Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹1.5 Cr
EMD Value
₹2.9 L
Closing Date
16 Oct 2026, 3:00 pm6d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer Sonamura Division PWD(RandB)
O/o the Executive Engineer Sonamura Division PWD(RandB) Sonamura Sepahijala Tripura
SH Patch Grouting Patch Soling Patch WBM3 Carpeting with sand seal coat RCC Toe Wall CC Block pitching etc and other allied works
2026_CEPWD_77964_1
122/RDNIeT/SE-IV/PWD (RandB) /2026-27
Open Tender
Civil Works - Roads
Percentage
90 days
Sonamura
Please refer Tender documents.
10 documents required · 10 mandatory
₹4,000
₹2.9 L
9 Oct 2026
9 Oct 2026
16 Oct 2026
9 Oct 2026
16 Oct 2026
9 Oct 2026
9 Oct 2026 - 15 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation for Structures
A. Without dewatering. Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including
setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a
lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material. Ordinary Soil
(i) Upto 3 m depth | 184.79 | Cum | 458.2 | ₹84,669.4 |
| 2 | Filling in foundation trenches as per drawing & MoRDtechnical specification Clause 305.3.9, 1200. I) Sand filling. | 19.45 | Cum | 1,392.25 | ₹27,080.65 |
| 3 | Providing concrete for plain concrete (using jhama brick aggregate) in open foundations complete including
formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including
centering, shuttering, staging etc. but excluding reinforcement) I) P.C.C grade M 10 (using jhama brick aggregate) (i) Nominal mix 1:3:6 | 19.45 | cum | 9,448.65 | ₹1,83,785.69 |
| 4 | Providing concrete for plain concrete (using jhama brick aggregate) in open foundations complete including
formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including
centering, shuttering, staging etc. but excluding reinforcement) II P.C.C grade M 15 (using jhama brick aggregate) (i) Nominal mix (1:2.5:5) | 262.59 | cum | 9,708.6 | ₹25,49,400.69 |
| 5 | Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar reinforcement in
foundation complete as per drawings & MoRD technical specifications Clauses 1000 & 1202. | 6.12 | Tonne | 91,691.15 | ₹5,61,241.53 |
| 6 | Providing & laying filter media with jhama brick aggregates as per specification to a thickness of not less than 600 mm
with smaller size towards the soil & bigger size towards the wall & providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and MoRD technical specification clause 1204.3.8. | 35.91 | cum | 4,796.45 | ₹1,72,240.52 |
| 7 | Turfing with Sods. Furnishing and laying of the live sods of perennial turf forming grass on embankment slope , verges or other
locations shown on the drawing or as directed by the Engineer including preparation of ground, fetching of sods
and watering as per MoRD Technical Specification Clause 309. | 99.75 | Sqm | 36.2 | ₹3,610.95 |
| 8 | Providing weep holes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall
with 100 mm dia AC pipe or uPVC pipe (110 mm OD of 6.0 kg/cm2 pressure) extending through the full width of the
structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRD technical specification
clauses 614, 709, 1204.3.7. | 119.7 | Mtr | 393.8 | ₹47,137.86 |
| 9 | Flat Brick soling. Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from
clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN
as per MoRD Technical Specification Clause 412. | 118.4 | Sqm | 602.4 | ₹71,324.16 |
| 10 | Brick edging laid length wise. Providing and laying brick edging laid lengthwise on prepared subgrade according to lines, grades and crosssection shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering
and rolling the same with three wheeled road roller 80-100kN as per MoRD Technical Specification Clause 412. | 52.5 | Mtr | 88.6 | ₹4,651.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.24 MB
DNIT122R.pdf
Tender Documents • 3.21 MB
BOQ_79358.xls
BOQ • 0.31 MB
Addl122SE.pdf
Additional Documents • 0.47 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .