Sunadi Pumping water supply scheme.

Amount

Supply and cartage, laying and jointing of following sizes of MSERW pipes YSt 210 grade pipe conforming to latest BIS code lowering into trenches, jointing by electric welding process with proper grade of electrodes suitable for jointing of water supply lines by cutting of pipes and making required bends by welding, testing of pipeline including supply of all material and labour T&P etc. complete.

65 mm dia, 4.8 mm thick

Supply and cartage, laying and jointing of following sizes of GI pipe conforming to latest BIS code with specials, fitting, lowering into trenches, laid to true alignment & gradient, cutting,threading and testing of pipeline including supply of all material and labour T&P etc. complete.

15 mm GI (Medium) Pipe

20 mm GI (Medium) Pipe

25 mm GI (Medium) Pipe

32 mm GI (Medium) Pipe

40 mm GI (Medium) Pipe

Supply of all materials, labour and T & P etc. and construction of Uttranchal French well intake as per type design and drawing complete in all respect.

Supply and installation of Bucket Type Chlorinator of 25 L Capacity.

Supply of all material, labour, T&P etc all complete and provide RCC cross wall 0.75m high at gadhera tapping point for the protection of intake from heavy flood.

Excavation in soil mixed with single boulders etc. requiring the use of special T&P, if any, for pipe line trenches including lift up to 1.5m and lead up to 30m with back filling, watering, ramming of excavated earth in the trenches.

Excavation same as above item but excavation in decomposed, weathered or soft rock.

Painting of MSERW Pipes with two coats black anti-corrosive bitumastic paint of approved brand and manufacture

Earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 mtr in width or 10 sqm on plan ) including dressing of sides and ramming of bottom, lift up to 1.5 mtr including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m in all kind of soil for site development of sites for CWR.

Design, carrying out safe bearing capacity of soil (SBC only for capacity 130.0 KL) and construction of R.C.C. semi sunk sump / CWRs of following capacity excluding earth work in cutting for site development including supply of necessary scaffolding, shuttering and other accessories alongwith construction of valve chambers, fixing of inlet and outlet pipes, making bye pass arrangement & fixing of lightening conductor & M.S. Manhole, supply and fixing of M.S. Steel Ladder outside and inside the tank and fixing of railing around top dome as per approved design of R.C.C. tank in latest IS codes including acrylic painting (apex or equivalant) and also connection with the existing network alongwith carting of all materials including supply of all materials, labour, T&P etc. complete.

40.0 KL Capacity

10.0 KL Capacity

Supplying and fixing of following sizes of valves including carting the same upto site of work and fixing the same in water supply lines including cost of valves, specials, labour and T&P complete in all respect.GM Wheel / Gate valves (Class I) as per IS 788/1971

25 mm dia

32 mm dia

40 mm dia

50 mm dia

Supply and fixing of following sizes of sluice valves including all T&P material for completion of work for following sizes for rising main.

65 mm dia. Cast Steel Sluice valve, W.P. 30 kg/sqcm.

Supply and fixing of following sizes of reflux valve including all T&P material for completion of work for following sizes for rising main.

65 mm dia. Cast Steel reflux valve, W.P. 30 kg/sqcm.

Construction of stone masonry chamber 60x60x60 cm, inside in 1:4 cement & sand mortar with MS MH cover on top the chamber with proper locking arrangement for Wheel Valve chamber .

Design and construction of Pump house of size 5.50m x 4.50m x 3.50m in RCC framed structure and brick masonary wall with RCC roof excluding electrification works and foundation of pumps as per approved design and drawings including all materials, labour, T& P etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level,1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C. Work Using Thermo-Mechanically Treated Bars including straightening, cutting, bending, placing in position and binding all complete.

Centering and shuttering including strutting, roping etc. and removal of form work

Random rubble masonry laid dry with hard stone in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royaltiies etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level in 1:2:4 (1 Cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size).Nominal mix

Random rubble masonry laid in 1:6 cement and sand mortar with hard stone in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royaltiies etc. complete.

MPS Centrifugal Pump (250 LPM,215 M Head)

Electric Motor

Main switch 100 Amps

Base Plate

Fully Auotomatic Auto Transformer Starter

Control Panel

Power Wiring & Earthing Material

Main Piping & Valves

Gauges

Chain pully block with travelling trolley

Bulk water meter

Tools

Rubber Resistance Sheet (1×2×0.025 M)

Installation & commissioning of Pumping Plants & related acceessories for all stages.

Testing : At Works

At Site

Painting

Carting

Maintenance (12 months)