NIT No. 25 Item No. 14 (22-23) EE (T)/ACE

Dismantling of electric connection from panel and motor, pump and motor from coupling, motor and pump removed from base frame. Removing suction and delivery lines, sluice valves, NRV, old damaged MS base frame from foundation etc by electric cutter, gas cutter, tools and tackles, manual labour and shifting the same to JE store.

Breaking of existing RCC foundation by manual means including manual tools or electric demolition hammer as per site requirement including digging upto 50 cm for laying the new foundation and disposing off malba as per instructions from engineer – in – charge within 3 km of radius from site.

Making/ Casting the new foundation with the rich RCC mixture upto 600 m.m height suitable for 100 H.P pump sets. i/c providing the foundation bolts (6 nos. each) & fixing the same in the foundation before casting etc. as required. Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump including form work and finishing etc as required as per site requirement.

Providing the Sluice valve P.N 1.0 Size 80mm. Make: Kirloskar/IVC/DJB approved. DJB SOR: 4.12.6

Providing the NRV P.N 1.0 Size 100mm. Make: Kirloskar/IVC/DJB approved. . DJB SOR: 4.9.8

Supply and fixing of suitable TC/N/016 tyre coupling for the above pump-set(100HP set) and motor as per site requirement and directions of engineer in charge. DJB SOR: 21.8.17 TC/N/016

Supply and fixing of MS coupling guard suitable for above pumpset including riveting, fixing including drilling holes in MS base frame and fixing the same with the help of necessary nut bolt as required at site.

Supply of MS Nut bolt & Washer of off size as per size requirement.

Supply of 50% Neoprene Rubber sheet as per size requirement. DJB SOR: 22.6.1

Rubber mats for electrical purpose as per IS: 5424-1969, black , red, blue plain chequered of 1mX2mX12.5mm. DJB SOR: 22.4.2

Fabrication/Supply of the Suction line /Bend (1Nos.) made out from B class M.S Pipe Size 200 N.B 6 mtr. approx. duly flanged as per existing.

Providing the Delivery line gap piece,/Bend (1Nos.) made out from B class M.S Pipe Size 200 N.B. 10 mtr approx duly flanged as per existing. 10 mtr. approx.

Fixing of MS Base frame on the foundation, Suction /Delivery lines, Valves, gap pieces by electric welding set, manual labour, alignment the pump/ motor, fixing of MS delivery line in the existing pumping main and also making electric connection of the pump sets etc.

Painting the complete pipeline, motor, pump sets, nrv, sluice valves etc with two coats of anti- corrosive paint as per directions of engineer in charge.

Testing & commissioning of above system first at NO LOAD & then at ON LOAD and for its proper operating as per the satisfaction of engineer in charge.

Naman Enterprises

HYDROCON ENGINEERS

Devraj Enterprises

Goodwill Enterprises

Shakti Trading Co.