES

1. The bill of Quantities shall be read in conjunction with the Instructions to Bidder,

Conditions of Contract, Technical Specifications and Drawings.

2. The quantities given in the Bill of Quantities are estimated and provisional and are

given to provide a common basis for bidding. The basis of payment will be the actual

quantities of work ordered and carried out, as measured by the Contractor and verified

by the Engineer and valued at the rates and prices tendered in the priced Bill of

Quantities, where applicable, and otherwise at such rates and prices as the Engineer

may fix within the terms of the Contract.

3. The rates and prices tendered in the priced Bill of Quantities shall, except in so far as it

is otherwise provided under the Contract, include all construction plant, layout,

supervision, materials, erection, maintenance, insurance, profit, taxes and duties,

together with all general risks, liabilities and obligations set out or implied in the

4. The rates and prices shall be quoted entirely in Indian Currency.

5. A rate or prices shall be entered against each item in the Bill Quantities, whether

quantities are stated or not. The cost of Items against which Contractor has failed to

enter a rate or price shall be deemed to be covered by other rates and prices entered in

the Bill of Quantities (in case of Item rate contract).

6. The whole cost of complying with the provisions of the Contract shall be included in

the items provided in the priced Bill of Quantities, and where no Items are provided

the cost shall be deemed to be distributed among the rates and prices entered for the

related items of Work.

7. General direction and descriptions of work and materials are not necessarily repeated

or summarized in the Bill of Quantities. References to the relevant sections of the

contract documentation shall be made before entering rates or prices against each item

in the Bill of Quantities.

8. The method of completed work of payment shall be in accordance with the

specification for canal work Road and Bridge works. For building works

specifications for building are to be followed.

9. Errors will be corrected by the Employer for any arithmetic error pursuant to Clause

29 of the Instructions to Bidder.

10. Rock is defined as all materials which, in the opinion of the Engineer, required

blasting, or the use of metal wedges and sledgehammers, or the use of compressed air

drilling for its removal, and which cannot be extracted by ripping with a tractor of at

least 150 kw with a single rear mounted heavy duty ripper.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr.)

Name of Division: Executive Engineer, S.B.C. Dn. No. 4/1, Limbdi.

Name of Work :- Various Diversion of SHRB / MDRB on Limbdi Branch Canal.

Description of Item Quantity Unit Rate Amount

Earthwork/Back filling with selected earth brought

from out side borrow area or from excavated useful

1 material incl. watering, ramming, Compaction with 2446.00 Cum 141.00

pnumatic temping and all lead and lift etc

Excavation in all sort of strata and formations incl.

depositing the unuseful excavated stuff as and

where directed incl sorting and stacking useful

2 materials as directed upto 30 mt lead etc. complete 602.00 Cum 83.00

incl. dewatering. (Depth 0 TO 3.0 mt ) (For all type

canal & foundation trenches of C.D. works )A) IN

OVERBURDEN INCL. HARD MURRUM.

Supplying and fixing reinforced concrete heavy

duty non pressure pipes with collars for culverts

including setting and joining the pipes in C.M. 1:2

watering and laying (To level of slops of I.S. 458 /

1971 Class NP4 of following internal diameter.

(viii) 1600 mm dia.

Type - A, "W" : Metal Beam Crash Barrier

(Providing and erecting a "W" metal beam crash

barrier comprising of 3 mm thick corrugated sheet

metal beam rail, 70 cm above road/ground level,

fixed on ISMC series channel vertical post, 150 x

75 x 5 mm spaced 2 m centre to centre, 1.8 m high,

1.1 m below ground/road level, all steel parts and

fitments to be galvanised by hot dip process, all

fittings to conform to IS:1367 and IS:1364, metal

beam rail to be fixed on the vertical post with a

spacer of channel section 150 x 75 x 5 mm,

mm long complete as per clause 811)

Supplying and fixing road sign board of M.S.

plates and angle iron including painting, lettering

5 etc. complete including fixing in C.C. 1:4:8 with 54.00 Each 3072.99

necessary excavation etc. complete as per I.R.C.

type design.(ii) Reflective type

Providing,cutting,bending,binding and fixing in

position as per drawing. TMT BAR , Fe-415

6 reinforcement for R.C.C. works and anchor bars 10.88 MT 66268.00

incl cost of black annealed 16 to 18 BWG M.S..

Wire etc.complete with all lead and lift.

Prov. and Laying in position Controlled cement

concrete using cement, sand and crushed aggregate

7 by mass and machine mix for R.C.C/CC work 1343.00 Cum 4303.00

including necessary formworks centering

scaffolding compaction by vibrator,curing as

directed with all lead & lift etc complete Excluding

the cost of reinforcement A) Concrete grade M-15

Prov. and Laying in position Controlled cement

concrete using cement, sand and crushed aggregate

by mass and machine mix for R.C.C/CC work

including necessary formworks centering

scaffolding compaction by vibrator,curing as

directed with all lead & lift etc complete.

Excluding the cost of reinforcement A) Concrete

grade M-25 and MSA-20mm

Providing, supplying, Lowering, and laying ISI

Standard R.C.C. NP-3 Class pipes in standard

lengths of following Diameter suitable for either

collar joints or rubber ring joints including all

taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading,

conveyance to Site, and jointing in proper position,

9 grade and alignment at all level as directed by 90.00 Rmt 3969.00

Engineer-in-charge including all labour, giving

hydraulic testing as per ISI code. (G) 900 mm dia.

NOTE:- One collar should be supplied with each

full length plain ended RCC pipe, cost included in

rates below. One rubber ring should be supplied

with each full length socketed pipe, cost included

in rates below.

Providing & laying dry rubble stone pucca pitching

with panel (of size not more than 10sqmt ) of stone

masonry 30cm thick wall in C.M. 1:5, without base

10 , inverted filter and header stone but with 10 cms 702.00 Sq.mt 831.00

thick murrum layer (for base ) incl hand packing

and trimming and dressing slopes etc. b) 30 cms

thick stone pitching with pointing in C.M. 1:2

Providing, laying, spreading and compacting layer

of Quarry Spall having CBR not less than 15%, as

11 subgrade for the designed pavement and 452.00 Cum 1319.32

conforming to Clause 305 of MoRT&H

Specifications.

Providing, laying, spreading and compacting

graded stone aggregate to Water Bound Macadam

(WBM) specification including premixing the

material with water at OMC in mechanical mix

12 plant carriage of mixed material by tripper to site, 366.00 Cum 1656.69

laying in uniform layers with paver in sub base /

base course on well prepared surface and

compacting with vibratory roller to achieve the

desired density.

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work at… ....................... %above/below percent(Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………%below Add………%Above

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item(with Quantity Unit Rate Amount

No brief specification and

reference to book of In In

specifications) figures Words

(A)Total Tendered Amount

(B)Rebate on above tendered amount (if any) % (in figure)

(C)NetTendered Amount(A-B) (in figure) ………………………………

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all P.C.C./R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as

per vernacular office letter no. 04 of 2024, Dt. 20/01/2024 of The Chief Engineer, Quality

Control (SSNNL) as stated in S.O.R. therefore in P.C.C./R.C.C. items where there is a change

as per Nominal mix the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate (i.e. 5448.53 Rs / MT for OPC) in all the