WBPWD/EE/BNWD/NIQ08e/2026-27

Grandeur 6FT Main Table + ERU 1800 L x 2100D x 740H mm The Grandeur Veneer Desk Range – 6‑foot (1800 mm) main table with 6‑foot ERU is built with a 43 mm thick combination of MDF and particle board finished in veneer and clear lacquer, with all edges banded in 1 mm veneer lipping. It includes a leatherette‑wrapped pad on an 18 mm MDF base, a drawer unit with 43 mm veneered panels, 18 mm pre‑laminated twin board construction, 9 mm particle board bottoms with leatherette, soft‑closing channels, and a central lock. The modesty panel is 18 mm pre‑laminated twin board with aluminum trims, while the ERU worktop matches the 43 mm veneered construction of the main top. The understructure and ERU hinge door unit are made of 18 mm pre‑laminated twin board with soft‑closing hinges, handles, and a side central lock. An access flap with integrated power box provides 3 universal sockets, 2 USB points, 1 HDMI port, cable grommet, and CAT‑3/CAT‑6 connections. Overall assembly dimensions may vary by ±10 mm, ensuring a robust executive desk system with integrated storage and connectivity. [Rate including all taxes & duties]

Marvel Executive High Back Chair Providing, supplying and placing of High Back Chair. SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette, Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D) HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cm ARMRESTS : The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features: • 360' revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter. Overall Dimensions of Chair, Seat Height -43.1-53.1cm Height -112.7-130.2cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm, This product should be certified by Indoor Advantage GOLD, GREENGUARD GOLD, BIFMA Level 2 & GREEN PRO. [Rate including all taxes & duties]

Mingle Unitized Conference Table- 2350L X 1150D X 740H mm Supplying and placing in position meeting table of the following specifications with overall size shall be 2350 X 1150 X 740.Work top-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing dual access flap provided for access to power supply and data cables. Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction. Wire Management- A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc).

Thrill Mesh full back chair The Chair features a seat made of 1.5 cm hot‑pressed plywood upholstered with fabric and moulded polyurethane foam, with extra thickness at the front edge for popliteal comfort (53.5 cm W × 51.0 cm D). Its back is injection‑moulded in glass‑filled nylon upholstered with mesh fabric, incorporating an adjustable polypropylene lumbar support with 5 cm range (51.0 cm W × 70.0 cm H). The seat foam is high‑resilience polyurethane with 45±2 kg/m³ density and 16±2 kgf hardness. Adjustable armrests offer six‑step up‑down movement (7.2 cm range), with PU‑moulded tops over glass‑filled nylon inserts. The chair uses a center tilt synchro mechanism with 360° rotation, three‑position locking, anti‑shock function, and tilt tension adjustment. Pneumatic height adjustment provides a 9.5 cm stroke, while the pedestal is glass‑filled nylon with five twin‑wheel castors (Ø66.1 cm pitch‑center, Ø76.1 cm with castors). Overall dimensions are 76.1 cm W × 76.1 cm D × 101.5–111.0 cm H, with seat height adjustable between 44.5–54.0 cm.

Finesse 5026 Table with ERU and Pedestal Supplying and placing in position Main Table & ERU of the following specifications. Its size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. ERU size shall be 1050 Width x 450 Depth x 705 Height. The top of Finesse ERU -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.

Greta 2.0 Full back Chair with Headrest The chair series is available in two models — full back and full back with headrest — and features a seat made of hot‑pressed plywood upholstered with fabric and moulded polyurethane foam (51.8 cm W × 49.7 cm D), a back assembly in glass‑filled nylon with mesh fabric and adjustable lumbar support (47.9 cm W × 66.9 cm H), high‑resilience polyurethane foam of 45±2 kg/m³ density, adjustable polypropylene armrests with swivel and to‑and‑fro movement, and an active bio‑synchro mechanism offering 360° rotation, tilt tension adjustment, five‑position tilt limiter, and a 1:2 seat/back tilt ratio housed in aluminium. The headrest is retro‑fitted, adjustable by 3.0 cm, and upholstered with HR foam, while the pneumatic height adjustment provides a 10.0 cm stroke. The pedestal is injection‑moulded 30% glass‑filled nylon with five twin‑wheel castors (Ø66.1 cm pitch‑center, Ø76.1 cm with castors), each 6.0 cm in diameter. Dimensions for the full back model are 76 cm W × 76 cm D × 96–106 cm H with seat height 43–53 cm, and for the headrest model 76 cm W × 76 cm D × 113–123 cm H with seat height 43–53 cm.

Storewell Plain Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available.

Thrill Cushion Visitor Chairs 1) THRILL CHAIR UPPERSTRUCTURE: It is a single shell 1.2 ±0.1cm. thick hot pressed plywood with moulded polyurethane foam on top & backing foam on rear side. It is upholstered with option of knitted & leatherette fabric.The seat has extra thick foam on front edge to give comfort to popliteal area. The foam backing done in back ( Executive chairs only) for extra fluffiness and comfort in chair. 2) SEAT & BACK HIGH RESILIENCE (HR) POLYURETHANE FOAM :The HR polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf as per IS:7888 at 25% compression. 3) M.S. VISITOR TUBULAR FRAME (For Thrill Visitore chair): The powder coated (DFT 40-60 micron) tubular frame is cantilever type & made of Ø2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube. 4)ARMRESTS: The armrest top is moulded from polyurethane(PU) with metal insert and mounted on to a tubular frame. WIDTH (W): 60.5 CM. DEPTH (D): 65.0 CM. HEIGHT (H): 86.5 CM. SEAT HEIGHT (SH): 46.0 CM.

Godrej Rejoice 1 Seater Sofa This furniture piece measures 91 × 83.5 × 81.5 cm (W × H × D) and is upholstered in coffee brown PVC with 1 mm thickness. The frame is constructed from pine wood with 10–12% moisture content, reinforced by 12 mm and 18 mm plywood. The seat uses slab stock foam with a density of 32 kg/m³, while the back cushion and armrests are filled with conjugated hollow fiber (recron) for comfort. The structure includes nylon webbing for support, and the legs are made of PVC, ensuring durability and stability.

Godrej Rejoice 3 Seater Sofa This furniture piece measures 176.5 × 83.5 × 81.5 cm (W × H × D) and is upholstered in coffee brown PVC with 1 mm thickness. The frame is built from pine wood with 10–12% moisture content, reinforced by 12 mm and 18 mm plywood. The seat uses slab stock foam with a density of 32 kg/m³, while the back cushion and armrests are filled with conjugated hollow fiber (recron) for comfort. Structural support is enhanced with nylon webbing, and the legs are made of PVC, providing durability and stability.