Construction of Vehicle Parking Shed at Mini Vydyuthi Bhavanam, Tirurangadi, Electrical Circle Tirur, Malappuram District

DSR_10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes (cost index (c) : 1.3268 included in Rate

DSR_12.50 : Providing and fixing precoated galvanised iron profile sheets (Size, shape and pitch of corrugation as approved by Engineer - in charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by the Engineer -in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Cost index (c):1.3268 included in Rate)

DSR_13.61.1 : Painting with Synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats one new work (cost index © : 1.3268 included in Rate

DSR_13.1.2 : 13.1.2:12 mm cement plaster of mix :1:6(1 cement : 6 fine sand) cost index © 1.3268 included in Rate)

DSR_13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @2.20 kg/10sqm) (Cost index © : 1.3268 included in Rate)

DSR_16.91.2 : Providing and laying factory made chamfered edge cement concrete paver blocks in foot path, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size / shape made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. Complete all as per direction of Engineer-in-charge. 80 mm thick C.C. Paver block of M-30 grade with approved colour design and pattern. (Cost index (c) : 1.3268 included in Rate)

DSR_12.51.3 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/sel tapping screws complete : North light curves (cost index (c) : 1.3268 included in Rate)

DSR_11.20.2 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Medium shade pigment using 50% white cement 50% Grey cement (cost index (c) : 1.3268 included in Rate)

DSR_2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) / mannual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil (cost index (c) : 1.3268 included in Rate)

DSR_16.83 : Taking Out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc. disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer in charge. (Cost index (c) : 1.3268 included in Rate)

DSR_15.2.1 : Demolishing cement concrete mannualy / by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-Charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) (cost index © 1.3268 included in Rate)

DSR_15.9.2 : Demolishing stone rubble masonry mannually / by mechnical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer - in - charge : in cement mortar (Cost index (c) : 1.3268 included in Rate)

DSR_4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :1:3:6 (1 Cement : 3 Coarse and : 6 graded stone aggregate 20 mm nominal size) (Cost index © : 1.3268 included in Rate)

DSR_5.2.2 : Reinforced Cement Concrete work in walls (any thickness) including attached pilasters, buttresses, Plinth and string courses, fillets, columns, pillars, piers, abutments, posts and strut etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement : 1 :1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (cost index (c) : 1.3268 included in Rate)

DSR_5.22.6 : Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo Mechanically Treated bars of grade Fe-500D or more (cost index © : 1.3268 included in Rate)

DSR_5.9.1 : Centering and shuttering including strutting, etc. and removal of form for : Foundations, footings, bases of columns, etc for mass concrete (Cost index © : 1.3268 included in Rate)

DSR_2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m (cost index (c) : 1.3268 included in Rate)

DSR_16.84 : Laying old cement concrete interlocking paver blocks of any design /shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer -in-charge. (Old CC paver blocks shall be supplied by the department free of cost) (cost index (c) : 1.3268 included in Rate)

DSR_10.19 : Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. (Cost index © : 1.3268 included in Rate)

DSR_10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Cost index © : 1.3268 included in Rate)

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

CONSOLIDATED BOQ (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Quoted Amount of BOQ1 in figures

GST Rate in percentage

Please Enable Macros to View BoQ information