3-Moradabad se Kanth road ko jaane wale marg par agawanpur ishthit Over bridge pr path Prakash vyavastha ke sudridhikaran karya.

Supply and fixing of Decorative LED pole light in 9000mm height fabricated at the bottom 2000 mm with pre galvanized (GI) Pipe of 165.1mm size in 3000mm length with precisely CNC Laser Cut junction box made with in-house Rotatory Laser cutting machine for improved aesthetics. The upper part of the pole is sophistically illuminated with single piece 6000mm long polycarbonate diffuser of 150mm and inbuilt LED light on 120w. Base is made of MS sheet of 300x300mm size with 16mm thickness. This high-performance internal Module is made in TRICOLOR LED with separate Amber, white & green LEDs with lifespan exceeding 50,000 hours at 40°C, a high-efficiency driver exceeding 85% efficiency and a power factor greater than 0.95 for optimal performance and minimal energy consumption. Engineered to operate flawlessly from -15°C to +50°C, it features a THD below 15% for a cleaner power system. The Pole is built-in with an external surge protection device rated at 10KV for long-term operational stability The pole is fitted with Electrical accessories (MCB, Heavy duty connector, bakelite sheet & Channel) and will be mounted with 4pcs foundation bolts of size 750mm x 24mm (Thickness) Model - MF MD 122A 9000mm. RCC foundation including the cost of foundation, foundation bolts, complete in all respect as per direction of E/I. (Mayfair, vak light, Astra Lite)

Dis-mantaling, Loading, cartage and unloading of damaged or un-used STP poles to the Specified MDA store, complete in all respect as per direction of E/I .(PSR).

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 140 to 150 Watt. Confirming to IP 66 Protection complete in all respect as per direction of E/I.CAT-AAA SOR No. 1425/2018 (Halonix, Jaguar)

S & F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve S.I.no. 1002(CAT A)/2018

S/E of Double walled corrugated HDPE pipe size 90/63 mm complete in all respect as per direction of E/I.

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable enteies Electrical control panel with TPN MCCB's (Four pole 36 KA with thermal maganatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F., KW etc.) in each phase with touch type selector switches for different reading, instrument fuses, current transfomer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A & B only. complete in all respect as per direction of E/I. Incoming 200 Amp. MCCB-1 No Outgoing (a) 100 Amp. MCCB-2 Nos. (ii) Cat. B. Pannel Cubicle Type each 812/2018

Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer Gl pipe of 16 swg and inner Gl pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.L. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.1. strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. complete in all respect as per direction of E/I.(S.I.No-725 (A) PWD Schedule-2018)

Supply and fixing of horizontal air termination (roof conductor) of 25mm x 3mm G.I. strip, G.I. clamps on surface complete in all respects as approved by Engineer-in-charge.710(PWD)SOR-2018

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect as per direction of E/I. 807(PWD)SOR-2018 (F)(ii) 40 A TPN

S/F og G.1. pipe 40 mm dia 'B' class for climbing up the cable from ground to overe head line (P.S.R.)