Annual Plan-SO417/25 Construction of Auto rikshaw stand at Municipal bus stand in ward 15 at Tirur municipality

Amount

Construction of Auto stand

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

OD174977/2024-2025:Providing and fixing pre coated galvanized iron profile sheets(size, shape, and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns. The sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in- charge. The sheet shall be fixed using self-drilling/ self-tapping screws of size (5.50x 55 mm)with EDPM seal, complete up to any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters, and trusses and including cutting to size and shape wherever required

13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

OD175854/2024-2025:Providing and fixing 150 mm wide, square cut PVC 4 kgf/cm2 rain water gutter pipe with iron brackets with 25x5 mm size flat, screws and washers etc., including making necessary connections with rain water pipes etc complete

50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall

OD175828/2024-2025:Supplying and fixing at the site, aluminium composite panels of alucobound, durabuild or equivalent make and approved colour certified for exterior applications, thickness 3mm, with 28 to 30 microns of PVDF coating conforming to ASTM standard on the top aluminium skin of 0.25mm and with a bottom aluminium skin of 0.25mm with service coating of polyeater paint, laminated onto a centre core of 2.5mm of single recycled low-density polythylene material. The panels shall be cut to sizes of the required grid dimensions in line with the site conditions. The panels shall be fixed on a prefabricated framework using 38mm*25mm*1mm thick Aluminium extruded sections of approved make ,joined horizontally and vertically using standard cleats and fastners. The gap of formed between the panels shall be seated with silicone sealant of dow coring grade 789. The rate inclusive of cost and conveyance of all materials, lead, lift and labour for erection, hire charges for scaffolding etc. complete

OD175853/2024-2025:Lettering in Acrylic letters for name Board work including labour, material and fittings charge etc . complete (Area to be measured including standard spacing between letters)

OD175851/2024-2025:Providing and fixing Granite of any colour and shade for Name boards, of the required size laid over the base of cement mortar 1:4 (1 cement: 4 coarse sand) including all charges etc. complete at all levels, including lettering &fixing charges etc complete

KRISHNADAS M (BID ID -2031348)

Bidder Name

k.SIDDHIQUE

KRISHNADAS M