Plan-Konothupuzha Thodu Cleaning in ward 16-Proj.no.323/24-25

Amount

THODU CLEANING

OD345489/2024-2025:Removing water hyacinth and other vegetation and floating bodies from the water way cutting , collecting, conveying and depositing at contractors own convenient places with all leads and lifts and other incidental charges such as hire charges for country boats and other necessary equipments required for the work etc complete as per direction of departmental officers at site

OD345490/2024-2025:Desilting thodu using hydraulic excovator ( cleaning debris and silt from thodu) depositing at bank dressing etc complete

OD345601/2024-2025:Ring Bund Type II putting UP ring bund with earth filling Gunny Bags of top width 0.75m bottom width 1.5m height 1.5m sides and filling in between with earth to form ring bund and maintaing same leak proof till the completion of the work and clearing the site by dismantling the bund after completion of the work etc vomplete

50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

OD346181/2024-2025:Dry rubble masonry - Dry rubble masonry with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at siteModified 60.7.1

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

5.21:Extra for providing and fixing expanded metal mesh of size 20x60 mm and strands 3.25 mm wide 1.6 mm thick weighing 3.64 kg per sqm for encasing or rolled steel sections in beams, columns and grillages excluding cost of hangers.

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

4.3.2:Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

ELDHO O M (BID ID -2097057)

Bidder Name

MANOJKUMAR M R

ELDHO O M