REPAIR TO SUNKEN FLOOR, REPLACEMENT OF SANITARY FITTING INTERNAL WATER SUPPLY, RWP, FLOORING AND RELATED WORKS IN OTM AND RESIDENTIAL ACCN AT CENTRAL ZONE UNDER GE (NORTH) BINNAGURI

Amount

Demolition of cement concrete of any description in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for water proofing treatment to sunken floor with the following course of treatment / specification :- (i) Cleaning top surface of floors / slabs and laying 50mm thick (avg) PCC of grade M10 (Nominal mix), mixed with WPC as per manufacturer's instruction laid in slope 1:20 towards spouts including coveting corners. (ii) 15mm thick plastering in CM (1:4) on sides mixed with WPC as per manufacturers instruction. (iii) Applying 1st layer of slurry @ 0.488 kg/ sqm mixed with acrylic based polymer modified cementious compound @ 0.253 kg / sqm , this layer shall be allowed to air cured for 4 hrs . ( iv) Applying 2nd layer of slurry @ 0.242 kg/ sqm mixed with acrylic based polymer modified cementious compound @ 0.126 kg / sqm this layer shall be allowed to air cured for 4 hrs followed with water curing for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces. (vi) Providing 150 micron thick polyutethene paint in two coats ( each of 75 micron measured dry surface over a coat of PU primer including preparation. (Make of PU primer- Dek guard EP - 302 of m/s Fosroc or equivalent approved brand . Make of PU paint- Dek guard PU or equivalent approved brand. (vii) Sunken floor shall be tested for water tightness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage / seepage exists. (ix) Sunken portion shall be filled with lean concrete of grade M 7.5 stone aggregate. Note : Treatment shall be carried out by authorised applicator approved by the manufacturer.

Disconnecting the existing water tanks and setting aside exceeding 500 ltrs and n.exc 1000 ltrs and refixing the same in the same place complete all as specified and as directed.

Taking down existing tarfelt including tiles, cement lime concrete & screed bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 50m and n.exc 100m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces for laying acrylic polymer modified, fibre reinforced waterproof coating, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating Roof Guard or equivalent as approved by the GE in 4 coats of application:- (a) applying primer coat with Primer @ 0.3 kg /sqm. (b) over priming coat applying roof guard or equivalent as approved by the GE as specified below or manufacturer instructions with fibre reinforcement a width of approx 1m @ 0.75kg/sqm on the flat or vertical surfaces over parapet wall and ensure that there are no bubbles of creases. Overlapping of the fibre is a minimum of 50mm and allow this coat to dry for a period of 2-6 hrs depending on the atmospheric condition. (c) Applying second coat of roof guard or equivalent as approved by the GE @0.75Kg/sqm. (d) Applying final coat of primer @ 0.08kg/sqm after 2nd coat has dried properly. (Note : Water Proofing treatment shall be carried out by authorised applicator approved by the manufacturer).

Dismantling water tank exc 500 & n.exc 1000 ltr capacity and removing to store complete all as specified and as directed.

S&F 1000 ltrs rotational moulded polyethylene water storage tanks in multi layer (cylindrical vertical with closed top) including connecting up pipes securing access covers etc complete all as specified and as directed.

S&F 20mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and as directed.

S&F in repairs 20mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and as directed.

Taking up or down 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed.

Taking up or down 20mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15 mm bore complete all as specified and as directed.

Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 20 mm bore complete all as specified and as directed.

Supplying, laying, jointing and testing 15 mm nominal bore Steel water tubes, 'medium grade', galvanised, with all fittings; fixed to walls and ceilings or laid in floors complete all as specified and as directed.

Supplying, laying, jointing and testing 20 mm nominal bore Steel water tubes, 'medium grade', galvanised, with all fittings; fixed to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.

S&F in repairs 20mm dia gun metal, globe or gate valve with iron wheel head, screwed both ends for 20mm bore GI pipe all complete as specified and as directed.

S&F in repairs 200 mm dia PVC SWR pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repairs 200 mm dia PVC bends/shoe of any radius with access door complete all as specified and as directed.

S&F in repairs Plain, galvanised, mild steel sheeting 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

S&F of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with necessary clamps including taking down old unserviceable pipe including fittings complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) bend complete all as specified and as directed.

S&F of 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with necessary clamps including taking down old unserviceable pipe including fittings complete all as specified and as directed.

S&F in repair 75mm dia PVC (SWR) bend complete all as specified and as directed.

Dismantling floor, hearth or wall tilling including cement mortar being (but not backing), and rubbish off the premises complete all as specified and as directed.

M&L for non skid ceramic tiles of size 400x400x7mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over screed bed or bedding of 15mm thick in CM 1:6 complete all as specified and as directed.

M & L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm, in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M&L for 300 x 450mm glazed ceramic coloured tiles in vertical surface not less than 7 to 8 mm thick set and jointed in neat cement slurry laid over 10mm thick rendering in cement mortar (1:4) and pointed in white or coloured cement to match etc complete all as specified and as directed.

M&L for Vitrified Ceramic tiles light shade 8mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor and including 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified and as directed.

M&L for Vitrified Ceramic tiles light shade 8mm thick (square/ rectangular) polished, area of each tiles not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor and including 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) including existing treatment of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) Type C-2 (40 mm graded stone aggregate) as in plinth protection including finishing the concrete surface even and smooth w/o using extra cement complete all as specified. Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.

M&L for prepolished chequered tiles of size 300 x 300x 25 mm set and jointed in neat cement slurry including 15mm thick screed bed in CM (1:4) and pointed in white or coloured cement mixed with mixture of pigments to match with the colour of tiles including demolition of existing floor tiles complete all as specified and as directed.

M&L for 80 mm thick precast concrete prepolished coloured interlocking paver block with grery cement and pigment, any shape and size confirming to IS 15658-2006, M-40 including dismantling of old existing paver blocks Grade complete all as specified and as directed.

M&L for sand filing as sand cushioning under interlocking paver blocks complete all as specified and as directed.

M&L for granite work 18-20 mm thick table rubbed and polished as in top of kitchen slab over 15 mm thick cement screed bed cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of old granite work complete all as specified and as directed.

M&L for rounding to edge of stone, Granite slab, kota stone slab one edge, such as in steps, cooking platform, and other similar work complete all as specified and as directed.

S&F in repair, Shower rose swivel type brass chromium plated 125 mm size including fixing to steel pipe or unions complete all as specified and as directed.

S&F in repair 10 ltr capacity PVC flushing cistern low level white colour including PVC connection 450 mm long, PVC flush pipe of required length etc complete all as specified and as directed.

S&F in repair 15mm dia CP pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia bore of pipe complete all as specified and as directed.

S&F in repair bib tap 15 mm bore, fancy type Brass CP, fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs CP fancy type 15mm dia stop cock/angular stop cock (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.

S&F in repairs of Vitreous China bowl urinal flat back of size 465x355x265 mm White ( minimum) including providing and fixing plugs, bedding the urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and providing grating and union for discharge pipe including 32mm bore PVC discharge pipe complete all as specified and as directed.

S&F in repairs vitreous china wash basin (WHB), white, flat back of size 550 mm x 400 mm (1st quality) including brackets, waste fittings, brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts, flange end embedded in red lead cement, including cutting for and pinning in ends of brackets or erecting stand but including providing brackets, waste pipe & CP waste coupling, PVC connection 450 mm long complete all as specified and as directed.

S&F in repair vitreous china wash basin counter type, white oval shape including waste chain and plug and porcelain stopper but including brackets, waste pipe & CP waste coupling, PVC connection 450 mm long complete all as specified and as directed.

S&F in repairs PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified and as directed.

S&F in repairs Grating 100 mm dia with waste hole of PTMT (minimum weight - 40 gms) complete all as specified and as directed.

S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) EWC, with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device, including making all necessary connections complete all as specified and as directed.

S&F in repairs vitreous China white Squatting pan, 'Orissa' pattern size 580 mm x 440 mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including cement concrete for bedding, connection to drain pipe and to flushing pipe, anti syphonage pipe etc complete all as specified and as directed.

S&F in repairs 15mm dia fancy type Chromium plated with long shank and cup (concealed type) stop valve cost copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe 15mm bore complete all as specified and as directed.

S&F in repair CP health faucet with one meter tube and hook complete all as specified and as directed.

S&F in repair CP Jet spray with 1.0 mtr tube complete all as specified and as directed.

S&F in repair plastic seat cover white with recessed bottom with PVC hinging device complete all as specified and as directed.

S&F in repair Toilet paper holder continental type complete all as specified and as directed.

S&F in repairs 0.63 mm thick plain galvanised, mild steel sheeting as in crumple joints, ridges, hips, valley gutter, drip and straight flashing with suitable size screws and gutties (length and girth as fixed) with grade of zinc coating 275 grms / sqm complete all as directed all (at crumple joints) with suitable size screws complete all as specified and as directed.

S&F in repair 40mm bore high density polyethylene pipes (HDPE) of pressure rating 6kgf/Sqcm fixed complete to floors, wall, ceilings etc complete all as specified and as directed.

M&L for nahani trap/floor trap for 100mm dia outlet pipe, including making good disturbed area/ surfaces with cement concrete/cement mortar 1:3 etc including taking down old unserviceable nahani/floor trap complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L brickwork with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and as directed.

M&L brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed.

Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:6) on concrete/brick wall surfaces finished even and fair without using extra cement complete all as specified and as directed. .

M&L for 5mm thick plaster rendering on fair faces of concrete surfaces as in ceiling in CM(1:3) finished even and fair (without using extra cement) complete all as specified and as directed.

M&L for 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm and 5mm thick) mixed with water proofing compound in top layer @ 200 ml/50 Kg of the weight of cement or as per manufacturer's instructions finishing the surface even and fair complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately.

Supply only liquid water proofing compound conforming to IS: 2645-1975 specification complete all as specified and as directed

M&L for applying two coats of exterior emulsion paint (weather coat) over a coat of exterior primer damp coat on a new plastered surfaces of facia, roof projection, chajja etc including necessary preparation of surfaces complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer over a coat of wall care putty over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash including washing floors, cleaning glass, joinery, electrical fittings, wiring etc, of drops and splashes complete all as specified and as directed.

Resucuring or easing & adjusting including taking down of aluminium door shutter not exc 2sqm each and refixing in the same opening after carried out repairs to shutter & floor top self closing device, top pivot, handles etc complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in repair 3mm thick sheet glass, ordinary quality, fixed with existing snap beading, rubber gasket etc area of each pane n.exc 0.50 sqm complete all as specified and as directed.

S&F in repair 5.5mm thick sheet glass, ordinary quality, fixed with existing snap beading, rubber gasket etc. area of each pane exc. 0.50 sqm complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Taking down chowkat or frame n.exc 1.5 sqm each with shutters (without taking off shutters from the frames) including building hardwares etc including removing material from work site complete all as specified and as directed.

S&F Solid PVC door frame of size 50 X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specifications and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain colur PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, Supplied and Fixed in the frame at site as per specification and drawings complete all as specified and as directed.

S&F of 100 mm size butt hinges stainless steel with MS hinge pins bright finished complete all as specified and as directed.

S&F 150mm long aluminium anodised tower bolts complete all as specified and as directed.

S&F 150mm size aluminium anodised door handles complete all as specified and as directed.

S&F flat iron clamps, hold fasts, wall ties, hooks for hanging fans and other similar small steel article confirming to Fe – 290 Grade - E 165 with and including necessary nut-bolts, washers, screws etc. as required complete all as specified and as directed.

INTERNAL ELECTRIFICATION Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with all accessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylam sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly for one light point controlled by one, one way switch complete all as specified and as directed.

All as per item No 84 here in before but for one ceiling fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed.

All as per item No 84 here in before but for one 3/5 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.

All as per item No 84 here in before but for one 3/5 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.

All as per item No 84 here in before but for one bell point controlled by one, bell switch 5 Amps complete all as specified and as directed.

All as per item No 84 here in before but for light point controlled by two way switch Amps complete all as specified and as directed.

All as per item No 84 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.

S&F switch piano single pole flush type 5 amps, 230 volts one way complete all as specified and as directed.

S&F switch piano single pole flush type 5 amps, 230 volts two way complete all as specified and as directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.

S&F Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with complete all as specified and directed.

S&F of socket outlet 2 in 1, 5 Pin 5/15 Amp multipurpose 230 volt flush type complete all as specified and as directed.

S&F in repair ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S&F in repair Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F in repair Modular switch, single pole, Two way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F in repair Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F in repair Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S&F in repair Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed.

S&F in repair stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans, ISI marked complete all as specified and as directed.

S&F in repair lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S&F in replacement of LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and as directed.

S&F in repair Call bell Ding dong, 230 Volt single phase complete all as specified and as directed.

S&F in repair deluxe type electronic fan regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.

S&F in repair hylam sheet 3 mm thick white in colour of size 130 mm x 180 mm including taking down existing unserviceable complete all as specified and as directed.

S&F in repair hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down existing unserviceable complete all as specified and as directed.

S&F in repair hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm including taking down existing unserviceable complete all as specified and as directed.

S&F in repair hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable complete all as specified and as directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S&F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including removal of old unsv fitting complete all as specified and as directed.

S&F IP 20, Class I, LED Mirror light fitting 1 x 9 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including taking down the old unserviceable fitting complete all as specified and as directed.

S&F Recess round shape LED ceiling light 12 Watt fitting (6'' outer dia) for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection and taking down the old unserviceable fitting complete all as specified and as directed.

S&F Post top lanterns 15 watt LED light fitting ,new generation, energy saving, environmental friendly, long life with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable up to ceiling rose and necessary mounting arrangements including taking down the old unserviceable fitting complete all as specified and as directed.

S&F Recess mounting flat panel 34 Watt LED fitting (2'X2') for armstrong/ grid ceiling, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness SMD LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, including necessary connection and taking down the old unserviceable fitting complete all as specified and as directed.

S&F of Decorative wall light fixture made up of polycarbonate suitable for 15 Watt LED retrofit of type B-22 base, IP66 grade, with and including 15 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and as directed.

M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non- metallic concealed conduit with and including taking down unsv sub main, complete all as specified and as directed. Note: Two runs of sub main wiring cable alongwith one run of earth wire with and including 25 PVC conduit pipe shall be measured as one unit length.

M&L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incoming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 04 Nos electronic meters etc including taking down the old unserviceable one complete all as specified and as directed.

S&F of moulded case circuit breaker (MCCB) four pole Adjustable type 415 volt, 50 Cycles, 160 Amps of breaking capacity 36 KA after and including taking down/dismantling of old existing unserviceable one complete all as specified and as directed.

S&F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure complete all as specified and as directed.

S&F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface including removal of old unsv sheet metal enclosure complete all as specified and as directed.

S&F in replacement of MCB, Triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed.

S&F in replacement of MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with complete all as specified and as directed.

S&F in replacement of MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with complete all as specified and as directed.

S&F in replacement of single pole and neautral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240 Volts, including necessary connection complete all as specified and as directed.

M/S SINHA ENTERPRISE

BBKundu

BIG BEN ENTERPRISES

M/s. MD IRSHAD

S.N. GHOSH AND CO.

SG ENTERPRISE

ANIL ENGINEERING CO