8636 Repairs to toilet and sanitary fittings treatment ot sunken floors, waste water pipes in NSTL residential area under AGE I R and D Visakhapantma

Repairs to existing sunken floor to be done as given following courses :-Demolition out and removing sunken floor filling and depositing the same at a distance n exc 250m away from the outer edge of bldg complete all as directed by Engineer-in-Chage

M&L for applying two coats of epoxy resin coating polymer modified coating to a thickness of 1 mm incl preparation throuly without any traces of dirt or luitance as in sunken floors complete all as specified and as directed by Engineer-in-Charge. (Using NITOBOND Chemical First coat 1:2:3 (Nitobond 1 Ltrs : water 2 Ltrs : Cement 3 Kg) NITOBOND Chemical second coat 1:3 (Nitobond 1 Ltrs : Cement 3 Kg)

M&L 15 mm thick protective plastering in CM 1:4 (using and complete all as sp mixed WPC 150 ml per cement bag) specified and as directed by Engineer-in-Charge.

M&L PCC with 40 mm graded stone aggregate D2 1:4:8 as in sunken floors complete all as specified and as directed by Engr-in-Charge. (Liquid water proofing compound will be measured in separate item)

M&L Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exc 0.06sqm but n exc 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match, over and including 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B-0 using 12.5mm graded crushed stone aggregate,complete all as specified and directed

Supply only liquid water proofing compound

S&F in repairs vitreous China squatting pan, Orissa pattern, size 580x440mm, white with integral foot rests, 'P' or 'S' trap including provision of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match complete all as directed.

S&F PVC (SWR) pipe 110mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as directed.

S&F PVC (SWR) pipe 75mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as directed.

S&F PVC (SWR) reducers 110/75mm bore complete all as directed.

S&F 110mm bore PVC (SWR) junction, single (Single T) equal or un equal

S&F PVC (SWR) bends 110mm bore, any radius complete all as directed.

S&F PVC (SWR) bends 75mm bore, any radius complete all as directed.

S&F PVC (SWR) vent cowl 75mm dia.

S&F PVC (SWR) vent cowl 110mm dia.

S&F in repairs PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet.

S&F in repairs PVC valve less, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle, brackets complete including PVC connection and outlet pipe all as directed. [Make: 'Slim line' of M/s Parry ware/ 'Champion' of M/s Hindustan Sanitary ware/ 'Sleek+' of M/s Hindware]

S&F in repair vitreous china white flat back wash hand basin 550 x 440mm size including 15mm dia PVC connection 600mm long, brass CP waste coupling, 32mm dia PVC waste pipe, CI/MS brackets including cutting for and pinning in brackets or fixed with brass screws all as directed.

Taking up or down galvanized steel tubing 15mm bore with fittings.

Taking up or down galvanized steel tubing 20mm bore with fittings.

Taking up or down galvanized steel tubing 25mm bore with fittings.

S&F GI tubes 15mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F GI tubes 20mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F GI tubes 25mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laid in floors complete all as specified.

S&F in repairs vitreous china ware wash down water closet pan (pedestal pattern) white including PVC seat cover with mild steel chromium plated or aluminized hinging device, fixing bolts jointing to flushing cistern and flush pipe anti syphonage pipe etc complete all as specified and directed

S&F in repairs vitreous china urinals half stall type complete including urinal spreader pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement all as specified.

S&F 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 90gms)

S&F 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 110gms)

S&F 15mm angle valve any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 110gms)

S&F 15mm Stop valve of PTMT with long shank and cup (concealed type) any colour high pressure screwed for iron pipe and fixed in repairs all as specified. (Minimum weight 110gms)

Supply and replace siphon set suitable for existing PVC flush tank complete all as specified and as directed.

S&F PVC flexible waste pipe, 32mm bore, 900mm long suitable for wash hand basin/ sink complete with adapter.

S&F in repairs 15mm dia Pillar taps, cast copper alloy, with long neck, chromium plated fancy type with aerator, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 15mm dia angle valve cast copper alloy fancy type chromium plated with crutch handle and wall flange complete all as specified and as directed.

S&F in repairs 15mm dia stop valve concealed type cast copper alloy fancy type chromium plated with crutch handle and adjustable wall flange including dismantling portion in the wall as required including making good to match with existing complete all as specified and as directed.

S&F in repairs Bib taps, 15mm bore, cast copper alloy, chromium plated with crutch handle, short body with wall flange, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed.

S&F in repairs Bib taps, 15mm bore, cast copper alloy, chromium plated with crutch handle, long body with wall flange, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed.

S&F in repairs cast copper alloy, chromium plated 2 way bib cock 15mm dia with crutch handle with wall flange complete all as directed.

S&F in repairs hand shower (Health Faucet) (ABS Body) with 1 meter long easy flex tube in chrome finish & wall hook complete all as directed.

S&F in repair brass chromium plated Soap dish complete all as directed.

S&F PVC mirror cabinet of size 350x450mm with hinged door covered with mirror, with brush holder, pouch holder, shelves etc. complete all as directed.

S&F in repairs brass spindle for bib tap/ stop valve/ angle vale of any size complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

M&L for glazed ceramic digitally printed tiles of size 300x450mm, 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:3 complete all as specified.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid and including 15mm thick screed bed in CM (1:4) complete all as specified.

Taking down Chowkats or frame not exc 1.5Sqm each with shutters (without taking off shutters from the frames), all as specified.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified inSSR Part-II section -8 and directed by Engineer -In-Charge.(Make-Sintex/Rajshree wood plastic limited/Nandi/National)

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, & S & F in the frame at site as per specification and as directed by Engineer-in-Charge. (Make-Sintex/Rajshree wood plastic limited/Nandi/National)

S&F MS butt hinge cold rolled medium weight 100mm size

S&F anodised aluminium barrel tower bolt 150mm long.

S&F 'D' type handle aluminium anodized 125mm in size.

S&F Aluminium Sliding Bolt of Size 200mm

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 sq.m each all as directed

M&L for uPVC factory made, white colour louvered ventilators made of extruded profiles with figured/ frosted glass louvers; profiles of frames and sash will be mitred cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners complete as directed by the Engineer-in-charge.

Please Enable Macros to View BoQ information