CONSTRUCTION OF CENTRAL MEDICAL STORE AT COVERD PARTY PLOT STAGE PORTION OF EXISTING MULTILEVEL PARKING AT TP-04 (ASHVINIKUMAR-NAVAGAAM), FP-M/5 PAIKEE IN EAST ZONE-A(VARACHHA) ZONE-A, SURAT. (3RD ATTEMPT)

NAME OF WORK : CONSTRUCTION OF CENTRAL MEDICAL STORE AT COVERD PARTY PLOT STAGE PORTION OF EXISTING MULTILEVEL PARKING AT TP-04 (ASHVINIKUMAR-

NAVAGAM), FP-M/5 PAIKEE IN EAST ZONE-A(VARACHHA) ZONE-A, SURAT.(3rd ATTEMPT)

NOTICE NO. - DMC(D)/ EZ-A/02/2026-2027

SR. NO. DESCRIPTION QTY UNIT AMOUNT

PART (A) - CIVIL WORKS

WORK UP TO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of useful materials & disposing of the excavated stuff

upto 50 mt. Lead & all lift, watering etc.Comp.

(A) Loose or Soft soil Executed With Mechanised Efforts / Machinaries

SMC SOR-PAGE NO 1 IT NO

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) & disposal ofthe surplus excavated soil as

directed within a lead of 50 M. For following diameter of piles.

250mm dia 0.00 Rmt 326.84

SMC SOR ITEM NO. 94, PG.NO.

Providing and filling rubbles including hand packing and filling interstices with quarry spalls behind

abutments and between returns as directed.

SMC SOR , ITEM NO. 22, PG. NO. 3 3.50 C.M. 1064.80

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone agg 20m.m Nominal size)&curing

comp. excl. cost of form work in :(a) foundation & Plinth

(A) Foundation 1.50 C.M. 3005.76

(C) Grade Slab 0.00 C.M. 3005.76

SMC SOR, PAGE NO 1 IT NO

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone agg. 20 mm nominal size)& curing

5 comp. Includ.cost of form work but exclu. Cost of reinforcement for reinforced concrete work in : (A)

Foundation, footing, Base of columns and Mass concrete

(C) Grade slab 0.00 C.M. 3637.34

SMC SOR, PAGE NO 09 IT NO

Providing, mixing, placing, compacting by machine vibrator, curing, testing M20 Design mix concrete as per IS

6 456:2000 (latest revision) and as per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement

(A) foundation, footing, base of columns and mass concrete 4.80 C.M. 3918.70

SMC SOR, PAGE NO 14 DESIGN MIX M20

Providing, mixing, placing, compacting by machine vibrator, curing, testing M20 Design mix concrete as per IS

7 456:2000 (latest revision) and as per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12550.27

(2) Having cross sectional area more than 0.085 sq. mt .up to 0.12 sqmt. 0.00 C.M. 11099.15

(3) Having cross sectional area more than 0.12 sq. mt. 1.60 C.M. 9153.32

SMC SOR, PAGE NO 14 DESIGN MIX M20

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 8957.39

(2) Having cros sectional area more than 0.08 sq. mt and upto 0.12 sq.mt. 0.00 C.M. 8038.38

(3) Having cross sectional area more than 0.12 sq. mt . 3.70 C.M. 6961.62

SMC SOR, PAGE NO 14 DESIGN MIX M20

(E) RCC Wall - 200 mm Thick 4.40 C.M. 8191.72

SMC SOR, PAGE NO 14 DESIGN MIX M20

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work incl. bending, binding & placing in

position etc.comp.---

Upto G.L./P.L. 1834.00 Kg. 76.21

SMC SOR, PAGE NO 1 IT NO

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

Cement Mortar 1:6 (1- Cement : 6 -fine sand) (C) Fly Ash Bricks

SMC SOR, PAGE NO 2 IT NO 16 3.70 C.M. 4511.97

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering.

SMC SOR, PAGE NO 1 IT NO 10 44.50 C.M. 130.39

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc. complete.

SMC SOR, PAGE NO 1 IT NO 11 6.90 C.M. 289.06

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for

termite control treatment including labour and material consistment with ISI specification. Using Chlordene

12 and Chiorpurfiles 20 EC. As per 6131_paret-II Consentration Weight one percent is recommended i.e. one litre 10.60 S.M. 82.89

20 EC chemical emulsion with 19 liter give 1% concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 litre chemical / Sqm of surface is recommended as per IS.

SMC SOR, PAGE NO 12 IT NO

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar surfaces at all floor levels

consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M.

1:1 (1 cement: 1 sand) apply thick cement slurry and apply roller horizontal as well as vartical ( two times ) up

to good quality and size of grain in elevation as per directed by engineer incharge.

SMC SOR, PAGE NO 3 IT NO 28 MR 12.00 S.M 324.00

Providing & applying two coats of weather shield max paint (3 coats may be required in case of darker

colours.) of ICI Dulux or Apex Ultima of Asian Paint including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering, curing etc. complete and as directed by the

architects and manufacturers. Surface Preparation : surface is thoroughly clean, dry and free from all loose

14 dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/ stiff coir brush,

followed by water jetting if required. Fill up all minor cracks and defects with white cement and sand mixture

in the ratio 1:3. For application on previously painted wall, previous coatings of paint must be thoroughly

scraped off and Clean the surface thoroughly using wire brushes. Priming: Apply a liberal coat of exterior

acrylic primer and allow it to dry for 4-5 hours. Application of putty is not recommended. Minimum 4-6 hours

duration is required between each coat of weather shield max paint

SMC SOR , COLOR WORK ITEM NO.- 17 MR 10.00 S.M 82.00

TOTAL COST UP TO PLINTH

WORK ABOVE PLINTH

Providing, mixing, placing, compacting by machine vibrator, curing, testing M20 Design mix concrete as per IS

15 456:2000 (latest revision) and as per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12550.27

First Floor 0.00 C.M. 12589.87

Terrace Floor 0.00 C.M. 12629.47

SR. NO. DESCRIPTION QTY UNIT AMOUNT

PART (A) - CIVIL WORKS

(2) Having cross sectional area more than 0.085 sq. mt .up to 0.12 sqmt.

Ground Floor 0.00 C.M. 11099.15

Terrace Floor 0.00 C.M. 11138.75

At Staircabin Top 0.00 C.M. 11178.35

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 1.20 C.M. 9153.32

First Floor 1.20 C.M. 9192.92

Terrace Floor 1.20 C.M. 9232.52

At Staircabin Top 0.00 C.M. 9272.12

(SOR SMC Pg No. 14 Design Mix M20)

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 8957.39

First Floor 0.00 C.M. 8996.99

(2) Having cros sectional area more than 0.08 sq. mt and upto 0.12 sq.mt.

Ground Floor 0.00 C.M. 8038.38

First Floor 0.00 C.M. 8077.98

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 28.10 C.M. 6961.62

First Floor 2.40 C.M. 7001.22

Terrace Floor 2.40 C.M. 7040.82

(SOR SMC Pg No. 14 Design Mix M20)

(2) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 7850.27

First Floor 0.00 C.M. 7889.87

(3) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 60.30 C.M. 7268.63

First Floor 0.00 C.M. 7308.23

Terrace Floor 0.00 C.M. 7347.83

(4) Having more than 13 cm. Thickness

Ground Floor 0.00 C.M. 6690.46

First Floor 0.00 C.M. 6730.06

(SOR SMC Pg No. 14 Design Mix M20)

Ground Floor 0.90 C.M. 9381.78

First Floor 1.10 C.M. 9421.38

Terrace Floor 1.20 C.M. 9460.98

(SOR SMC Pg No. 14 Design Mix M20)

Ground Floor 5.90 C.M. 6875.78

First Floor 5.90 C.M. 6915.38

Terrace Floor 5.90 C.M. 6954.98

(SOR SMC Pg No. 14 Design Mix M20)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone agg. 20 m.m Nominal size)& curing

comp. incl. cost of from work in: wall caps/ copings.

(SOR SMC Pg No. 9 It No. 97) 0.40 C.M. 3982.62

Providing, mixing, placing, compacting by machine vibrator, curing, testing M20 Design mix concrete as per IS

17 456:2000 (latest revision) and as per tender specification in all items including cost of form work and

rendering but excluding cost of reinforcement

(F) Stair cases including landing etc.

Ground Floor 0.00 C.M. 7062.46

First Floor 0.00 C.M. 7102.06

(G) Vertical and horizontal fins

Ground Floor 0.00 C.M. 9275.80

First Floor 0.00 C.M. 9315.40

(SOR SMC Pg No. 14 Design Mix M20)

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work incl. bending, binding & placing in

position etc.comp.---

Ground Floor 10268.00 Kg 76.21

First Floor 845.00 Kg 77.21

Terrace Floor 1212.00 Kg 78.21

Stair Cabin Top 0.00 Kg 79.21

(SOR SMC Pg No. 2 It No. 15)

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

Cement Mortar 1:6 (1- Cement : 6 -fine sand) (C) Fly Ash Bricks

Ground Floor 74.70 C.M. 4511.97

First Floor 81.20 C.M. 4786.95

Second Floor 68.60 C.M. 5061.92

Stair Cabin Top 24.60 C.M. 5379.24

(SOR SMC Pg No. 2 It No. 16)

Half brick masonry in common brunt clay building bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 - coarse sand ) in foundation and plinth (C)Fly Ash Bricks

Ground Floor 0.00 S.M. 678.86

First Floor 0.00 S.M. 685.11

Second Floor 50.30 S.M. 691.37

(SOR SMC Pg No. 2 It No. 17)

Providing & Applying 15mm.th.cement plaster in single coat on brick/ concrete walls similar surfaces for

21 plastering & finished even & smooth with a floating coat of cement slurry mixed with admixture of lime or

neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and similar surfaces.

Ground Floor 660.60 S.M 237.51

First Floor 853.70 S.M 265.65

Second Floor 633.90 S.M 293.79

(SOR SMC Pg No. 3 It No. 25)

Providing & Applying 10mm.th.cement plaster in single coat on brick/ concrete walls similar surfaces for

22 plastering & finished even & smooth with a floating coat of cement slurry mixed with admixture of lime or

neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand)

(B) for ceilings and soffits of stairs

Ground Floor 514.70 S.M 214.60

First Floor 64.10 S.M 242.74

Second Floor 64.10 S.M 270.88

(SOR SMC Pg No. 3 It No. 24)

Providing and fixing 150 mm wide, approved quality chicken wire mesh (FRP / PVC)at junction of

23 brick work and RCC work or two dissimilar surfaces, at all heights fixed by nails, rowal plugs or tag by

cement mortar 1:3 before applying the plaster, including curing, scaffolding all complete as directed.

Ground floor 58.80 S.M. 102.00

First Floor 45.90 S.M. 102.00

Second Floor 34.90 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124) MR

SR. NO. DESCRIPTION QTY UNIT AMOUNT

PART (A) - CIVIL WORKS

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or similar surfaces at all floor levels

consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of C.M.

1:1 (1 cement: 1 sand) apply thick cement slurry and apply roller horizontal as well as vartical ( two times )

up to good quality and size of grain in elevation as per directed by engineer incharge.

Ground Floor 337.90 S.M 324.00

First Floor 337.90 S.M 324.00

Second Floor 337.90 S.M 324.00

Terrace Floor 84.60 S.M 324.00

(SOR SMC Pg No. 3 It No. 28) MR

25 Providing throating or plaster drip and moulding it to R.C.C. chajja etc. comp.. For all floor

Ground Floor 46.80 R.M 41.66

First Floor 46.80 R.M 41.66

Second Floor 46.80 R.M 41.66

(SOR SMC Pg No. 3 It No. 29)

26 Providing 20 mm deep finished groove in plaster in line and level etc. Comp. For all Floor (M.R.)

Ground Floor 50.00 R.M 50.00

First Floor 50.00 R.M 50.00

Second Floor 20.00 R.M 50.00

(SOR SMC Pg No. 3 It No. 30) MR

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring treads of steps and landing

27 laid on a bed of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush pointing in

Ground Floor 0.00 S.M 1040.35

First Floor 459.00 S.M 1040.35

Second Floor 30.00 S.M 1040.35

(SOR SMC Pg No. 4 It No. 44)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with white cement slurry.

Ground Floor 13.80 S.M 1081.71

First Floor 13.80 S.M 1081.71

Second Floor 92.00 S.M 1081.71

(SOR SMC Pg No.4 It No. 45)

Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria, Jhonson, Nitco, Somani, Bell, Asian or Euro

make in flooring,treads of steps & Landing laid on bed of 20 mm (Average) base of cement mortar 1:6 (1

29 Cement : 6 Coarse sand) on new surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with colour cement slurry including finished with flush pointing &

cleaning the surface etc. comp.Size 24" x 24" For Antiskid tiles

Ground Floor 0.00 S.M 1397.83

First Floor 0.00 S.M 1397.83

Second Floor 13.20 S.M 1397.83

(SOR SMC Pg No.4 It No. 43)

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed

with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc.

complete. (A) 25mm thick

Ground Floor 459.00 S.M 989.45

First Floor 0.00 S.M 989.45

Terrace Floor 0.00 S.M 989.45

(SOR SMC Pg No.4 It No. 32)

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars

31 laid on 10mm thick cement mortar 1:3 (1- Cement : 3 coarse sand) and jointed with gray cement slury

mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.

Ground Floor 0.00 S.M 1076.94

First Floor 0.00 S.M 1076.94

Terrace Floor 0.00 S.M 1076.94

(SOR SMC Pg No.4 It No. 33)

Providing and constructing sandwitch type Granite stone cooking platform 0.6 mt. wide & 0.75 mt.

height, including one end side granite stone (Double Polish) of 1.25 mt. height & front granite stone

patti of 10 cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with

finishing smooth with cement slurry as required and Stainless Steel sink of 0.45 mt x 0.45 mt size of

approved quality and make with required all fitings & fixitures etc. comp as per instruction given by site in

charge at all floors. (Basic rate of Granite Rs.1,200.00 / S.M.)

(SOR SMC,Pg No.11, It No. 123) MR

Providing and filling in depressions of Bath and W.C. At all floor levels, after completing plumbing work of

pans, pipes,traps etc.with cinder or fly ash as directed by Engineer in charge etc. comp..

All Floor 13.20 C.M 500.00

(SMC SOR,Pg No.6, It No. 61)

Providing & fixing 35mm.th. Indian teak wood shutters for doors, windows & clearstory windows incl.

34 Indian teak wood frames of finished size 12cm x 7cm.incl. anodized aluminum fixtures & fastenings incl.

Primer coat of approved quality & two coats of oil painting etc. For all Floor

(A) Fully Panelled 24.50 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick FRP shutter with wood grain raised

panneled design finish shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected polyurethene foam done in situ along with embedded wooden

pieces for stiffening & also taking hinges & fixtures. The whole FRP frame & shutter is to be water proof

weather proof,termite proof &resistance to mild acid/alkali. Rates are to be inclusive of S.S.hinges with

fastener sleeve & alluminium fixtures & fastentings.

(A)'Same as Above But Without Frame 9.40 S.M 2019.98

(SMC SOR,Pg No.5, It No. 55)

Providing & fixing 35mm.th. Flush Door Solid Double Core type Both Face water proof Ply Vennered &

1.5 mm th.laminate shall be pasted on both side with adhesives as specified by the manufacturers. The

laminate shall be as per approved shade & texture, of make incl. Sal wood frames of finished size 12cm x

7cm.incl. S.S. Hinges with nessary screws & Anodized aluminum fixtures & fastenings For all Floor

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 4.90 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

SR. NO. DESCRIPTION QTY UNIT AMOUNT

PART (A) - CIVIL WORKS

Providing and fixing window having extruded aluminium Powder Coated section frame main outer size

63.50 x 38.10 x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track member

size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.) vertical member

of size 61.85 mm x 31.75 mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding shutters

37 of horizontal member size 40 mm x18 mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical 0.00 S.M 1705.67

member of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @

Wt. of 0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted float glass with powder coated

aluminium fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc. complete

(A) Same as above but colour anodized 77.50 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A)

Providing and fixing window having extruded aluminium Powder Coated section frame main outer size

mm x 24 mm x 1.17 mm (of jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three track

member size 92 mm x 31.75 mm x 1.30 mm (of jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical

member of size 92 mm x 31.75 mm x 1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt) with sliding

shutters of horizontal member size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947 @ wt. of

kg/mt), vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8949 @ wt. of 0.456 kg/mt)

with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminium fittings & fixtures

and transparent silicon sealant glass fixing to frame as per details etc.

(A) Same as above but colour anodized 0.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A)

Providing and fixing standared extruded of aluminium section of size 61 x 37.0 x0.90 mm (of Jindal section

39 no.14080, @ Wt. 0.471 Kg per mt) with Powder Coated alluminium frame with 5 mm thick transparent 0.00 S.M 2336.00

bronze colour tinted float glass as details etc. complete for fix window

A) Same as above but Colour anodized 1.60 S.M 2336.00

SMC SOR Alluminium Work ITEM NO.5A MR

Providing & laying granite slab 18mm thick in Window-Door seal Frame Etc laid on 10mm thick cement

40 mortar 1:4 (1 Cement : 4 Coarse sand) with nessary adhesive material and finished with flush pointing in

white or colour cement, including rubbing & polishing comp.. (Basic Rate:- Rs.1000.0/S.M.)

For all Floors. 94.80 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41 MR

41 Labour Charges For Edge Finished For Granite for all floors

For all Floors. 1232.10 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

Providing & fixing M.S.Grills of required pattern to wooden frames of windows etc. At all floor levels with M.S.

42 flats at required spacing & frame around square or round bars with round headed bolts & round headed bolts

and nuts or by screws incl. Priming coat of Red lead paint etc. comp.

For all Floors. 833.60 Kg. 104.20

SMC SOR, PAGE NO 14 IT NO

Painting two coat (excluding priming coat) on new steel and other metal surface with synthetic enemal

paint, burshing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters

For all Floors 41.70 S.M 65.31

SMC SOR, COLOUR IT.No. 8, Pg No.15

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same

with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories &

stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of

waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight

of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

SMC SOR, PAGE NO 11 ITEM NO 120, MR 0.00 Kg. 450.00

(1) The whole work is to be executed through specialized agency with a guarantee of 10 (Ten) years given on a prescribed

proforma duly stamped (2) The rate shall include for work at all floors & conducting water proof test as directed. (M.R.)

B) Providing and laying integral cement based water proofing treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of following operations. (a) Applying and grouting a slurry coat of

neat cement using 2.75 kg/sqm of cement admixed with proprietary water proofing compound comforming to IS:2645

over the R.C.C. slab including cleaning the surface before tratment.(b) Laying cement concrete using broken bricks/brick

bats 25 mm to 100 mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand) admixed with proprietary water

proofing compound conforming to IS:2645 ,brick bats is finally covered by jointless cement plaster 20mm th. in C.M. 1:4

added with special water proofing compound confirming to IS:2645 & top smooth finished with trowel with false

chequered marking of 300 mm.size.The treatment is carried along the vertical surface of the parapet & other adjoining

wall up to height of about 300 mm in a shape of quarter round vata Incl. curing etc. Comp. With average thickness of

mm and minimum thickness at khurra as 65 mm.(c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All above operations to be down in order and as directed and

specified by the engineer-in-charge. With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

(Cement consumption 0.511 Bags / S.M.)

(c) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final

test. All above operations to be down in order and as directed and specified by the engineer-in-charge. With average

thickness of 120 mm and minimum thickness at khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

Terrace and staircabin top 0.00 S.M 511.00

SMC SOR, PAGE NO 6 IT NO 62 B M.R.

(A) Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of

W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water proofing compound confirming to IS:2645 about 25 mm. th' in the

floor of the depression & about 18mm th' On the side walls of the depression up to the floor level, water proofing plaster

about 18 mm. th' be continued on the walls above the floor level for a height of 600 mm. with surface suitable to receive

further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size spreading @0.008 C.M./S.M., thoroughly embedad in

plaster layer. as per specifications & instructions of Engineer in charge (Cement consumption 0.316 Bags / S.M.)

For all Floors 44.70 S.M 296.00

SMC SOR, PAGE NO 6,IT NO 62 B M.R.

Providing & Applying Surface Water Proofing treatment on existing Water proofing.

(1) Cleaning Surface Slab up to Mother slab & free from any Loose Material. Paint, Dust, Greaze or Remove all existing

bituminious Coating Completely. It is recommended to use intense wise brushing on high speed Water jet for through

(2) The Substrate must be checked for its Soundness using Small hammer. All Cracks at corner joint, Channels and Parapet

Should be Properly treated.

(3) Cracks/construction joints treatment: Opening the cracks/construction joints,if any, in V/U shape using electrically

operated cutting machine. Cleaning the surface thoroughly from dust and loose partical using wire brush and air blower.

Filling the cracks if any with polymer modified cement mortar hybrid PU Sealant depending on the width of crack/joint.

(4) Epoxy primer:The Epoxy primer must be applied on clean and dry surface by mixing base and hardner in equal

proportions with the help of strirrer and adding equal amount of water and appling on the surface at 80-100 grams per

sqmt and allowed it to dry untill tack free.

(5) Hybrrid polyurea part-A(base) and part-B(hardner) are packed in two separate containers having the correct

predetermined mixing ratio by weight.Stir individual container separately,Part-A and PArt-B very well, to get

Terrace and staircabin top 496.40 S.M 494.00

SMC SOR, ,REHAB. WORK IT NO 17 M.R.

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Providing and laying broken china mosaic flooring for terrace usingPART 12mm (A)to- CIVIL

broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions and extending them upto 15 cm along

the wall clearing with water and oxalic acid etc. as directed.

SMC SOR, PAGE NO 12 IT NO 131 496.40 S.M 747.29

Apply two coats of putty and two coats of primer of approved brand and manufacture on new wall surface to

48 give an even shade including thoroughly brushing the surface free from mortar dropping and other matter and

sand papered smooth.

(A) for wall and similar surfaces

For all Floors 2148.20 S.M 40.59

(B) for ceilings and soffits

For all Floors 642.90 S.M 40.59

SMC SOR, COLOUR IT.No. 4, Pg No.15

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall

49 surface to give an even shade including throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 2148.20 S.M 79.39

(B) for ceilings and soffits

For all Floors 642.90 S.M 79.39

SMC SOR, COLOUR IT.No. 5, Pg No.15

Providing & applying two coats of weather shield max paint (3 coats may be required in case of darker

colours.)of ICI Dulux or Apex Ultima of Asian Paint including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and colour approved by architects, on exterior surfaces of

the building including scaffolding, preparing the surface, watering, curing etc. complete and as directed by the

architects and manufacturers. Surface Preparation : surface is thoroughly clean, dry and free from all loose

50 dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/ stiff coir brush,

followed by water jetting if required. Fill up all minor cracks and defects with white cement and sand mixture

in the ratio 1:3. For application on previously painted wall, previous coatings of paint must be thoroughly

scraped off and Clean the surface thoroughly using wire brushes. Priming: Apply a liberal coat of exterior

acrylic primer and allow it to dry for 4-5 hours. Application of putty is not recommended. Minimum 4-6 hours

duration is required between each coat of weather shield max paint

For all Floors 1098.30 S.M 82.00

SMC SOR, colour works,Pg No.16,item no.-17

Providing & laying granite slab 18mm thick in flooring, treads of steps and landing laid on bed of 20mm

51 thick cement mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished with flush

pointing in white or colour cement including rubbing and polishing complete. (Basic Rate:- Rs.1347.46/S.M.)

For all Floors. 0.00 S.M 2410.00

SMC SOR 15-16, PAGE NO 4,IT NO 39 M.R.

Providing & laying granite slab 18mm thick in skirting, risers of steps, dedo and pillars laid on 10mm

52 thick cement mortar 1:4 (1 Cement : 4 Coarse sand) and finished with flush pointing in white or colour

cement including rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

SMC SOR 15-16, PAGE NO 4,IT NO 40 M.R. 0.00 S.M 2449.00

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar bent to shpe with hooked ends to RCC

slabs curing, layig including painting the exposed portion of loops, all as per standard design complete.

For all Floors. 40.00 Nos 129.02

SMC SOR , PAGE NO 5, IT NO

Steel work welded in built up sections, framed work including cutting, hoisting, fixing in position and applying

a priming coat of red lead paint (A) in beams & joists channels angles, tees, flats with connection plates or

angle cleats as in main & cross beams,hip & trussed purlins connected to common raffers & the like.

For all Floors. 1.00 Qtl. 9047.86

SMC SOR ,Pg No.9,IT NO 98(A)

Providing and Fixing Hollow steel Sections Framed Work including Cutting, Hoisting, Welding & Fixing in

position Purlin, Main Chord etc. as per Engineer- in-charge.TATA / JINDAL / ASIAN Make

For all Floors. 250.00 Kg. 126.00

SMC SOR ,Pg No. ,IT NO

Providing & fixing colouron galvaniced steel, zinc / aluminium allus coated sheet 0.5 mm. thick roofing fixed

56 with gslvanised grom J or L hook bolts and bolt 8mm dia with bituman and impet washer filled with

white lead etc. Excluding the cost of purlins rafter and trusses. (Tata / Jindal or equivalent)

SMC SOR ,Pg No. ,IT NO

Providing and applying cement mortar (1:3) modified by using polymer and expanding grout additives at

25mm thickness for repair/strengthening of various RCC elements at all floor levels, lead, lift, including

breaking, chipping, dismentling existing cover concrete and exposing existing reinforcement, applying

57 wirebrush for making surfaces of steel and concrete free from rust and other loose materials, applying rust

removing chemical on existing reinforcement, applying anti-corrosive coating on existing reinforcement,

applying polymer bonding agent on existing concrete surfaces before applying polymer modified mortar in

specified thickness as directed by the Engineer-in-charge.

SMC SOR, ,REHAB. WORK IT NO 2 M.R.

RCC Core Cutting is about making precise, circular cuts for creating holes of required diameters for

58 Rehabilitation in civil works. The core drilling rod is fitted with diamond pieces at the drilling end. The core

cutting machine can be used for both horizontal and vertical hole making purposes.

SMC SOR, ,REHAB. WORK IT NO 12 M.R.

SMC SOR, ,REHAB. WORK IT NO 13 M.R.

59 Polishing flooring after repair work done as direct by E.I.C 459.00 S.M 172.00

SMC SOR, ,REHAB. WORK IT NO 15 M.R.

Providing and filling Epoxy grout of approved or suggested brand by consultant / Engineer in

charge in 4mm to 6mm thick tiles joint including spacer with cleaning of joint by vacuum or blower etc

SMC SOR, ,REHAB. WORK IT NO 15 M.R.

Providing and applying cement mortar 1:4 enriched with expanding grout additive in required proportion in

cement for repair of cracks in RCC and non-RCC members after making 25mm x 25mm groove, cleaning the

surface and applying coat of bonding, finishing smooth the repaired surfaces, providing and applying curing

61 agent on the repaired surfaces, etc. complete at all floor levels as directed by engineer-in-charge. The make 100.00 R.M. 40.00

and quality of expanding grout additives, bonding agent, curing agent, etc. shall be approved by the engineer-

in-charge. The procedure for application shall be strictly in accordance with manufacturer's detail

specification, which shall be submitted before start of work and shall be approved by the Engineer-in-charge.

Demolishing Brick work and stone masonry incl. including stacking of serviceable material and disposal of

unserviceable material with all lead and lift. (ii) In cement mortar

SMC SOR- DEMOLATION, It No.

Removing the scraping of old deteriosted plaster of any thickness form wall/R.C.C. member including

strcking of serviceable material and disposal of unserviceable material from site of work with all lead and lift.

SR. NO. DESCRIPTION QTY UNIT AMOUNT

SMC SOR- DEMOLATION, It No. 03 PART (A) - CIVIL WORKS

Demolition including stacking of serviceable materials and disposal of unserviceable materials with all lead

and lift. 1.) R.C.C work

SMC SOR- DEMOLATION, It No.

Dismantling C.I. Pipes, G.S.W. Pipes and A.C.,PVC rain water pipes with fittings and clamps including

stacking the materials with all lead & lift ( For any Dia. of pipes )

SMC SOR- DEMOLATION, It No.

Dismentaling of Tiles floors laid in mortar including stacking of serviceable material and disposal of

unserviceable material with all lead and lift

SMC SOR- DEMOLATION, It No.

Dismantling Doors, Windows, Ventilators etc. (wood or steel) shutters including chowkhats, architreaves,

67 holdfasts, and other attachment etc. complete and stacking them within all lead and lift. (1) Not exceeding 3 6.00 EACH 187.71

sq. meters in area .

SMC SOR- DEMOLATION, It No.

Providing and fixing rebar of following diameter using chemical grout of Swanchore/Hilti/Fischer or

equivalent make including cost of all equipments, tools, material, labour, etc. Standard procedure as

mentioned in manufacturer's specifications shall be strictly followed, which shall be submitted and got

approved from the authority prior to start of work. The rate shall also include cost of drilling of hole of

required diameter and depth as mentioned in manufacturer's specification, cleaning the hole with required air

blower and other necessary tools and tackles, positioning, providing and grouting chemical, allied fixtures and

fasteners, etc. but excluding the cost of reinforcing bar etc. complete. Item includes necessary scaffolding,

staging, labour, tools and equipments, etc. complete as directed by the engineer-in-charge.

SMC sor Page no10 It No.

fixing of CO2 type Fire Extinguisher of capacity 4.5 kg filled with Co2 Gas as per IS 15222 with controll

69 discharge mechanis, fitted with Hose & Horn applicable on Class B fire rating 21B confirms to IS 15683 8.00 Nos 4200.00

bearing ISI mark. Co2 cylinder as per IS

SMC SOR, PAGE NO.12,IT NO 136 (MR)

Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as per IS 4308 with necessary

clamp for erection on wall.6 Kg Capacity

SMC SOR, PAGE NO.12,IT NO 135 (MR)

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle

71 at bottom duly painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on 8.00 Nos 350.00

existing stand provided or hung on wall hook.

SMC SOR, PAGE NO.12,IT NO 137 (MR)

TOTAL COST OF SUPER STRUCTURE

WATER SUPPLY AND SANITATION

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all floor levels, size 500mm x 400 mm

72 incl. 100 mm size "P'or "S" trap for water closet squatting pan joining the trap with the pan & soil pipe in

C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117*,Jaquar,HindWare

For all Floors. 1.00 Nos. 3275.00

SMC sor- Sanitary Items,Page no22,It No.

Providing and fixing Wash Down Water closet European type W.C. pan with integral P or S trap with normal

73 closing seat cover L bend ncluding jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 find

sand) (A) Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/ C0278,HindWare sleek 20011, Jaquar- CNS-

WHT-751P180SPPZ

SMC sor- Sanitary Items,Page no21,It No.

Providing and fixing plastic seat and cover for wash down water closet with C.P. brass hinges and rubber

buffers (B) Plastic seat and cover.

For all Floors. 2.00 Nos 291.33

SMC sor Page no7 It No.

Providing & fixing Wash Hung basin with single hole for pillar tap , Size- 550 x 400 mm at all floor levels,

with C.I. or M.S. Brackets painted white incl. cutting holes & making good the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar SLS- WHT -6801 ,HindWare10004 2.00 Nos 2656.00

SMC sor- Sanitary Items,Page no21,It No.

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all floor levels, mounted on 6 mm. th.

A.C. sheet or plywood sheet & fixed to wooden plugs with C.P.brass screws and washers etc. For all Floor

All Floor 2.00 Nos 833.73

SMC sor Page no7 It No.

77 Providing & fixing C.P. brass pillar cock with copper connection, C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare Cat. No.: F650003, Jaquar FLR-5011N 2.00 Nos 1423.00

SMC sor Sanitary Items,Page no21,It No.

78 Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, Parry ware G3104A1, HindWare F280002 BIB COCK, Jaquar FLR-5047 N

SMC sor Sanitary Items,Page no21,It No.

79 Providing flush cock consisting lever, cartridge sleeve & flange & concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101 , Parry ware T9824A1&T9823A1, Jaquar

FLR 5083 KN , CONCEALED BODY ALD-081,HindWare F280052 & CONCEALED STOP COCK F850105

SMC sor Sanitary Items,Page no21,It No.

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with C.P. copper connecting pipe 450 mm long

and nuts, washer and brass flange complete, including cutting and making good the wall where required.

Make- Cera, Parry ware,HindWare

For all Floors. 3.00 Nos 1432.00

SMC sor- Sanitary Items,Page no21,It No.

Providing and fixing Towel Ring fabricated from seamless stainless steel tube 2mm thick in bath room with

polished wall flange at end of bars with heavy duty anchor fasteners & accessories

Make- Cera, Parry ware, Jaquar ,HindWare

For all Floors. 2.00 Nos 890.00

SMC sor Sanitary Items,Page no22,It No.

Providing & Fixing stainless steel recessed type Soap dish of approved make. Including providing & fixing

screws, washers, cutting & making good the walls.

Make- Cera, Parry ware, Jaquar ,HindWare

For all Floors. 2.00 Nos 793.00

SMC sor Sanitary Items,Page no21,It No.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110 mm diameter with jali of the

83 following nominal diameter of self cleaning design with C.I. scread down or hinged grating including the cost of

cutting and making good the walls.

All floor 5.00 558.36

SMC sor.Page no 8,It No.

SR. NO. DESCRIPTION QTY UNIT AMOUNT

PART (A) - CIVIL WORKS

Providing & Fixing U-PVC pipe (SWR) confirming to IS no. 13592 (Type "B") of Prince/ Supreme/ Jain/

84 Astral/ Tulsi/ Finolex make for soil and waste discharge system at all floor levels incl. All fixtures like bends,

tees, shoe etc. jointed with resin of approved brand & manufacture etc. comp. (M.R.)

SMC sor,Page no 8 It No. 84 M.R.

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A") of Prince/Supreme/Jain/Astral/

85 Tulsi/ Finolex make for rain water at all floor levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. (M.R.)

SMC sor ,Page no 8, It No. 85 M.R.

Providing & Fixing in position PVC Cowl vent to pipes of Prince/Supreme/Jain/Astral/Tulsi/Finolex make

SMC sor- Page no.8, It No.

Providing & Fixing Kathi around the vertical PVC drainage pipes for concealing with cement plaster 20 mm

avg thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as per instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 44.00 R.M 173.00

(B) 100 mm /110 mm PVC PIPE 44.00 R.M 180.00

SMC sor- Page no 8, It No. 93 MR

Providing, Laying and jointing on true line and level UPVC pipe (SCH-40) line of Prince/ Supreme/ Jain/

Astral/ Tulsi/ Finolex make including fittings make or equivalent as approved by angineer-in-charge. Pipe

88 shall be fixed on the wall the help of clamp at every two meter C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials.

SMC sor Page no 8 It No.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/ Astral/ Tulsi/Finolex make for water

supply line at all floor levels incl. fixtures like bends, tees, shoe etc joined with resin of approved brand &

89 manufacture etc. comp. Pipe shall be fixed on the wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

SMC sor Page no 8 It No. 87 MR

Providing and fixing M.S. holder bat clamps at all floor level,of approved design to C.I. or S.C.I pipes including

cost of cutting holes and making good the wall etc. comp. (M.R)

SMC sor- Page no 8, It No.

Providing & fixing Z - clamps at all floor levels of approved design to C.I. S.C.I. or PVC pipes including the cost

of cutting holes & making good the wall etc.

(C) 150 mm to 200 mm dia 0.00 NO 98.00

SMC sor- Page no 11, It No. 121 M.R.

92 Providing & Fixing gun metal check or non return full way wheel valve at all floors levels, etc. complete.

SMC sor Page no 8,It No.

93 Providing & Fixing abonite ball cock of approved qualities directed etc. comp.

SMC sor- Page no 8,It No.

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M. 1:1 of following nominal internal

diameters incl. Testing of pipes and joints etc. Comp.

SMC sor- Page no.7, It No.

SMC Storm drainage SOR 22-23, Page no1 It No.1

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M 1:5)chamber & water tight C.I. cover with

95 frame of 300mmx300mm size (inside) with weight includ. plastering smooth inside & outside 15mm. th' in

C.M.1:3 etc. comp. (i) Square mouth traps---(A) 100mm x 100mm Size -P type

SMC sor,Page no 7, It No. 73 2.00 Nos 1292.19

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension ,455 x 610 mm & 450 mm deep sewer

trap chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

96 inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 0.00 No. 3155.63

20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be not less than 38 kg. On top etc.

comp. for single pipe.

(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 1.00 No. 2904.47

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 222.71

SMC sor, Page no.7, It No.75

Providing & construction simple chamber of 23 cm. th' B.B. Masonary in C.M 1:5 with cement plaster

mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade

stone aggregate 20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with frame to be not less than

kg. On top etc. comp. Inside dimension,455 x 610 mm &450 mm deep for single pipe

(A).Same as above but Precast RCC heavy duty Cover instead of C.I. Cover 0.00 No. 2681.76

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 242.39

SMC sor - Page no7,It No.76

Providing and fixing C.I. manhole cover 0.60 mt. x 0.45 mt. size having weight not less than 35 kg. etc.

SMC sor- Page no.8, It No. 83 1.00 NO 958.17

99 Providing and fixing G.I, Rain water spout of 50 mm dia and 30 cm Length

SMC sor- Page no 6 It No. 64 10.00 NO 101.91

Providing & fixing white vitreous china urinal of size 450 x325mm as per IS-2556 (Part-2 ) with C.I.

100 hangers and 15mm dia. C.P. spreader,32mm dia CP bottle trap and pipe to wall with C.P. flange complete

including cutting and making good the walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-WHT 13261H ,HindWare BACK SMALL 60001 3.00 NO 2476.00

SMC SOR- Sanitary Items,Page no.21, It No.8

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Providing & fixing at all floor levels,both face polished machine cut edge (A) slab

urinal partition

101 joined with grey/White cement slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)( Basic Cost- Rs.

SMC sor- Page no7 It No. 66 MR 4.00 S.M 1050.00

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing, centering, vibrating, curing & mixed

with approved water proofing cement compound or "CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with 50 kg. cement bag shall be as recommended by the

manufacture of the water proofing material, concrete work for top, bottom slab & side pardi for Under ground

Tank & Item incl. Necessary excavation & refilling the available earth, 15 cm th' C.C 1:4:8 for bedding concrete,

Half B.M. in C.M. 1:4 outside wall, inside R.C.C. pardi as per design, 10mm.th. water proofing cement plaster in

C.M. 1:3 with smooth finishing,watering etc.Comp.to all inner face & bottom of tank curing etc. comp. incl.

Locking arrangement, outlet, inlet, overflow & wash out pipe arrangement as necessary & C.I. Cover 0.60 x

.045 weight not less then 35kg. etc. com. as per structural drawing excluding Steel & as directed by

Engineer in-charge

Under Ground water Tank 0.00 Lit 5.46

Providing & Laying white glazed tiles 6mm. th. of Orient, Kajaria, Jhonson,Nitco,Somani ,Bell make at all floor

103 levels, in flooring, treads of steps & landings laid on a bed of 12 mm. Av. Th.C.M.1:3(1cement :3 sand)

finished with flush pointing in white cement etc.com. For all floors

Under Ground water Tank 0.00 SM 857.42

SMC SOR, Page no4, It No.

Providing & Laying white glazed tiles 6mm. th. Of Orient, Kajaria, Jhonson,Nitco,Somani,Bell make at all floor

104 levels in skirting risers of steps & dado on 10 mm. th. C.M.1:3(1cement :3 sand) including necessary cement

paste for fixing and joined with white cement slurry etc. complete. For all floors

Under Ground water Tank 0.00 SM 887.64

SMC SOR, Page no4, It No.35

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C. work incl. bending, binding & placing in

position etc. comp. Upto G.L./P.L.

Upto G.L./P.L. 0.00 Kg. 76.21

SMC SOR- Page no1, It No.

Providing erecting and fixing double coated Sintex / Super / Reno PVC (ISI) mark water tank of required

capacity each with all necessary fittings & connection etc. complete on terrace.

SMC SOR- Page no 8, It No.

Total cost of Water supply & sanitation

(A) Total amount up to plinth

(A) Total amount up to plinth

(B) Total amount above Plinth

(B) Total amount above Plinth

(C) Total amount of water supply & sanitary

(C) Total amount of water supply & sanitary

TOTAL OF CIVIL WORK (A+B+C)

PART (B) - ELECTRICAL WORKS (PREPARED BY ZONE)

NOTE: For use of ZHFR/HRFR Copper wires in place of FRLS PVC wires add 5% in Item of Point wiring Item No 1-1-1 to 1-2-5 & 1-5-1 & 1-5-2.

Sr. Description of Work/ Item Qty Unit Rate Amount

PART 01: Internal Wiring

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC

1 / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate 169.00 Point 485.81 ₹

modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be

erected complete with earth continuity and necessary connection with primary light with accessories erected

on Metal / PVC / wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.as directed.as per

pipe erected with following type of accessories.

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with

6A Modular type switch and hum free EME step type electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete 12.00 Point 745.38 ₹

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

Cat-III. (ZFLR/HFFR)

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules

erected on / in wall / ceiling with following type accessories

Cat. III (ZFLR/HFFR)

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are

of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with

6A Modular type switches and following type of accessories erected on PVC / Metallic/Wooden box, single

6 mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling 8.00 Point 603.98 ₹

as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

SR. NO. DESCRIPTION QTY UNIT AMOUNT

PART (A) - CIVIL WORKS

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge. 4.00 Each 160.59 ₹

[A] For One Gang

(4) TV Co-axial Socket outlet

(5) Electronic hum Free steps EME Fan regulator

(7) Blank Plate Single

(8) Computer RJ-45 socket

(11) 6 Amps. Bell Push

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in

wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps

with following dia of pipes, in approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with

grooves, trunking of size not below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene ₹

11 not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size .

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with necessary end caps Internal and external bend, flat

12 bends, coupler, tee etc..All necessary accessories and measuring of following sizes

(1) 75 mm x 50 mm trucking

(3) 50 mm x 50 mm trunking 10.00 Mtr. 188.87 ₹

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size 125.00 Mtr. 112.11 ₹

(A) with medium class Rigid PVC pipe and accessories

13 (a) 2 wire 4 sq. mm

(b) 2 wire 6 sq. mm 25.00 Mtr. 147.46 ₹

(d) 3 wire 4 sq. mm 0.00 Mtr. 142.41 ₹

(e) 3 wire 6 sq. mm 0.00 Mtr. 200.99 ₹

(h) 4 wire 6 sq. mm 25.00 Mtr. 260.58 ₹

Providing and erecting Mains with ISI marked electrolyte stranded copper conductor, Non PVC Zero Halogen

free fire retardant insulated copper conductor, insulated wire (HRFR) conforms to IS-694, erected in existing

pipe with 1.5sq. mm copper conductor of same specifications for earth continuity of following size.

[c] 2 wire 1.5 sq.mm

[d] 2 wire 2.5 sq.mm 300.00 Mtr. 71.71 ₹

[f] 2 wire 6.0 sq.mm 75.00 Mtr. 140.39 ₹

[i] 3 wire 1.5 sq.mm 0.00 Mtr. 66.66 ₹

[j] 3 wire 2.5 sq.mm 0.00 Mtr. 102.01 ₹

[k] 3 wire 4.0 sq.mm 0.00 Mtr. 140.39 ₹

[o] 4 wire 4.0 sq.mm 0.00 Mtr. 190.89 ₹

providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 erected in existing pipe of following

size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required 10.00 Mtr. 91.91 ₹

size of copper lugs, nuts and bolts if required.

(f) One wire 10.00 sq. mm

(g) One wire 16.00 sq. mm 10.00 Mtr. 142.41 ₹

(h) One wire 25.00 sq. mm 0.00 Mtr. 236.34 ₹

(i) One wire 35.00 sq. mm 0.00 Mtr. 300.98 ₹

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in

two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for

telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs.

16 With necessary connections. 300.00 Mtr. 20.20 ₹

[A] Conductor Size 0.5 mm

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard

18 approved with krone strips 1.00 Each 1747.30 ₹

(c) Suitable for 50 pair

Subtotal Part-01 ₹

Part-02: Light Fixtures

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

(Fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

SR. NO. DESCRIPTION QTY UNIT AMOUNT

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet PART (A) - CIVIL WORKS

Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, minimum

burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27 /

B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser suitable LAMP holder.

(ii) 5 to 8 watts

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser

housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 % 1.00 Each 220.18 ₹

22 ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded

mounting clips complete.IP20

(i) 5-9 watts,Surge-2 KV

(ii) 11-15 watts, Surge-2 KV, CAT- III 0.00 Each 427.23 ₹

(iii) 16-20 watts, Surge-2 K , CAT- III 2.00 Each 589.84 ₹

(B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing

23 complete.IP20 40.00 Each 1794.77 ₹

(vi) 36 watts, 24" x 24", Surge- 2KV, CAT: III

24 (vii) from 45 to 48 watts, 24" x 24", Surge-2 KV 4.00 Each 2091.71 ₹

Subtotal Part-02 ₹

Part-03 LT Switchgear, Distribution Boards & LT Panel

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU

of 35 KA. and above at 415 V . having normal current rating 250A. with variable thermal & magnetic release

25 suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only. Cat III 0.00 Each 20946.39 ₹

Supplying & erecting approved make Four Pole 415V change over switch interior for panel mounting with

26 operating mechanism A.C.23 duty confirming to IS for 1.00 Each 13353.21 ₹

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 G.M.S. sheet, dust & vermin

proof having hinged door with rubber gasket and necessary busbar supports with COPPER busbar having

current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with ₹

27 colour insulation tape for phase sequence, three phase & neutral each suitable for following current capacity

with necessary painting mounted on wall or pedestal frame of required size with necessary connections.

(B) Suitable for 200 Amp. capacity 1.00 Mtr. 5731.75 ₹

(C) Suitable for 300 Amp. capacity 0.00 Mtr. 8539.55 ₹

Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing box having following capacity

(A) 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having following capacity

(a) 6 to 32 Amp.

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket, company

31 fabricated powder coated sheet steel enclosure erected as directed with connection. 1.00 Each 660.54 ₹

[B] 15 Amp. / 5 Amp. Five pin Universal Socket- CAT III.

Supplying & erecting approved make Electronics Starter and relay for air conditioners in ABS plastic moulded

housing. Company fabricated with bakelite terminal for connection with silver coating bimetallic contact in

switching device for o/p with following features.

(1) Low Voltage Protection below 130 V

(2) High Voltage protection above 270 V

(3) Overload protection for 2-5, 4-10, 8-14, 10-16, 14-22 Amp. (inverse time chara-)

(4) Indicating LEDs for AC on LV, HV, O/L, T/D

(5) With unique feature of 3 minute of time delay

33 Plastic enclosure fitted with DIN rail suitable for incorporating One / Two nos. MCB 1.00 Each 52.52 ₹

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43)

(iii)8 way 1.00 Each 1152.41 ₹

(A) single phase incoming and horizontal single phase outgoing

(a) single door (IP-30) 1.00 Each 867.59 ₹

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(a) sheet steel single door

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI)

(a) sheet steel single door

(iv)12 way 4.00 Each 3125.95 ₹

Providing and erecting approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and

Short Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do not incorporate any electronic 4.00 Each 1969.50 ₹

35 component. for following Max. rating erected as directed

(i) 25 Amps.DP, Cat-III

(ii) 40Amps. DP, Cat-III 2.00 Each 2235.13 ₹

SR. NO. DESCRIPTION QTY UNIT AMOUNT

(iii) 63 Amps. DP, Cat-III PART (A) - CIVIL WORKS 1.00 Each 2654.28 ₹

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge

for MEDIUM VOLTAGE installation to be erected as per IS-2551.

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge

for HIGH VOLTAGE installation to be erected as per IS.-2551.

Providing & erecting Medium Voltage Danger Notice Board sticker as per language suggested by engineer

incharge of standard size as per IS-2551

Providing & erecting High Voltage Danger Notice Board sticker as per language suggested by engineer

incharge of standard size-as per IS

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly

painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary

grouting, cementing, plastering & finishing complete.

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated outdoor type double

door cubical panel board necessary IP-54 and above protection as per approval from engineer incharge made

from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions

with necessary accesories , supporting angles/ flats channel including cutting, bending, drilling, welding,

riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with

supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts,

41 foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and 0.00 Sq. mt. 16323.62 ₹

rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips,

meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with

following approved manufacturers with following size.

(B) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory

(i) with 350mm depth

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED display,

42 to 750 AC Volts range erected on existing panel board with all connection, wiring etc .with manufacturers 1.00 Each 1275.63 ₹

calibration certificate.

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display,

43 external CT operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing 1.00 Each 1558.43 ₹

panel board with all connection, wiring etc .with manufacturers calibration certificate.

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on existing panel

board with necessary connections.

Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, complete erected

with necessary connections.

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected

in existing CRCA box duly secured with insulating materials connected to the meter

Providing and erecting following additional parts for panel mounting MCCBs

47 (A) Extended operating rotary handle with pad lock with three position trip,off,on suitable for 25A to 250 A 1.00 Each 873.65 ₹

panel mounting cat-III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU

of 35 KA. at 415 V. having normal current rating 125A. with Fixed thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing.

ICS=100% of ICU only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU

of 35 KA. and above at 415 V . having normal current rating 250A. with variable thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only

*Add 35% additional for microprocessor type of mccb in place of conventional for item no.3-4-1 to 3-4-12

Subtotal Part-03 ₹

PART 04: Earthing System

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T., OCB/ ACB/

Transformer LT panel board, Motors etc. using proper clamp.

51 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 20.00 Kgs 794.87 ₹

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting

Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe

dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for following type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in

test Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm

/ meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test

report must be submitted by Agency.

(b)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs 10.00 No. 5760.03 ₹

Back filling Compound :1 no. Bag of 25 Kg.

(c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive

Computer System(like Automation, SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt

trip 220V AC. with all internal connections & complete erected in existing M.S.housing..

Subtotal Part-04 ₹

PART 05: LT Cables & Cable Termination

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor

55 for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 50.00 Mtr. 126.25 ₹

(B) 4 core 6 Sq. Mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for

KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 25.00 Mtr. 490.86 ₹

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core)

(A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) 5.00 Mtr. 183.82 ₹

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) 0.00 Mtr. 904.96 ₹

SR. NO. DESCRIPTION QTY UNIT AMOUNT

PART (A) - CIVIL WORKS

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for

57 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables 15.00 Mtr. 153.52 ₹

(A) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size

(A) 3 core 2.5Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for

KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following

size of cables.

(C) 4 core 6 Sq. mm

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run

and back filling the same and making the surface as normal ground.

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing or on

61 floor with necessary material in an approved manner and making the ground as per original. 20.00 Mtr. 263.61 ₹

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same material at required depth in existing trench for

62 laying of cable. below ground / road surface for enclosing cable

(A)50 mm outer dia

(C))90 mm outer dia 10.00 Mtr. 95.95 ₹

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating tape etc for following size of cables.

(C) 2 to 4 core 10 Sq. mm 4.00 Each 38.38 ₹

(D) 2 to 4 core 16 Sq. mm 4.00 Each 47.47 ₹

(E) 2 to 4 core 25 Sq. mm 0.00 Each 51.51 ₹

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped

with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an

approved manner.

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for

PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.

66 Supplying and erecting nuwood 12 mm thick on existing angle iron frame. 2.00 Sq. mt. 291.89 ₹

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable

approved make of following Size. 100.00 Mtr. 104.03 ₹

(B) 3 Core x 2.5 Sq. mm.

(C) 3 Core x 4 Sq. mm 50.00 Mtr. 146.45 ₹

Supplying rubber matting of following thickness as per IS:15652/IEC

Subtotal Part-05 ₹

PART 06: Fan & Related Accessories

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark

69 with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades with , 12.00 Each 1948.29 ₹

canopy & 30 cms. down rod erected with earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for

fan complete with proper insulation without leckage and earthing.

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring

mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM 8.00 Each 2740.13 ₹

[B] 380 mm dia 900 RPM, Cat II

[D] 450 mm dia and 900 RPM. Cat.II 8.00 Each 3339.06 ₹

72 Providing suitable M.S. louver shutter of the Exhaust fan. 16.00 Each 368.65 ₹

Supplying and erecting approved make double ball bearing oscillating type Heavy duty bracket fan with

Aluminium Blades A.C. 23OV. 50cy/s wall mounted with height adjustment and rotary tilting device complete

with guard, wall bracket,mounting accessories as directed.

Subtotal Part-06 ₹

PART 07: Motor & Starters

Supplying and erecting Direct-on-line, Starter with 15A.rating contractor and with 4-14A. range, directly

operated thermal overload relay in sheet steel enclosure for 3phase 415V.50 c/s. A.C. motor up to

H.P.complete erected on P.W. Block with necessary connection.

Providing & erecting open well horizontal mono block pump set with cast iron body, complete for three phase

submersible motor having

[D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 10 to

75 42 Mtr head suitable for 50/65 mm dia delivery pipe cat III

[B] For 2 HP 3 phase open well horizontal mono block pump set suitable for 200 LPM @ 25 mtr head

suitable for 50 mm dia delivery pipe. 1.00 Each 10734.28 ₹

Supplying & erecting approved make Automatic liquid level controller 6A. with sensor testing as per

76 instruction of Engineer in charge on site complete with wiring connection with existing wires , with copper 1.00 Each 2355.32 ₹

conductor from pump to upper and lower tank.

Supplying & erecting approved make motor control cubical panel (Direct - on - line) made from 16 G. CRCA

sheet duly epoxy powder painted inside and outside with hinged doors and locking, arrangement consisting of

suitable size of ON- OFF isolator (AC - 3/23duty) main fuses, single phasing preventer, indicating lamps for R-

Y - B phases, overload relay, Automatic water level controller, Ammeter, Voltmeter each with two way selector

switch incoming, wires duly socket crimped, main contactor & overload relay, start - stop push buttons, to be

erected on angle iron frame grouted on wall as directed. The isolator, overload relay & contactors will be of L

& T, Siemens or BCH make only.

(a) DOL up to 5.0 H.P.

Subtotal Part-07 ₹

Part-08: Cable Trays

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray

should be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip

galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware

like nut - bolt and washers etc. erection with necessary support( included) as per Specification and as per

78 instruction of engineer in charge..

(1) 50 X 50 X 1.6 mm Thick

SR. NO. DESCRIPTION QTY UNIT AMOUNT

Providing and fixing approved make 'T' Junction for Perforated C type PART (A) - Made

cable tray. CIVIL from

WORKSsheet steel. The

Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and

washers etc. erected on existing support as per Specification and as per instruction of engineer in charge of

79 following size

(1) 50 X 50 X 1.6 mm Thick '

Providing and fixing approved make '90° Elbow' for Perforated C type cable tray. Made from sheet steel. The

Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS

2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on 0.00 Ea. 98.98 ₹

existing support as per Specification and as per instruction of engineer in charge..

(1) 50 X 50 X 1.6 mm Thick 90° Elbow

Subtotal Part-08 ₹

PART 09: Water Coolers & Purifire

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an

ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚C within a hour, The water cooler

81 should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded 1.00 Nos. 55893.40 ₹

by evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet connection. The body of

water cooler will be made from Stainless Steel.

Supplying and erecting water filter cum purifier with ultra violate technology. (Aquaguard / waterdoc model

or equivalent symphony/ crystal/videocon model)

Subtotal Part-09 ₹

PART 10: Liasioning Work:

Charges for doing liasioning work for obtaining the necessary clearances from the Electrical inspector /

competent Authorities for the total Electrical installation, Elevator Inspection,co-ordinating with various

agencies. All necessary Working drawings, calculations, load calculaiton, test certificates, etc. as required by

these authorities shall be prepared and furnished by the EPC Vendor. Any modification/rectification as

required by these authorities shall be carried out by the EPC Vendor at free of cost. The fees required to be

paid to these authorities for inspection shall be borne by Owner on production of documentary evidences.

Subtotal Part-10 ₹

PART 11: Lift Work:

(a) General Features & Special Features of the all lift items shall be taken as below.

(b) for Handicap Lifts, Minimum 10 Passengers Lift Capacity shall be considered.same is to be informed to

architect /civil authority to keep necessary size of lift well.

(c) The lifts of 15/ 16 and above passenger capacity shall be taken for Hospital Lifts; Where in Description “

Stretcher Lifts” shall be mentioned.

(d) The Rates of the following items are for the lift of Machine room less. For Machine room Lifts, rate for Rs.

1,50,000/- shall be deducted in Total Cost for the Lifts from 4 to 13 Passenger Lift. Rs. 2,00,000/- shall be

deducted in Total Cost for the Lifts 15 and above passenger capacity as extra cost.

(e) Add Rs. 80,000/- for the DUPLEX control for the lifts up to 10 floors and add Rs. 10,000/- for additional

each floor above 10 floors.

(A) GENERAL DESCRIPTION OF LIFTS.

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent

Magnet Synchronous motor of proper rating with high efficiency shall be used.

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall be provided.

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall be provided in control panel.

[14] Mechanical over speed governor with governor calibration as per actual site parameters and submission

of calibration certificate submission, door key holes in the floor doors, fireman switch shall be provided.

[15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should be

provided by the lift agency, along with the other steel structure works, foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra cost, where ever required as / if directed

by engineer in charge.

[17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage Under Voltage

protection and THD eliminator in circuit for lift machine room and lift well with proper numbers of light

points, with fixtures, exhaust fan and plug points shall be provided by the agency. Only 3 phase Power Supply

shall be made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules shall be

arranged by Lift Agency.

[18] Any civil/ electrical works for additional and alteration in lift shaft and machine room related to erection

of lift shall be made by lift agency without any extra cost. (granite/marble fixing around all landing door

openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and liaison services for obtaining all

necessary permission from lift inspector and other authorities. [20] acrylic transparent licence/display A4

size holder in lift car

[20A] As per statutory requirement of Govt. Of Gujarat lift & escalator act 2000, lift agency has to provide

1. Car top safety barricade

2. Push & talk communication system.

3. Fireman's switch operation at Ground Floor. 4.carrying out third party

lift inspection during/after lift erection and provide report by third party authorized by concern licensing

authority 5.agency has to provide third party insurance upto completion of free maintenance period and

submit the document for the same.

[21] Car Panel Operating Buttons with floor position indicator/buttons must be of Auto Glow type clearly

visible when view from inside cabin.

[22] For Physically Handicapped person Full Length Handrails of hairline finish steel grade of 304 should be

provided at appropriate height on the Rear & Side Wall Panels in Lift Car. [23] With Necessary KVA rating

voltage controlled Stabilizer suitable for your controller, drive and all equipments of lift.

[24] Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is sugested by

CEICED Department (electrical Inspector)

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category

SR. NO. DESCRIPTION QTY UNIT AMOUNT

PART (A) - CIVIL WORKS

1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial Communication mode

including Regenerative power efficient operation,on site programming facility, Anti nuisance, Pte-opening,

BMS/RMS with necessary online real time monitoring system having necessary connectivity for remote

monitoring & other suitable supporting hardware & software devices to fulfil the purpose.

2. Floor Indication LCD Display with call registration & brail mark with arrival gong and hall lantern & TFT

Screen in the car with MP3 Voice Announcer.

3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb for car and all Doors,

All landing doors must have fire rating up to 2 hours and car door must have multi-level crisscross beam door

4. To & fro communication system & wiring (i.e. car , control room & guard room ) and Each elevator are

equipped with remote monitoring system.agency has to provide mobile app and user id and password for

DESCRIPTION OF LIFT :

Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having following main features:

26 passengers . Ground plus 2 upper floors with Rated Speed of 1.0 m/sec with micro price/PLC 1.00 Nos. 1911966.36 ₹

control and ACVVVF. drive

(B) With General Specification attached herewith. Cat.III

Supplying & erecting approved make Lift Announcing solid state system in the Passenger/ Stretcher lifts

having AC2/ACVV/ACVF drives & automatic doors only. The system comprising following features &

(i) Announcing floor message, message to close period.(ii) Announcing ‘Emergency Message’ when lift is stuck

85 between floors due to power failure or any other reason. 1.00 Nos. 17119.50 ₹

(iii) Instrumental Music between floor announcing.(iv) Announcement in English / Hindi & Gujarati

(v) Flexible to accommodate special per-programmed message such as name of the building /office.(vi)Volume

adjustment control

Providing & erecting approved make overload non-start feature & overload warning Indicator system in the

lift with making use of sound isolated floating platform & micro switches on SI frame to get sensation of live

load inside lift cage at any given moment, with provides new fixtures of overload warning inside lift cage with

new relay in the existing control panel to activate ‘Overload Non-Start Function with carrying out additional

wiring including laying of new travelling cable, include minor civil work & without changing the existing

capacity speed stops, travel & operation of the desired lift

Subtotal Part-11 ₹

PART 12: Air Conditioner

Providing and erecting approved make split air-conditioning unit consisting of copper condensing unit with

fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected

evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper

87 tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, Eco Friendly green gas charging, 15A 2.00 Nos. 46288.30 ₹

plug top & Remote Control) with necessary core cutting.

(1)For ISEER Range (KWH/KWH)(3.1 to 3.99)

(c) for 2 ton capacity

88 [a] For 1 Ton Capacity 1.00 Nos. 30713.09 ₹

SETC of Indoor(Chilling) Units, Outdoor Units, PIR Insulation Powder Coated GI Sheets, XLPE Cables & FRLS

Wires MCB / MCCB, Required LED light Fixures and modular accessories with necessary Major / Minor civil

works at Cold Storage.

Cold Storage Room Size :-

(Internal dimention) : 5.736 Mtr (W) x 4.102 Mtr (L) x 3.000 Mtr (H)

Calculated Heat Load :- In the Scope of Contractor ( Consideration: Max. no. of specific usage with medicines

and ambient temperature = 50º Deg Celsius )

Required AC Units:- One Working + One Standby (100% Standby),

Temperature inside Cold Room required :- 2º C to 8º C,

Temperature Hold time :- 4 Hours in full load condition of Cold Room,

Thickness of insulation & Lamination:- Pre fabricated modular PIR (Poly Iso Cynurate) / panels min 100 mm

Pre painted powders coated on both sides with sheet thickness of 0.5 mm. GI Sheet shall be of Tata /Jindal

Floor :- min 100 mm thick PIR (Poly Iso Cynurate) panel with upper layer of 3 mm thick GI checkered plate

(fixed on ply) PIR shall be of Bakelite / Asawa Only.

Door Size and Type :- 100 mm thick PIR-Flush in type swing door - one / two numbers, adequate for

comfortable entry/exit main door width 2.5 feet.,

Pull Down Time:- 12 Hours Max,

89 Indicaters & Protection:- Outside the Cold Room : Temperature indicator, Controller & HP/LP protection &

Internal lighting :- 4 nos. of 20 W LED fittings with IP 65. Fittings shall be of Philips / Schreder / Osram / Cree

/ Wipro / Bajaj / Havells Only.

Alarm(Hooter) :- Against High Temperature (settable),

Indoor unit Construction:- SS (Stailess Steel) Certificates required :-

1. Manufacturer of Indoor and Outdoor units.

2.PIR Panel Manufacturer Quality Certificate.

Vendors for Chilling Units:- Bluestar / Hitachi / Carrier / DAIKIN / Mitshubishi / Voltas / Rinac/ Sanyo / Lloyd

MCB/MCCB/DB :- System shall be compatible with 415 V, 3 ph, 50 Hz Supply. MCB / MCCB / DB shall be

Siemens / MDS /L&T / MG / Indokorp / Schneider / Hager / Havells /ABB / C&S / Legrand Only.

Cable / Wire:- Work shall be including with cable from Panel /Supply to Cold room and internal wiring/cabling

/ switch & accessories.

XLPE Cable :- CCI / Universal / Finolex / Incab / Torrent / Havells / Bharatcab / Gloster / Avocab / RR.

FRLS Wires:- RR / Finolex / Havells /Anchor / L & T / Polycab.

Modular Switch :- Anchor / Pointer /Crabtree / Havells.

Note :- Rate shall be included of :-

1.Every type of freight / transportation / loading / unloading / insurance / packaging / forwarding / watch

and ward of material.

2.Supply/Erection/Testing/Commissioning.

3.Any alteration in civil work.

Subtotal Part-12 ₹

PART 13: Generating Sets

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 &

BS:5514 having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed

air/water cooled diesel engine with multi-cylinders developing suitable BHP not less than following capacity

at 1500 RPM with 10% overload for one hour in 24 hours with standard accessories like fly wheel, lubricating

oil cooler, "A" class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil

pressure gauge, end exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder

head to cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric starting equipment

complete with standard heavy duty battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge,

starter etc and heavy duty Residential type exhaust silencer (With DEF System) and vertical hot air duct both

SR. NO. DESCRIPTION QTY UNIT AMOUNT

PART (A) - CIVIL WORKS

logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor mounted fuel

with level indicator and piping and drip proof alternator, self excited, self regulated, screen protected, with

excitation system, capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire,

running at 1500 RPM, conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated voltage from no

load to full load. Both the engine and alternator fitted on a common fabricated steel base plate with

90 antivibration mounting engine and alternator both connected to each other by flexible flange coupling and

with floor/wall mounted control panel box comprising of voltmeter ammeter, selector switches, ACB / MCCB

/ MCB of adequate capacity,

indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with provided

suitable capacity armoured cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA

Sheet, sound absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of

40 Density - at least 40 mm. The resin bonded rockwool covered from inside the canopy by perforated sheet

with 3/4 mm holes, sound level not more than 75 dB at a distance of 1 mtr, as per PVCT norms.DG set should

have in built fuel tank capacity of minimum 8 hrs of continous running capacity on full load . Erection,

commissioning and satisfactory testing as per requirement with first filling of fuel (minimum up to the 80% of

fuel tank capacity), oil, etc. with guarantee / Warrantee of complete system for Two years. & with obtaining all

necessary certificate from Electrical Inspector. The Capacity and Ratings of DG sets are as below. (As per new

CPCB4+ Emission norms Engine With - Turbo Charger, EGR (Exhaust Gas Recirculation), CRS (Common Rail

Fuel System), DOC (Diesel Oxidation Catalyst), SCR (Selective Catalytic Reduction), Integrated wiring harness

connected to ECU .)

(H) Continuous Rating of 50 KVA ,BHP not less than 65.8 BHP 1.00 Nos. 654382.03 ₹

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V.,

cycles, A.C. diesel generating set complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for mains & generator) Overload

relay for generator contactor Neutral contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt

start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual

switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two

earthing studs.

3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head

temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery charger.

The AMF Panel of following capacity

(A) AMF Control Panel for 50/62.5 KVA 3 phase DG Set 1.00 Nos. 97320.57 ₹

Subtotal Part-13 ₹

PART 14: ELV SYSTEM

SITC of Digital / PCM / TDM EPABX System having SMT design, system with flexible universal slots. Inbuilt

Auto attendant facility, Minimum 15 Nos. conference, Analog extension line, Calling GSM, E&M line, PRI / EI &

Providing and erecting Standard Push button telephone (DTMF) Phones [[Approved by Competent Authority

i.e. not Below the rank of Executive Engineer ]

Supplying & erecting push button type telephone instrument having speaker phone Caller ID & hands free

94 dialing system & 30 memories with display system Single line [[Approved by Competent Authority i.e. not 1.00 Nos. 565.60 ₹

Below the rank of Executive Engineer ]

Subtotal Part-14 ₹

TOTAL AMOUNT OF ELECTRICAL WORK ₹

TOTAL AMOUNT OF ELECTRICAL WORK ₹

PART (C) - Furniture work

DESCRIPTION Qty. UNIT AMOUNT

Providing & fixing L- type table (Size:- 1.800m x 1.600m x 1.050m) with table top would be 38mm

thick, made out 18mm Commercial Plywood. All outer surfaces to be finished using 1mm thick laminate and

bottom surface to be finished with 1mm thick laminate as approved by architect.The vertical support of

table would be 18mm thick Commercial Plywood. The surface would be finished using 1mm thick

laminate as approved by architect. Front of the table is made using 18mm thick Commercial Plywood.

It should have 2 nos. of drawer units made out of 12mm thick Waterproof Commercial Plywood on all

side &12 mm thick Commercial Plywood at bottom. It should have 2 shutters made out 18mm thick

Commercial Plywood. All Exterior surfaces of the table would be finished in 1mm thick laminate & all internal

surfaces would be finished with 1mm thick laminate as approved by architect. including all necessary

hardware & fittings like screw, lock, drawer channel, handle, key board tray, cable manager etc.

completed as per architect drawing & Instructed By Site Engineer. Commercial Plywood Make-

(Echotech, Century, Green), Laminate Make- (Century, Green, Royal Touch). (DWG No. ID/05)

As per SEZ TP.62, FP. R-19Reading Room 2.00 Nos 43,727.00

Storage Unit with table top would be 38mm thick, made out 18mm Commercial Plywood, central

partition of 18mm. 20mm thick shutters made with 18 mm thick, back side surface of the unit is to be made

with 12 mm thick , the outer surfaces would be finished using 1mm thick laminate and all internal surfaces

would be finished using 1mm thick laminate as approved by architect. Storage unit as per

measurement from drawer and shutter side, including all necessary premium quality hardware &

fittings like screw,bonding material, lock, drawer channel, handle,magnets, chain etc. completed as

per architect’s drawing & Instructed By Site Engineer. Commercial Plywood Make- (Echotech,

Century, Green), Laminate Make- (Century, Green, Royal Touch). (DWG No. ID/04)

As per SEZ TP.62, FP. R-19 Reading Room 2.70 SQM 27,819.00

Providing & Fixing table (size:- 2.400m x 1.200m x 0.750m) with table top 18mm thick Commercial

Plywood with 1.0mm thick lamination sheet fitting with Ghana Beading Patti. Vertical support should be

made by Commercial Plywood & Ghanna Beading Patti with french polish labour work with nessasary

hardware etc. completed as per site in charge instruction and as per details drawing. Commercial

Plywood Make- (Echotech, Century, Green), Laminate Make- (Century, Green, Royal Touch). (DWG No.

As per SEZ TP.62, FP. R-19Reading Room 14.40 SQM 8,074.00

Providing of Other PVC Plastic Chair Length (47 cm), Width (51 cm), Height (89 cm) PVC Standard Brand

chair as per directed by Architect/Engineer - in - charge

As per SEZ TP.62, FP. R-19Reading Room 50.00 No 870.00

PVC Chairs Providing and fixing PVC Arm Chairs having Premium Matt Finish with soft feel texture

finish, having Size: 600 mm D * 560 mm W * 885 mm H, as per the Specified Company of HOF, Feather

Light, Wipro, Godrej, Neelkamal, Supreme etc.as per selection and complete the work satisfactorily as per

instruction of architect or Engineer-in charge

As per SEZ TP.62, FP. R-19 Reading Room 50.00 No 1500.00

Providing and fixing of soft board of size 1 x 1.8 Quartet White Frame Cork Board, Bulletin Display Board, Pin

Board, Lightweight Board for offices with backing of wood with complete installation and mounting with other

hardwares, waste of materials etc and complete the work satisfactorily as per instruction of architect or

Engineer-in charge.

As per TP.22, FP.81 Reading Room 7.20 SM 2424.00

Providing and fixing 2-seater LINK CHAIR with moulded foam, seat in 304 stainless steel beam: cold rolled

7 steel arm & leg:304 stainless steel of brand as per architects selection,and complete the work satisfactorily as

per instruction of architect or Engineer-in charge.

As per TP.22, FP.81 Reading Room 2.00 No 8700

METAL RACKS : Providing and fixing of storage rack of angle slotted type of size 78” x 36” x 18” with

8 shelfs(20 swg) ,including all hardware,colours, channels, etc.and complete the work satisfactorily as per

instruction of architect or Engineer-in charge.

SR. NO. DESCRIPTION QTY UNIT AMOUNT

As per Approved Rate in EZ-A April-2025 PART (A) - CIVIL WORKS 32.00 No 3500.00

Providing & making wooden partition using 08 mm thick commercial plywood with 01 mm thick laminate, 3"

Ö 1" size teakwood frame, 3" Ö 0.5" molding patti, 08 mm clear glass & necessary hardware material etc.,

9 french polish finish complete respected by drawing & engineer-in-charge.( Plywood- Saras, Kitply, Uniply,

Anchor, Green, Wood Stock, Everest, Euro or Century), (Laminate - Green Laminates, Century, New Mica

make) (Size H 5'-0" x W 4'-0")

As per Approved Rate in EZ-A April-2025 5.00 Sq. ft 450.00

Proving and Fixing of 2mm TK S.S 316 grade matt finish Name Plate with cut work and fixing 3mm

acrylic on top or behind of brand Pt glass, astari etc, with all laser and cnc work and wooden finish back

10 board including all meterial, Scaffolding labour, 15mm SS Studs for mounting and other hardwares,

waste of materials etc and complete the work satifactorily as per instruction of architect of Engineer in

charge. (BASIC SIZE OF NAME PLATE 150mm X 900mm)

As per Approved Rates of Ward office TP 03 FP-

M/03 (Gotalawadi) NZ Katargaam

Providing & fixing Powder Coated Aluminium partly glazed and partly panelled partition using medium duty

sections of Hindalco,Zindal, Narmada, Banco or Equivalent approved make having section 63.50 mm x

38.10mm ( Frame-.758 kg/rmt & Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick clear float

11 glass of approved make including all other necessary fittings and fixtures. Entire work will have to be made

water proof using necessary rubber sectioned wherever required. Gaps all round the frame to be filled with

approved water proof sealent. Bottom portion of doors both side to be covered with 12mm thick

prelaminated particle board of approved make and quality and as per design.

(A) Same as above but Colour anodized 78.300 SM 2400.00

Providing & fixing partly panel & partly glass Powder Coated Aluminium doors with aluminium section of

Hindalco, Jindal , Narmada,Banco or Equivalent approved make having Poder Coated outer frame Leg Partition

section of 63.50 mm x 38.10 mm having weight 1.158 kg. / R.M. shutter section having size 83.5 mm x

44.45mm ( top & bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm (

vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), Glazing Clip (Jindal Section No. 19370 Wt. 0.109 Kg./

Mt.) with 5mm thick sheet glass in acid frogting and 12 mm thick prelaminated sheet of Greenlam, Panama or

archid make as approved by Engineer-in-charge including fixing brass pivot, handle, lock etc.complete.

(A) Same as above but Colour anodized 15.000 SM 3237.00

Plain Gypsum Sheet Ceiling: Providing and fixing of Plain Gypsum Sheet Ceiling using 80 mm. x 26 mm. x

0.50 mm. thick g. i. Ceiling Sections, 15 mm. x 45 mm. x 15 mm. x 0.90 mm. thick Intermediate Channels,

mm. x 28 mm. x 30 mm. x 0.50 mm. thick Perimeter Channels and 25 mm. x 10 mm. x 0.50 mm thick Ceiling

Angles, as per IS 513 & 150 GSM Galvanised finish as per IS 277, including 8 mm Dia. 45 mm long, Zinc coated,

CR1 grade Rawl Plugs, 27 mm x 37 mm x 25 mm x 1.60 mm thick Soffit Cleats, 2.64 mm Dia. High Carbon

Spring Steel Wire Connecting Clip, confirming to IS 513, 12.50 mm Th. Tapered Edge Gypsum Board Plain,

conforming to IS 2095- Part 1: 2011 Certified Boards, Screw Fixed to Ceiling Sections, using 25 mm Drywall

Screws [material-carbon steel EN-ISO 7049/50, finish-case hardened Grey Phosphating] at 230 mm c/c on

Ceiling Sections & 150 mm at Periphery of Ceiling. Square and tapered Edges of the boards shall be jointed and

finished so as to have a flush look, including filling and finishing with Jointing Compound, conforming to ASTM

C475, & Joint Paper Tape etc. complete with all Material, Labour with all Lead, Lift and Transport and complete

the work satisfactorily as per instruction of Architect & Engineer-in charge, as per "Architecture" detail.

As per Approved Rates of New ED-1 (Hospital Block) of SMIMER Campus

Grid Ceiling: Providing and fixing in True Horizontal level 600 mm. x 600 mm. false ceiling in 24 mm C.B Grid

system manufactured by GYPTECH or Eq. Brand using hot dipped galvanized steel Section, Exposed Surface

with pre coated capping, Main Tee of size 24 mm x 32 mm., having 0.30 mm Gauge at every 1200 mm Center

to Center Maximum and Rotary Stitched Cross Tee of size 24 mm x 26 mm, having 0.30 mm Gauge at every

600 mm. c/c. and Sub Cross Tee of size 24 mm x 26 mm, having 0.30 mm Gauge at 1200 mm c/c. and wall

angle of size 24 mm x 24 mm., having 0.40 mm Gauge fixed to the periphery of the wall. The above grid is

14 suspended with 50 x 50 x 2 m thk. Jindal or Eq. make Aluminium Angle fix with necessary Anchor Fastner on 92.00 SM 1600.00

Slab Bottom Longer Span with Accessories such as Nuts, Bolts, Washer, Fastners etc. in both directions.

Gyptech Vinyl Laminated Gypsum Panel Square Edge Ceiling tiles manufactured by GYPTECH or Eq. Make, of

size 595 mm x 595 mm x 12 mm thermal conductivity k = 0.16 W/m.K, having Moisture Resistance & Fire

Protection, having lighter, smoother and more uniform Texture shall be laid evenly. The vinyl finish on the

Gypsum panels Seals out Moisture, Bacteria, Dirt and Odors. Lay in the modulus for the flush look incl. All

Materails, Labour, Scaffolding, etc. complete as per instructions of Architect..

As per Approved Rates of New ED-1 (Hospital Block) of SMIMER Campus

TOTAL AMOUNT OF FURNITURE WORK

TOTAL AMOUNT OF FURNITURE WORK

(A) TOTAL AMOUNT OF CIVIL WORK

(A) TOTAL AMOUNT OF CIVIL WORK

(B) TOTAL AMOUNT OF ELECTRICAL WORK

(B) TOTAL AMOUNT OF ELECTRICAL WORK

(C) TOTAL AMOUNT OF FURNITURE WORK

(C) TOTAL AMOUNT OF FURNITURE WORK

Executive Engineer

East (Varachaa) Zone-A

Signature of the Contractor: Surat Municipal Corporation.