Repair to chajja fascia roof projection plastering plinth protection and external periodical on certain bldgs under AGE B/R-II GE (AF) No.2 Jodhpur

M&L for chipping of slab/column/beams/chajjas/parapet/roof projection and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minimum of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechnical compressor, cleaning the exposed reinforcement with wire brush & applying Fosroc Reebaklens RR rust remover or equivalent in two coats over rusted reinforcement surface and providing anti corrosive coating with two component exopy based zinc rich primer/Rust passivation Inhibitor coat at the rate of 5 sqm/Ltr with Fosroc Nitozinc primer or equivalent to reinforcement surface as per manufacturers instructions including all scaffolding, machinery, tools tackels and men materials and clearing of debris complete all as specified and as directed by Eng-in-charge. Make: Reebaklens RR rust rust remover, Nitozinc primer of Fosroc or equivalent in Dr Fixit/ACC/L&T/STP/Sika India/Asian paints/bostik/Choksey chemicals/Thermax limited/Hindcon Chemicals. (Note: The work shall be carried out upto 12.00M height and through approved company authorised applicator.)

M&L for applying bond coat on the prepared old surafce of concrete/masonry to receive new polymer mortar/polymer modified mortar or micro concrete with two coats of Fosroc Nitobond SBR or equivalent in Dr Fixit/STP/Bostik/Sika/Choksey chemicals/ThermaxLtd/CICO as per manufacturer specifications. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. Item rate inclusive of all materials, labors, supervision, tools, tackles, transportation, fixing etc including taking down existing plaster/any type of treatment including all scaffolding, machinery, tools tackels and men materials and clearing of debris complete all as specified and as directed by Eng-in-charge. Make: Fosroc Nitobond SBR or equivalent in Dr Fixit/STP/Bostik/Sika India/Choksey chemicals/Thermax limited/BASF/Asian paints/Hindcon Chemicals . (Note: The work shall be carried out through approved company authorised applicator upto 12m height.)

M&L TMT bars 6mm to 8mm dia bar, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm diameter including all necessary scaffolding, machinery, tools and men materials complete all as specified and as directed by Engr-in-charge. (Note: The work shall be carried out upto 12.0M height)

M&L drilling holes with 10mm to 20mm dia and 75 to 100mm deep as required and filling the holes after inserting of reinforcement dia 8 to 16mm for anchoring at ends/shear connector and filled the holes with two component polyster resin anchoring grout (two pack system consist of 1 part of resin and 2 hardner part) hole with Fosroc Lokfix E55S/E45T @ 150gm per holes with all necessary scaffolding, machinery, tools tackels and men materials and clearing of debris complete all as specified and as directed by Eng-in-charge. Make: Fosroc Lokfix E55S/E45T or equivalent in Dr Fixit/STP/Seika/bostik/Choksey chemicals/Thermax limited/BASF?Asian paints/Hindcon Chemicals/Hilti. (Note: 1. Reinforcement shall be paid and measured separately. 2. The work shall be carried out upto 12.00M height and through approved company authorised applicator.)

M&L for preparation the surface and applying 40mm thick in layers, each layer n.exc 20mm thick with polymer modified mprtar (PMM) on surface of slab/columns/beams/chajjas/parapetroof projection/balcony/staircase with Fosroc Renderoc SP40 or equivalent in Dr Fixit/STP/Asian paints/Sika/Bostik/CICO/Choksey chemicals /Thermex ltd/Hindcon chemicals including all necessary scaffolding, machinery, tools tackels and men materials and clearing of debris complete all as specified and as directed by Eng-in-charge. (Note: The work shall be carried out upto 12.00M height and through approved company authorised applicator.)

M&L for 10mm thick cement plaster CM 1:3 with added intigral waterproofing compound including grooves and preparation on new plaster surface & applying wheather proof exterior emulsion paint over a coat of primer. Fosroc Conplast WL Extra or equivalent in Dr Fixit/ACC/L&T/STP/Sika/Bostik/CICO/Choksey chemicals /Thermex ltd as per manufacturer instruction including all necessary scaffolding, machinery, tools tackels and men materials and clearing of debris complete all as specified and as directed by Eng-in-charge. (Note: 1. WPC shall be paid and measured separately. 2. The work shall be carried out upto 12.00M height and through approved company authorised applicator.)

M&L preparation of old distempered wall surface including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and effloescent salts and trading oil and greasy spots and applying a coat of distemper oil emulsion any tinted over one coat of wall care putty. Complete all as specified and directed by Engineer-in-Charge.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete including Demolition of brick work or stone masonry, built in cement mortar.

M&L for rendering 10 mm thick in CM(1:6)on walls, finishing even and smooth without using extra cement similar work, hacking and Preparation of new plastered wall surface and applying two coat of oil bound distemper over one coat of alkali resisteant primer, incl and over two coat of wall care putty complete all as specified and as directed by Eng-in-Charge.

Dismantling of plain or corrugated steel sheeting any gauge, thickness incl naintal or similar pattern roof covering, complete all as specified and directed by engr-in-charge