UPGRADATION OF WATER FILTERIATION PLANT AT PALCHAN UNDER AGE (I) R AND D MANALI

Supply, installation, testing and commissioning of ACTIVATED CARBON FILTER with UV System having Epoxy Coated Pressure vessel with Set of frontal pipe work and valves Set of internal water distribution and collection system & Pressure gauge to monitor head loss across the filter with Orifice board for indicating wash water flow to be fitted in drain sump to remove dirt, dust, silt, sand, insects, fibre, odour colour and other organic matters etc of the following specification:- Dia. :- 1800mm HOS:- 1875mm Flow rate :-61 m3/hr Shell:-5mm Dish End :6mm Frontal Pipe Work:100mm Carbon Depth :-1000mm Carbon Qty. :- 2.54 m3 MOC :-MSEP

Supply , installation,test and commissioning of 5 HP Three Phase Copper Winding Centrifugal Monoblock Pump, 50X40mm with 42 m head, complete including provision of necessary foundation for pump sets connected to suction and delivery etc complete with provision of following all as specified and directed by Engg - in- charge:- Make : Kisloskar, CG, KSB

Supply, installing, testing and commissioning factory made LT ( 415 Volts, 50 Hz , 3-phase, 4 wire supply ) CPRI approved, factory assembled LT Panel Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated Aluminium bus bars of 100 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, ingress protection class ( IP-54 ) and made of 3.15 mm thick CRCA mild steel sheet and mild steel, Angle iron frame work made out of 50 X 50 X 6 mm ), front and rear opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FR wire of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey shade 7035. embedded in ground with and including bocks of PCC 1:2:4 type B1 of block size 30x30x30 cm comprising of the following:-

The panel manufacturer should have following Govt. Approved Certificates: 1. Panel should be according to IEC-61439. CPRI Certification Degree of Protection IP-54 (IS/IEC : 61439 (Part-1), 2011 & IS/IEC : 61439 (Part-2) 2011) 2. Tempreature Rise (IS/IEC : 61439-1, 2011 & IS/IEC : 61439-2 2011) 3. CPRI Short Circuit IEC-61439-1 & 2 withstand strenght should be 70kArms for 1.0 Sec with intial peak of 154kApk 4. CPRI Certification IEC-61439-1 & 2 Rated current for short circuit not less than 6300 A with rated insulation voltage 660V 5. ISO 9001 CERTIFIED