NABARAD RIDF XXVI CONSTRUCTION OF 3 TISSUE CULTURE LABORATORIES IN KERALA- CONSTRUCTION OF NEW TISSUE CULTURE LAB AT DISTRICT AGRICULTURE FARM D A F AT CHUNGATHARA MALAPPURAM DISTRICT SUPPLY INSTALLATION OF MACHINERIES RETENDER

Laminar air flow cabinet unit : Supplying Installation Testing and commissioning of horizontal airflow work table size 180cmx 60cm x60cm , ss304, class100, vobration free blower, provided with illumination and uv light, front door folding type, fitted with glass bead steriliser one each at both side end of the work bench, seperate switches for blower, light and steriliser. wheels with heavy duty caster wheels. noise level less than 65 db.The supply wire should have sufficient length from switch board to equipment(monarch,natsteel)

Horizontal autoclave : Testing and commissioning of Horizontalautoclave with rectangular inner chamber ss316 , thickness 6mm or more, outer jacket ss 304, chamber dimension60cm width, 60cm height, 120cm depth. One side opening door.Steriliser with copper senser, steam ejector system, pmeumatically operated On/ Off valve to control steam and water. Automatic control system to facilitate smooth operation of autoclave.Three phase power operated with all necessary safety controls. suitable loading trolly with safety lock system. while loading,2 nos of carriages to load five layers of jars with 10cm height with suitable side guard and carrieages two each also to be supplied.

Vertical autoclave(electrical) : Supplying, Installation, Testing and commissioning of vertical autoclave with inner chamber dia55cm and depth 75cm mde of ss316 or better quality single phase operation with digital temperature indicator and timer pressure indicator, safety valves, steam release valve,drain valves, 15 psi with lid lifting and foot lifting mechanism, outer chamber with SS304, basket with perforated stailess steel and supply with 220-230 volt AC.suitable unloading/lifting system also shall be supplied along wirh.

Electronic balance 1 mg precision : Supplying, Installation, Testing and commissioning 1 mg 4 digit sensitvity electronic balance, weighing range up to 200gm(approx), pan size 100mmx100mm or nearest with LCD display, aC adapter, protective covering and response time less than 5 sec( or better specification)

Electronic balance 100 mg precision: Supplying, Installation, Testing and commissioning 100 mg 4 digit sensitvity electronic balance, weighing range up to 1000gm(approx), pan size 120mmx120mm or nearest with LCD display, aC adapter, protective covering and response time less than 5 sec (or better specification)

PH meter : Supplying Installation Testing and commissioning Microprocessor based water resistant PH meter with 1 to 3 point caliberation,digital display, temperature range 0 to 50 degeree celsious, resolution with two decimal, PH range 0 to 14 ph , accuracy +_0.005 for each PH measurement

RO water unit : supplying Installation , Testing and commissioning RO water plant unit with flow rate 100litper hr and the out put water has salt rejection 90 to 95 and TDS less than 50ppm. The collection tank also have the capacity 100 ltr with all conduits and fitting. The system should have a water level indicator in the tank.The RO membrane and EDI module should be compatible with feed water quality of chlorine level 3 ppm SDI up to 20 and conductivity 2000micro siemens.. The system should have auto dignostic facility with error and alarm for the above parameters.The system requires raw water feed pump with pressure guage.The pressure sand and multigrade filterand cabin filter shall be needed.. Prefilter for removal of suspended matter , carbon filter for removal ovf colour and odur should be needed. Instrumentation for online flow, conductivity , PH and TDS also included. The system should be table or wall mounted with suitable bracket and stands. all module should be fitted in a box frame with noncorrossive material.

Movable tissue culture racks : Supply Installation Testing and commissioning of movable tissue culture racks , powdercoated, fabricated with CRCa steel of approximate outer dimension LWH 3.8x1.5x2.75m with nine shelf frame to load TC bottle traysand top of the frame paved with 4 mm glass pane.Each shelf frame of rack is fabricated with50x25mm C channels minimum 2mm thick and provided with nine numbers of easily loadable dock raws of width 39.5 cm across made of T of flange and L angles 3x3 cm to load TC traysof width 38 cm. Each rack is made by combining by three component columnof shelves fitted using nuts and bolt on rectangular tube augmented with diagonals and cross support.Each rack is fixed mounted on 7.5x4x .6 cm mS channel base frame provided with necessary wheels with reinforcement and is movable using gear mechanism over solid rails fixed on floor, load would be 2500Kg per rack.Spacer arrangement of 20cm between rack is required.High output LED tube light fitted beneeth the slide row T'S to provide light intensity of 1200lux/m2 8 Nos in each of 9 frames using concealed wiring without sagging. master On/Off switch for rack and MCB for each shelf. 24 Hour On/Off time control with automatic restart on power break and variable delay intervels.

Floor Trolly : supplying Trolly made with SS304, 50cm x50cm back frame with 100mmx 50mm tube having a height of 2 tier system with wheels.