Construction of AVTS (ITC) & Hostel building at I.T.I. Tarsali, Vadodara.

Name of Work :- Construction of AVTS (ITC) & Hostel building at I.T.I. Tarsali,

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Item of Work Qty. Unit Rate in Amount

1 Excavation for foundation upto 1.50 mt depth including sorting out and 6338.00 Cum 125.83

stacking of useful materials and disposing the excavated stuff for all lead

and lift for all sorts of soil.

2 Excavation for foundation from 1.50 mt to 3.00 mt. depth including sorting 4384.00 Cum 166.44

out and stacking of useful materials and disposing the excavated stuff for

all lead and lift for all sorts of soil.

3 Excavation for foundation from 3.00 mt to 5.00 mt. depth including sorting 2929.00 Cum 180.38

out and stacking of useful materials and disposing the excavated stuff for

all lead and lift for all sorts of soil.

4 Dewatering for earthen dam and a lilke work foundation borrow pits 800.00 Hrs. 101.00

trenches with diesel or electrical pumping with 5 HP arrangement including

all cost of pipe line material labour as directed with all lift etc. complete.

5 Providing & filling Rubbles including hand packing & filling interstices with 1585.00 Cum 1086.50

quarry spalls in foundation & plinth including ramming & consolidating,

dressing etc. complete.

6 Providing and laying and fixing 50 mm thick expansion joint by hydro cell 476.00 Sq.m. 1491.03

semi rigid UV resistance with high performance laminated closed cell

polythene foam joint filler in sheet foam as directed, etc. complete.

7 Providing and filling the expansion joint by polymer confirm to BS 4254- 540.00 Sq.m. 515.39

1983 as per required shade and specification by making groove of 50 mm x

12.5 mm lather by cutting or by repairing groove and removing mortar drop

or any other foreign materials including applying primer and filling required

size (oversize of joint PU foam etc. complete.

8 Providing and fixing 25 cm wide & 3mm thick exterior composite panel on 76.00 Sq.m. 1054.34

existing expansion joint horizontally & vertically with all material, hardware,

accessories & fittings etc. completed.

9 Providing and laying controlled cement concrete M-150 and curing 387.00 Cum 4020.81

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in Foundations, footings base of

columns & mass concrete.

10 Providing and laying controlled cement concrete M-250 and curing 1666.00 Cum 4438.95

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in Foundations, footings base of

columns & mass concrete.

11 Providing and laying controlled cement concrete M-250 and curing 168.00 Cum 7528.54

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in Columns, pillars, posts and

struts upto plinth level.

12 Providing and laying controlled cement concrete M-250 and curing 834.00 Cum 5869.11

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in plinth beam.

13 Providing and laying brick work using common burnt clay building 377.00 Cum 4121.55

conventional type bricks having crushing strength not less than

Kg./Sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement :

coarse sand) including the cost of all materials and labour charges etc.

14 Filling available excavated earth (excluding rock) in trenches plinth side of 9241.00 Cum 133.65

foundation etc. in layer not exceeding 20 cm in depth consolidation each

deposited layer by ramming and watering etc. complete.

It. Item of Work Qty. Unit Rate in Amount

15 Filling in foundation and plinth with murrum or selected soil in layers of 20 1351.00 Cum 296.29

cm thickness including watering, ramming and consolidation etc. complete.

16 Filling foundation and plinth with sand under floors including watering, 676.00 Cum 471.69

ramming and consolidating dressing etc. complete.

17 Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 1282.00 Cum 3314.82

B.T. stone aggregate 20mm nominal size) and curing complete including

cost of form work in foundation and plinth.

18 Anti- Termite System : Providing and laying of permanent piping technology 4332.00 Sq.m. 197.96

anti termite treatment before flooring work by installing LLDP (Low Linear

Density Polyethylene) tube of 8mm O.D.& 6.4 mm I.D. with inbuilt pressure

compensation chip every 30 cm interval in the tube, having working

pressure of 2 kg/cm2 and release rate of 1.9 ltr/hour fixed by p-clips and

nails. The LLDP pipe shall be installed at the entire periphery of the

building and at internal network of building at a depth of 20 to 200 mm

under floor at every 2 to 3 mtr. c/c distance (adjusted as per building layout)

& ends of loop pass through a PVC elbow of minimum 32 mm ID at junction

box and the loop shall termite in junction boxes & test every junction during

injecting chemicals for termite control treatment.

The anti-termite chemical Imidacloprid 30.5% SC mix as per IS-6313 (part-

3) shall ne injected by the pressure pump diluted with water @ 10.5 ml/5 ltr

of water at the rate 2 kg/sq.cm @ 5 ltr/SMT. Permanent pipe system with

Junction boxes (only pipe Network) including Anti-termite chemical injected

area (chemical injecting including labour cost). The contractor shall submit

approved line plan for piping system and junction boxes dully approved by

engineer-in-charge with bond of 5 year warranty.

19 Providing and laying controlled cement concrete M-200 and curing 507.00 Cum 4809.62

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in plinth slab.

20 Providing and laying controlled cement concrete M-200 and curing 307.00 Cum 7530.56

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in Columns above plinth level.

21 Providing and laying controlled cement concrete M-200 and curing 781.00 Cum 6113.53

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in Beams upto Terrace floor

22 Providing and laying controlled cement concrete M-200 and curing 1282.00 Cum 6590.25

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in Slab upto Terrace level.

23 Providing and laying controlled cement concrete M-200 and curing 74.00 Cum 6649.84

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in Wall.

24 Providing and laying controlled cement concrete M-200 and curing 51.00 Cum 6769.02

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in Staircase upto Terrace level.

25 Providing and laying controlled cement concrete M-200 and curing 23.00 Cum 7494.20

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in Lintel upto Terrace level.

26 Providing and laying controlled cement concrete M-200 and curing 106.00 Cum 7958.80

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in Chhajja upto Terrace level.

27 Providing I.S.I. Mark Fe-500D T.M.T. bar reinforcement for RCC work 692930.00 Kg. 77.79

including bending, binding and placing in position complete for all floors.

It. Item of Work Qty. Unit Rate in Amount

28 Providing and fixing rebar of 10 mm diameter using chemical grout of 1580.00 No. 70.70

approved brand and equivalent make incl. cost of all equipment, tools,

material, labour, scaffolding, staging etc. Standard procedure as mentioned

in manufacturers specification shall be strictly followed, which shall be

submitted and got approved from the authority prior to start work. The rate

shall also include cost of drilling of hole of required diameter and depth as

mentioned in tender / manufacturer's specification, cleaning the hole with

required air blower and other necessary tools and tackles, positioning,

providing and grouting chemical, allied fixtures and fasteners etc. excluding

cost of reinforcemet bar etc completed. as directed by the engineer in

29 Making hole in RCC Beam with core cutting including of drilling, anchoring 75.00 No. 1434.20

etc. (Considering depth upto 14") and diameter of hole is 125mm dia.

30 Providing and laying brick work using common burnt clay building 1955.00 Cum 4444.05

conventional type bricks having crushing strength not less than

Kg/sq.cm. in super structure above plinth level upto floor two level in

cement mortar 1:6 (1 cement : 6 fine sand) for All Floor including the cost of

all materials and labour charges etc. complete.

31 Providing and laying half brick work using common burnt clay building 3316.00 Sq.m. 676.70

conventional type bricks having crushing strength not less than

Kg/Sq.cm in cement mortar 1:4 (1 cement : 4 coarse sand) in super

structure above plinth level for all floors including the cost of all materials

and labour charges etc. complete.

32 Providing 15mm thick smooth cement plaster in single coat on rough 17835.00 Sq.m. 266.46

(similar) side of single or half brick walls for interior plastering and finished

even and smooth in cement mortar 1:3 (1 cement : 3 sand) etc. complete

for all floors.

33 Providing 10 mm thick cement plaster in single coat on fair side of brick / 10913.00 Sq.m. 249.05

concrete walls for interior plastering and finished even and smooth in

cement mortar 1:3 (1 cement : 3 sand) including finishing with a floating

coat of neat cement slurry etc. complete for Ceiling for all floors.

34 Providing 20 mm thick waterproof cement plaster for sunk in single coat on 933.00 Sq.m. 333.04

brick / concrete walls for interior plastering finished even and smooth in

cement mortar 1:3 (1 cement : 3 sand) and mixing water proofing materials

of approved brand and manufacture in C.M. in proportion recommended by

the manufacture and finished with a floating coat of neat cement slurry for

35 Providing 20 mm thick sand faced cement plaster with gutkha finish with 1 9065.00 Sq.m. 357.91

cm x 1 cm grooves on walls for all heights above ground level consisting of

12mm thick backing coat of cement mortar 1:3 (1 cement : 3 sand) and

8mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand) including making

necessary cornices as directed etc. complete for all heights.

36 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 1094.00 Rmt. 42.70

37 Providing & fixing the Chicken wire mesh (16 x 24) of approved size 367.00 Sq.m. 204.22

applying between the RCC and masonry junction in proper line, level and

plumb with all material, labour, tools, tackles and equipment including fixing

the jali with nails, etc complete as directed by the Engineer-in-charge.

38 Providing & fixing elevation facia cladding of 6" x 3" inch size 15 to 20mm 1025.00 Sq.m. 4040.00

thickness with quality for elevation treatment on vertical wall with 15 mm

thick single coat 1:6 cement plaster for leveling fixing the tiles on the face

with Roff stone tiles adhesive made up of blended powder polymer

modified cement based tiles adhesive applied strictly as per laying process

recommended by manufactures in 3 to 4mm thick paste layer on wall and

on back side of tiles fixed in true line & level without leaving any joints open

including cleaning, curing etc. complete as per directed by engineer in

It. Item of Work Qty. Unit Rate in Amount

39 Providing and fixing double shutter M.S. door having frame of MS 9.00 Sq.m. 7976.98

rectangular section of size 35 x 100 x 3mm @ 6.063 kg weight per meter,

Nos. horizontal struts of size 25 x 25 x 3mm @ 2.04 Kg weight per meter

and 19mm marine ply with edge beading & laminate on both side including

necessary fixtures and fastenings, fabrication, two coat oil painting

including primer coat etc. complete as detail and as directed by engineer in

40 Providing and fixing side hung double shutter door having factory fabricated 69.00 Sq.m. 4225.84

standard extruded colour anodized hollow section frame and having 35 mm

thick flush door with both the side 1 mm thick laminated sheet and glass fix

at top with alluminium 'U' type beading, colour, pattern & design of which is

to be approved by the architect including all necessary S.S. fixtures &

fastenings etc. complete as directed by Engineer-in-charge.

41 Providing and fixing side hung single shutter door having factory fabricated 47.00 Sq.m. 5477.23

standard extruded colour anodized hollow section frame and having 35 mm

thick flush door with both the side 1 mm thick laminated sheet and glass fix

at top with alluminium 'U' type beading, colour, pattern & design of which is

to be approved by the architect including all necessary S.S. fixtures &

fastenings etc. complete as directed by Engineer-in-charge.

42 Providing & fixing double shutter door having granite frame with all open 104.00 Sq.m. 6626.61

edges machine cut & machine polished, fixed by zinc coated hinges with

double shutter of factory made & stamped I.S 12823 grade one, type one

35 mm thick solid core, melamine faced, three layered resin, flushed door,

having decorative lamination on both sides & 12 mm thick T.W. beading

fixed around the door from "novapan" or equivalent company holding

license for minimum 5 years etc. complete including all fixtures & fastening

as detail and as directed by engineer in charge for all floors.

43 Providing & fixing single shutter door having granite frame with all open 116.00 Sq.m. 7270.99

edges machine cut & machine polished, fixed by zinc coated hinges with

single shutter of factory made & stamped I.S 12823 grade one, type one

mm thick solid core, melamine faced, three layered resin, flushed door,

having decorative lamination on both sides & 12 mm thick T.W. beading

fixed around the door from "novapan" or equivalent company holding

license for minimum 5 years etc. complete including all fixtures & fastening

as detail and as directed by engineer in charge for all floors.

44 Providing and fixing FRP frame size 100 x 50 mm and 35mm thick FRP 110.00 Sq.m. 2377.76

with glass fix at top depress panel shutter having extra reinforcement on

sides & edges in gel coat finish. The core of the shutter & frame is to be

filed up with injected fire retardant grade polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also taking hinges &

fixtures. The whole FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of

S.S hinges with necessary screws & alluminium fixtures & fastenings &

fastener sleeve.

45 Providing and fixing window having extruded alluminum colour anodized 372.00 Sq.m. 1583.95

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of

Kg/mt, horizontal Three track member size 92mm x 31.75mm x 1.30mm, @

Wt.1.07 Kg/mt, vertical member of size 92mm x 31.75mm x 1.50mm @ Wt.

1.06 Kg/mt with sliding shutters of horizontal member size 40 mm x 18mm x

1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x

1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc. complete

for all floors.

It. Item of Work Qty. Unit Rate in Amount

46 Providing and fixing window having extruded aluminum colour anodized 44.00 Sq.m. 1713.70

section frame main outer size 63.50 x 38.10 x 1.95 mm (@ Wt 1.094 Kg /

Rmt), horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm

(@ wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x 31.75mm x

mm (@ wt.of 0.659 Kg/mt) with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm (@ wt. of 0.456 Kg/mt), vertical member of size

with 5 mm thick transparent bronze colour tinted float glass with anodized

aluminum fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details as directed by Engineer in charge for all floors.

47 Providing and fixing window having Three shutter sliding window (3 shutters 11.00 Sq.m. 6141.81

+ 1 mosquito net shutter) standard extruded colour anodized alluminium

section equivalent to jindal series E (30mm) sections numbered : frame-

bottom with weep holes- 20928, frame top & side - 20837; shutter top &

bottom- 20993, shutter inter lock - 20550, shutter side (handle) -

with 5 mm thick transparent tinted float glass, with EPDM rubber gasket, air

lock strip and finishing joints with silicon sealant, with powder coated

standard alluminium fittings with mosquito net provision as per details

complete including all fixtures & fastening as detail and as directed by

engineer in charge.

48 Providing and fixing window having Two shutter sliding window (2 shutters 162.00 Sq.m. 7384.11

+ 1 mosquito net shutter) standard extruded colour anodized alluminium

section equivalent to jindal series E (30mm) sections numbered : frame-

bottom with weep holes- 20928, frame top & side - 20837; shutter top &

bottom- 20993, shutter inter lock - 20550, shutter side (handle) -

with 5 mm thick transparent tinted float glass, with EPDM rubber gasket, air

lock strip and finishing joints with silicon sealant, with powder coated

standard alluminium fittings with mosquito net provision as per details

complete including all fixtures & fastening as detail and as directed by

engineer in charge.

49 Providing & fixing in position colour anodized Aluminium sectional 16.00 Sq.m. 3741.04

ventilators with louvers with anodized section 65 x 25 (@ Wt.

Kg/Rmt) using 3 mm thick Bajari Figured Adjustable glass louvers of

standard make fixed in alluminium channel and including anodized

alluminium fixtures and fastenings with coach bolts etc. complete (colour as

directed by Engineer in charge).

50 Providing & fixing in position colour anodized Aluminium sectional 92.00 Sq.m. 2922.94

ventilators with louvers with anodized section 63.50 x 38.10 x 1.95 mm (@

Wt. 1.094 Kg/Rmt) using 5 mm thick transparent tinted louvers glass of

standard make fixed in alluminium channel and including anodized

alluminium fixtures and fastenings with coach bolts etc. complete as

directed by Engineer in charge.

51 Providing and fixing standard extruded of alluminium section of size 63.50 x 213.00 Sq.m. 1525.00

38.10 x 1.95 mm @ Wt 1.094Kg / Rmt with colour anodized alluminium

frame with 5 mm thick transparent bronze colour tinted float glass as details

etc. complete for fix ventilation.

52 Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix 75.00 Sq.m. 725.97

(1- Cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size)

reinforced with 1.6 mm dia. mild steel wire including roughening, cleaning,

fixing and finishing in cement mortar 1:3 and curing complete. (C) 25mm

53 Providing and fixing M.S. grill / M.S. door of required pattern to wooden 23856.00 Kg. 111.10

frame bar of windows/ brick masonry with necessary M.S. angle, M.S. pipe,

M.S. flats and other structural steel at required spacing and frame around

square or round bars with round headed bolts and nuts or by screws

including cutting welding and applying one coat of primer and two coats of

oil with enamel paint fabrications etc. complete as directed.

It. Item of Work Qty. Unit Rate in Amount

54 Providing and fixing rolling shutters of approved make made of 80 mm wide 129.00 Sq.m. 3831.94

M.S. laths inter-locked together through their entire length and jointed

together at the ends by end locks mounted on specially designed pipe shaft

with bracket plates, guide channels and arrangements for inside and

outside locking with push-pull operation including the cost of hood cover

and spring, red lead primer coat and two coats of oil painting etc. complete.

(A) Shutters having width below 3.5 M.

55 Providing and fixing machine cut, free edges, machine mirror polished 1137.00 Sq.m. 3524.90

granite stone slab 15 to 18 mm thick (single piece not more than 240 cm)

for Doors / Windows Sill and Jambs cladding as per design including full

moulded round front edge and 1 cm nosing and laid on 20 mm thick

cement mortar 1:6 (1 cement : 6 coarse sand) jointed with grey cement

slurry including rubbing and polishing finishing etc. complete.

56 Providing and fixing 24 gauge S.S. wire mosquito jali using Aluminium 91.00 Sq.m. 1464.50

section with anodized section 63.50 x 38.10 x 1.95 mm (@ Wt.

Kg/Rmt) etc. complete with all labour and materials.

57 Providing and laying 60 x 60 cm Antiskid / Matt finished Vitrified 8 to 10 mm 1561.00 Sq.m. 1744.91

thick tiles flooring over 20mm (average) base of cement mortar 1:6 (1-

cement : 6-coarse sand) on new surface jointed with colour epoxy joint filler

of minimum 3mm including finished with flush pointing & cleaning the

surface etc. complete.

58 Providing and laying Vitrified 8 to 10 mm thick tiles in skirting, riser of steps 122.00 Sq.m. 1889.45

and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand)

and jointed with epoxy joint filler of minimum 3mm including finished with

flush pointing & cleaning the surface etc. complete.

59 Providing & fixing machine cut, free edges, machine mirror polished 15 to 554.00 Sq.m. 3733.97

18 mm thick granite stone in single piece with 1 cm nosing & necessary

grooves on tread in flooring and in skirting with required pattern as directed

over 20 mm (average) thick base of cement mortar 1:6 (1 cement :

coarse sand) finished with flush pointing and jointed with white cement

slurry mixed pigment to match with shade of stone polishing complete.

60 Providing and laying 60 x 60 cm hand dressed mirror polished blue kotah 3391.00 Sq.m. 1001.14

stone flooring of even grade over 20mm (average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) laid over and jointed with grey

cement slurry mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

61 Providing and laying 25mm thick hand dressed mirror polished blue kotah 178.00 Sq.m. 1149.52

stone slab in risers of steps, skirting, dedo and pillars laid on 10mm thick

cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with gray cement

slurry mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete.

62 Providing and laying 30 x 45 cm Ceramic tiles 6mm to 8mm thick in skrting 460.00 Sq.m. 1022.34

risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement slurry.

63 Providing and laying 30 x 30 cm size 6 mm to 8 mm thick standard Ceramic 280.00 Sq.m. 983.20

tiles in flooring laid on a bed of 12 mm thick cement mortar 1:3 (1 cement :

3 coarse sand) finishing with flush pointing in white cement etc. complete.

Colour and shade approved by Engineer-in-charge.

64 Providing and laying Colour glazed tiles size 30 x 45 cm and 6 to 8 mm 1307.00 Sq.m. 1477.25

thick in skirting risers of steps and dedo on 10 mm thick cement plaster 1:3

(1 cement : 3 coarse sand) and jointed with colour cement slurry etc.

complete. Colour and shade approved by Engineer-in-charge.

It. Item of Work Qty. Unit Rate in Amount

65 Providing and laying water proofing treatment with china mosaic tiles 3238.00 Sq.m. 1058.48

flooring over avg 40 mm C.C. 1:2:4 {1 Cement : 2 sand : 4 Kapachi / Grit

to 12 mm size} bedding for maintaining slope for plain and curve surface &

12 mm to 20 mm of broken piece of ceramic / glazed tiles (one for more

color as directed) to be laid over cement mortar bedding of C.M. 1:3 (1

cement : 3 sand) containing one Kg of water proofing materials per bag of

O.P.C. at plain or / and slops and to be tempered to bring mortar ceramic

up to surface with using white cement and colour pigment including

rounding of junctions and extending them up to 15 cm along the wall and

curing with bends any patterns or design as per drawing and cleaning by

using oxalic acid etc. complete.

66 Providing and fixing precast Rubber Dye / steel Dye inter locking concrete 1293.00 Sq.m. 704.07

block 60mm thick with grade of concrete M-300 pneumatic compressed /

vibrated mechanically and as per approved design confirming to IS 15658 :

2006 including 35 mm sand layer for levelling and filling the joint with sand

in proper line and level as per guidelines of IRC : SP 63-2018 etc.

67 Providing and fixing precast concrete kerb stone of grey cement based 442.00 Rmt. 370.68

concrete block 30cm length, 30cm height and 15cm thick of M-250 grade

concrete as per approved design and including excavation for fixing in

proper line and level, filling the joint with C.M. 1:3 (1 cement : 3 fine sand)

etc. complete as directed by Engineer in charge.

68 Providing and fixing False ceiling at all heights having 15 mm thick integral 3288.00 Sq.m. 1674.15

densified edges (for extra Strength to prevent tiles from installation

damages) Tegular/board edged 100% eco friendly light weight calcium

silicate false ceiling tiles having Non cementitious calcium silicate

reinforced with fibre and natural filler with a eco-friendly recycled content of

more than 50%. False ceiling tiles of Size 595x595 mm of approved

texture, design and patterns Viz Spintone/ Cosmos/ Spectra /Globe having

NRC (Noise Reduction coefficient) of 0.50 to 0.75 (for semi perforated and

fully perforated range of tiles), Light reflectance of 85% (minimum). Non-

combustible as per BS: 476 (part-4), fire performance as per BS: 476 (part

6 &7 (High Fire resistivity for very high fire safety), humidity resistance of

100% RH (Suitable for any weather conditions, Thermal conductivity of

0.048 W/m°KC to 0.050 W/m°KC as per IS 3346/1980 (High Thermal

Insulation). 100% Antifungal, Antibacterial, Anti termite(to prevent

secondary Infection & Speedy Patient recovery).

The ceiling tiles should be free from chemicals, asbestos having Zero VOC

Property for better indoor Air quality required for Speedy recovery of

patients and zero suffocation. The tiles shall have average body density of

370 kg/m³ as per ECBC code 2007 and average edge density of

Kg/m3. The tile shall be primer coated on both sides and the fair surface

shall be having a factory finish in two coats of white dispersion type solvent

69 Constructing Sand witch platform using 18 mm thick Polished Black Granite 116.00 Sq.m. 5511.57

at top and 25 mm thick kota slab using C.M. 1:3 for sandwich and fitting at

bottom & edges with water proof rigid adhesive including making necessary

grooves in walls with vertical kota stone 30mm x 2 Nos. Sandwitch thick

every 60cm centre to centre including all labour & material of approved

quality including full moulded round front edge fixed in wall for partition and

jointed with grey cement slurry including rubbing, polishing & cutting holes

for fixing kitchen sink etc. complete as directed by Engineer in charge for all

70 Providing and fixing Stainless steel Kitchen Sink Glossy ASIS 304 grade 47.00 No. 1958.39

and 1 mm thick with over all size 610 x 460 x 33 and bowl size 560 x 410 x

190 mm with all fittings with C.I. or M.S. brackets painted white/ or fixing on

stone base including cutting holes and making good the same, brass waste

and M.I. fisher union fittings including all necessary fittings.

It. Item of Work Qty. Unit Rate in Amount

71 Providing and laying both side machine polished Granite Stone slab 18 to 7.00 Sq.m. 2334.11

20 mm thick average thick of approved quality including full moulded round

front edge fixed in wall for urinal partition and jointed with white cement

slurry including rubbing, polishing & finishing etc. complete.

72 Distempering (three coats) with oil bound distemper of approved brand and 17992.00 Sq.m. 104.85

manufacture and of required shade on wall surfaces to give an even shade,

over and including a priming coat with distemper primer of approved brand

and manufacture after thoroughly brushing the surface free from mortar

dropping and other foreign matter and also including preparing the surface

even and sand papered smooth.

73 Distempering (three coats) with oil bound distemper of approved brand and 10913.00 Sq.m. 113.17

manufacture and of required shade on Ceiling surfaces of slab to give an

even shade, over and including a priming coat with distemper primer of

approved brand and manufacture after thoroughly brushing the surface free

from mortar dropping and other foreign matter and also including preparing

the surface even and sand papered smooth.

74 Finishing wall with weather proof exterior acrylic emulsion paint of standard 14870.00 Sq.m. 117.40

company colour and shade approved by the Architect on wall surface (two

coats) to give an required shape even shade over and including a primary

coat with alkaly resistance primer of approved brand after thoroughly

brushing the surface to remove all dirt, dust and remains of loose powdered

materials etc. complete

75 Providing and fixing 0.90m high Stainless steel hand railing having top row 46.00 Rmt. 5153.02

of 50 mm dia hand rail 304 grade (16 Gauge) stainless steel railing pipe

and 2 horizontal 16mm railing pipe and with vertical supports 50mm dia.

hollow stainless steel pipes at 0.9mt c/c distance as intermediate members

running through stainless steel 50 mm dia 304 grade (16 Gauge) hollow

pipe having threaded screw/ welded and at end 300mm extension beyond

railing for which the measurement will not paid separately including cutting,

bending, welding & fabrication the structure as per drawing including

finishing etc. complete as per NBC guideline or instruction of Engineer in

76 Providing and fixing 1.20m high Stainless steel hand railing having top row 124.00 Rmt. 6015.56

of 50 mm dia hand rail 304 grade (16 Gauge) stainless steel railing pipe

and 3 horizontal 16mm railing pipe and with vertical supports 50mm dia.

hollow stainless steel pipes at 0.9mt c/c distance as intermediate members

running through stainless steel 50 mm dia 304 grade (16 Gauge) hollow

pipe having threaded screw / welded and at end 300mm extension beyond

railing for which the measurement will not paid separately including cutting,

bending, welding & fabrication the structure as per drawing including

finishing etc. complete as per NBC guideline or instruction of Engineer in

77 Providing and fixing Stainless steel hand rail made from anticorrosive 304 228.00 Rmt. 1914.96

grade SS pipe of 50 mm dia. (16 Gauge) at upper portion of RCC parapet

wall and using stainless steel supports fitted in parapet wall at every 1.0 mt

distance with 32 mm dia vertical connecting SS pipe including SS dish type

cover and accessories as per drawing as directed etc. complete.

78 Providing and fixing Railing made up of Partly 10 cm wide R.C.C. Parapet 102.00 Rmt. 2513.89

upto 75 cm. high including necessary form work but excluding

reinforcement and upper portion fitted with 50mm dia. round hollow M.S.

pipe hand rail with 35mm dia. vertical connecting M.S. Pipe at every

mt. distance including necessary welding etc. complete as per detailed

drawing as directed by Engineer-in-charge.

79 Providing, erecting and fixing double coated PVC (ISI) mark water tank of 40000.00 Litre 3.95

required capacity each with all necessary fittings and connection

etc.complete on terrace.

It. Item of Work Qty. Unit Rate in Amount

80 Providing, laying in true line and level I.S.I. mark 50 mm dia. U.P.V.C (Sch- 364.00 Rmt. 445.54

40) for cold water including fitting of equivalent make or as approved by

Engineer in charge. Pipe shall be fixed on the wall with held of clamp at

every two meter c/c shall be concealed as directed including necessary

fitting etc. including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials. (i) 50mm dia.

81 Providing, laying in true line and level I.S.I. mark 40 mm dia. U.P.V.C (Sch- 408.00 Rmt. 148.12

40) for cold water including fitting of equivalent make or as approved by

Engineer in charge. Pipe shall be fixed on the wall with held of clamp at

every two meter c/c shall be concealed as directed including necessary

fitting etc. including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials. (i) 40mm dia.

82 Providing, laying in true line and level I.S.I. mark 25 mm dia. U.P.V.C (Sch- 392.00 Rmt. 91.84

40) for cold water including fitting of equivalent make or as approved by

Engineer in charge. Pipe shall be fixed on the wall with held of clamp at

every two meter c/c shall be concealed as directed including necessary

fitting etc. including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials. (ii) 25mm dia.

83 Providing, laying in true line and level I.S.I. mark 15 mm dia. U.P.V.C (Sch- 548.00 Rmt. 72.65

40) for cold water including fitting of equivalent make or as approved by

Engineer in charge. Pipe shall be fixed on the wall with held of clamp at

every two meter c/c shall be concealed as directed including necessary

fitting etc. including testing of pipe and joints and fixing the same with

adhesive solvent including cost of all materials. (i) 15mm dia.

84 Providing and fixing heavy duty 50 mm.dia. Handle valve of approved 24.00 No. 909.00

85 Providing and fixing heavy duty 40 mm dia. Handle valve of approved 21.00 No. 555.50

86 Providing and fixing heavy duty 25 mm dia. Handle valve of approved 72.00 No. 454.50

87 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100mm 97.00 No. 585.37

diameter with jali of the following nominal diameter of self cleansing design

with C.I. screwed down or hinged grating including the cost of cutting and

making good the walls.

88 Providing and fixing S.W. gully trap with C.I. grating brick masonary 30.00 No. 1246.92

chamber and water tight C.I. cover with frames of 300mm x 300mm size

(Indian) with standard weight (i) square mouth traps (ii) 150mm x 100mm

size 'P' or R type.

89 Providing and fixing screw down bib cock with wall flange push taps of 99.00 No. 986.28

following size (A) Brass chromium plated screw down bib tap. (i) 15mm dia.

of approved brand as directed by Engineer in charge.

90 Providing and fixing chromium plated brass exposed part kit of concealed 75.00 No. 883.75

stop cock & flush cock with fitting sleeve, operating lever & adjustable wall

flange with seal of approved brand as directed by Engineer in charge

including fixing in pipe line etc. complete.

91 Providing and fixing Chromium plated brass screw down Angular stop cock 84.00 No. 938.50

with wall flange of approved brand as directed by Engineer in charge

including fixing in pipe line etc. complete (ii) 15 mm dia.

92 Providing and fixing wash basin of approved brand with single hole for pillar 48.00 No. 4426.83

tap with C.I. or M.S. brackets painted white including cutting holes and

making good the same and including pillar cock of 15mm dia., C.P.brass

waste 32 mm dia, Stop cock 15 mm dia, waste pipe for 32mm dia coupling

& supply pipe as directed by Engineer in charge (A) Vitreous China (ii) Flat

back wash basin 540 mm x 400 mm size.

It. Item of Work Qty. Unit Rate in Amount

93 Providing and fixing wash down water closet (European type, W.C. Pan) 62.00 No. 6817.50

branded product with integral P or S trap flushing cistern, seat cover etc.

complete approved by engineer in charge including installing and fitting as

per manufacture standard by skilled trained workman including testing etc.

94 Providing and fixing urinal of approved quality & brand including connecting 15.00 No. 4941.93

the urinal with waste pipe tap etc. complete. (A) White earthenware flat

back or corner type size 430 mm x 260 mm x 350 mm including fixing CP

brass waste pipe white earthen ware flat back or corner type size 130 x

x 350mm & 15 mm dia. brass screw down stop cock etc. completed as

directed by Engineer in charge.

95 Providing and fixing 600 mm x 450 mm beveled edge mirror of superior 62.00 No. 854.58

glass mounted on 6 mm thick A.C sheet or plywood sheet or PVC framing

and fixed to wooden plugs with C.P. brass screw and washers.

96 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets 62.00 No. 616.42

fixed to wooden plugs with C.P. brass screws.(B) 600mm x 20mm size.

97 Providing and fixing Flush lever of approved brand and quality or equivalent 10.00 Nos. 1833.15

as per directed in charge.

98 Grab bar "L" shape of approved brand and quality equivalent as directed by 10.00 Nos. 1515.00

engineer in charge.

99 Providing and fixing Grab rail 600 mm of approved brand and quality 10.00 Nos. 3030.00

equivalent as directed by engineer in charge.

100 Providing and fixing Grab bar folding of approved brand and quality 10.00 Nos. 5050.00

equivalent as directed by engineer in charge.

101 Providing & fixing of conspectus tape 50mm width on of treads in staircase 289.00 Rmt 75.75

including cutting pasting etc. as per harmonised guidelines complete in all

respect to the entire satisfaction of engineer in charge.

102 SIGNAGES of Braille lipi 50.00 Nos. 787.80

Providing & fixing wall signage's using Alluminum Alloy 3003 grade finish

plate of 1 mm thick fixed on a wall using S.S. studs including punched

(laser cut) lettering carried out on s.s. plate of required size and text as

directed by Engineer over the Alluminum plate etc. complete. Size: 18" x

103 Providing and laying 30mm thick Tactile tiles in flooring, treads of steps and 79.00 SqMt. 1998.02

landing laid over 20mm (average) thick base of cement mortar 1:6 (1-

cement :6-coarse sand) laid over and joined with white cement slurry

including finishing with flush pointing and cleaning the surface etc.

104 Providing & fixing tactile layout plan of size 900mm x 600mm as approved 5.00 No. 38380.00

design, made of 3.0mm thick acrylic non glare base plate and non glare cut

out symbols with Braille on which Individual facility points, like Inquiry,

reception, restrooms, medical room/first aid, cafeteria or breakout area,

lounge, meeting room, conference room etc. present the respective floors

with pictograph wherever needed all in tactile raised by minimum of 1.0mm

to 2mm in various colours to make it legible for seniors, partial vision

Impaired etc. All the facility names should be in Braille, along with English

or Hindi. The entire block of tactile sighs should be mounted on wall for

easy reading. The map to be installed at specified locations and installed at

a height of 800mm from ground level complete in all respect as per

Harmonized guideline & satisfaction of Engineer in charges.

It. Item of Work Qty. Unit Rate in Amount

105 Providing and fixing of acrylic, non-glare, tactile audio pictorial building 5.00 Nos 50500.00

layout as per the approved size, design and make, having 3mm thick

acrylic non glare base plate of the approved colour and non-glare acrylic

cut out symbols raised 3mm above base plate and Grade 2/ Grade 1 Braille

to be integral with the sign face and be raised 0.5mm above base plate.

The map to be installed at the specified location as per accessibility

standards, shall be oriented to the position of the viewer and to be installed

at a height of 800 mm from the finished ground/ floor level and using the

necessary hardware specified by the manufacturer and to be installed up to

the height of 800 mm from the finished ground/ floor level and using the

necessary hardware specified by the manufacturer and to be installed

complete as per design / specifications and guidelines as per the entire

satisfaction of the Engineer-in-charge.

106 Providing and fixing acrylic multilingual Braille (raised dots) DIRECTIONAL 25.00 Nos 1969.50

SIGN BOARDS of size 225 x 150mm designed as per accessibility

standards and having 3.5mm thick acrylic base plate with Upper Case San

Serif words made of white acrylic non glare cut out letters of height 15mm

raised not less than 0.8mm above base plate and the equivalent word

written in Hindi with Devanagari non glare acrylic letters of height 15mm

raised not less than 0.8mm above base plate and having a non-glare

acrylic cut arrow pointing in the required direction. Each signboard to be

fixed as per manufacturers specifications on the wall at the approved

location and at a height of 1200mm from FFL complete as per design /

specifications and guidelines as per the entire satisfaction of the Engineer -

107 Providing and fixing Braile Indicator of size 170 mm x 35mm for handrails of 25.00 Nos 959.50

the approved design and make have Braile Dots raised 0.5 mm above base

plate to be installed at specific locations as per direction of Engineer in

108 Providing, laying and jointing in true line and level UPVC SWR pipe Type B 550.00 Rmt. 735.34

pipe confirming to IS 13592 -1992 with one end plain and other end

socketed with rubbering & fitting confirming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the

size 160mm diameter x 210mm length x 196mm high at every 2000mm

center to center or shall be concealed in wall as directed including

necessary fitting such as bends, shoes etc. including testing of pipe and

joints and jointed with adhesive solvent cement including cost of all

materials. (i) 75 mm dia.

109 Providing, laying and jointing in true line and level UPVC SWR pipe Type B 550.00 Rmt. 856.03

pipe confirming to IS 13592 -1992 with one end plain and other end

socketed with rubbering & fitting confirming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other

with rubber lubricant,pipe shall be fixed on wall using of PVC clamp of the

size 160mm diameter x 210mm length x 196mm high at every 2000mm

center to center or shall be concealed in wall as directed including

necessary fitting such as bends, shoes etc. including testing of pipe and

joints and jointed with adhesive solvent cement including cost of all

materials. (ii) 110 mm dia.

110 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working 1030.00 Rmt. 339.05

pressure poluthene pipes of the following outside dia. low density, complete

with special falnge compression type fittings, wall clips etc. including

making good the wall ceiling and floor. (G) 110 mm.

111 Providing & fixing special type Clamping System made out from C-Patti, Z- 220.00 No. 177.76

Patti, L-Clamp, U-Clamp with nut/bolt and washers as suitable arrangement

for water supply and plumbing systems like drainage line, rainwater line &

supply line for hot and cold water etc line fixing from GF to Terrace floor as

per site condition for fixing etc. complete for 110 mm dia. pipe.

It. Item of Work Qty. Unit Rate in Amount

112 Providing & fixing special type Clamping System made out from C-Patti, Z- 125.00 No. 160.59

Patti, L-Clamp, U-Clamp with nut/bolt and washers as suitable arrangement

for water supply and plumbing systems like drainage line, rainwater line &

supply line for hot and cold water etc line fixing from GF to Terrace floor as

per site condition for fixing etc. complete for 75 mm dia. pipe.

113 Providing and fixing in position PVC cowel vent to pipe 75mm dia. as 62.00 No. 393.04

114 Providing and fixing in position PVC cowel vent to pipe 110mm dia. as 32.00 No. 505.17

115 Providing, laying and jointing in true line and level 160 mm diametre 440.00 Rmt. 1106.96

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and

other end socketed with rubber ring, & fittings conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 160 mm diametre x 149 mm length x 145 mm heigh

at every 2000 mm center to center or shall be concealed in walls as

directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

116 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. 111.00 Cum 615.57

thickness including watering, ramming and consolidating etc. complete.

117 Steel work, riveted in built up sections framed work including cutting, 5.00 Qtl. 5889.50

hoisting, fixing in position and applying a priming coat of read lead paint.

(A) In beams and joists, channels angles tees, flats, with connecting plates

or angle cleats as in main and cross beams. Hip and jack rafters, purlins

connected to common rafters and the like.

118 Providing and fixing Alluminium Composite Panel of ALSTRONG or 42.00 Sq.m. 2936.07

equivalent brand with approved shade of 4 mm thick (0.5+3+0.5). The

Composite panel should be made of 3mm thick 100% virgin poly thene

core of LDPE sandwitched between two skins of 0.5mm thick Alluminium

sheet of which one side is having three layers of PVDF coating with Kyanar

500 paint to ensure the superior corrosion resistance and weatherability

and the other side is service coated with Epoxy paint (Grey). The adhesive

used DUBOND for bonding the two skins which can take 8 to 9 Kg. of

weight to separate. This includes structural frames for fixing and finishing

119 Providing and fixing Steel cupboards in wall with steel frames and shutters 364.00 Sq.m. 3583.48

using 18 gauge M.S. steel sheet including four horizontal 25mm kotah

shelves and necessary fixtures, fastening like locks handles, hinges with

approved shade of sparay painting etc. complete as directed.

120 Providing and fixing in position 300mm high, 150mm wide English / Gujarati 120.00 No. 707.00

letters made from 1.0mm thick stainless steel sheet as directed by

Engineer in charge with all material, hardware, accessories and fittings etc.

121 Providing and fixing in position 150mm high, English/Gujarati letters made 250.00 No. 404.00

from 1.0mm thick stainless steel sheet as directed by Engineer in charge

with all material, hardware, accessories and fittings etc. complete.

122 Providing and fixing Signages (Acrylic Name Plates) having size of 315 x 540.00 No. 353.50

200 x 5 mm thick displaying names of offices, room, toilet, passage etc.

having fonts, colour as directed by the Engineer in charge.

123 Earth work for embankment including breaking clods, dress in with all lead 3889.00 Cum 228.27

and lift including watering and consolidation (A) From borrow area within all

124 Rolling of earthwork in layers with power roller including filling in 3888.80 Cum 22.89

depressions which occur during the process & watering of earthwork etc.

complete as directed by Engineer in charge.

125 Box cutting the road surface to proper slop and camber for making a base 1745.00 Cum 212.58

of road work including removing the excavated stuff and depositing on the

road side slope as directed for all lead and lift.

It. Item of Work Qty. Unit Rate in Amount

126 Supplying and laying, spreading and compacting of hard stone of following 729.00 Cum 2392.69

nominal size including carraige of material spreading in uniform layers

manually on prepared base and compacted with power roller to achieve

desired density including all materials - WBM using 40 to 63 mm size B.T.

metal and 25% stone dust for binding material, labours etc. complete. as

127 Providing and laying controlled cement concrete M-200 for trimix cement 883.00 Cum 5134.84

concrete road and curing complete including cost of formwork but excluding

cost of reinforcement for RCC road by using floater, vaccume, dewatering

process incl. making groove for joint ct. 5 m c/c & at full depth of the

thickness and 5 to 10 mm wide by diamond cutter and filling the joints with

polysyphide etc. complete.

128 Supplying premoulded bituminous joint filler. (i) 12mm thick. 3.00 Cum 553.79

129 Supplying and fixing reinforced concrete heavy duty non-pressure pipes 658.00 Rmt. 1095.18

with collars for culverts including setting and joining the pipes in C.M. 1:2

watering and laying (To level of slops of I.S. 458 / 1971 Class NP3 casted

by vertically vibrated technology of following internal diameter. (i) 300 mm

130 Filling around the pipes with murrum including dressing, tampering etc. 203.00 Cum 82.83

131 Direction sign (Junction board) :- Providing and fixing sing boards made out 4.00 No. 14831.71

of 2mm aluminium sheet size 244 x 122cms. rectangle as per the design of

IRC-67-1977 pre treated with phospheting process & acid etching; coated

with one coat of epoxy primer and two coats of best quality epoxy paint;

reflectorised with retro reflective sheeting as per latest M.O.S.T.

Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m

long (2 nos) stand post and frame fabricated from suitable size iron angle

of 50 x 50 x 5mm, 75 x 75 x 6mm as required; painted with best quality

epoxy coatings in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x

45 x 60cms. for each leg including excavation curing etc. complete under

the supervision of engineer in charge.(A) Engineer Grade.

132 Structural steel work (Confirming to IS 4923-1997) riveted, bolted or welded 8840.00 Kg. 134.33

in builtup for all type sections, in framed work, including cutting, hoisting,

fixing in position and applying a priming coats of approved steel primer and

two coat of oil painting over primer all complete as per the structural

designs and directions of Engineer in charge. Column.

133 Steel work, welded in built up sections framed work including cutting, 22100.00 Kg. 94.94

hoisting, fixing in position and applying a priming coat of read lead paint.

(A) In beam and joists, channels, angles, tees, flats, with connecting plate

or angle cleat as in main and cross beam. Hip and jack rafters, purlins

connected to common rafters and including painting two coats of oil

painting over primer coat etc. complete.

134 Providing and fixing of Ridge flashing for roof panel shall be made out of 438.00 Sq.m. 867.39

0.5 mm thick pre coated GI sheet. The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS 14246:1995 and shall have

zinc coating of minimum 120 gsm as per IS:277:1992, 5-7 microns epoxy

primer on both side of the sheet and polyester top coat 15-18 micron. The

PPGI Sheet shall have plastic protective guard film of minimum 25 microns

to avoid scratches during transportation. The ridge shall be fixed to the

steel members by pop rivet or self drilling/self stitching fastners @

maximum 450 mm c/c along length of capping/flashing etc. complete.

135 Providing Transparent FRP sheet 2.0 mm roofing fixed with J-Bolt screw 446.00 Sq.m. 1131.20

filled with required material complete excluding the cost of purlins rafters

136 Drilling of 250/300 mm dia. bore in over burden strata in hard and rock 400.00 Rmt. 972.63

information by DTH rig including lowering of pipes and vertically and testing

etc including testing with Ben meter.

It. Item of Work Qty. Unit Rate in Amount

137 Reaming of 400 mm dia. for Pilot bore hole by mini DR ring in alluvium 400.00 Rmt. 297.95

strata complete upto 300m etc.

138 Providing and supplying in standard length ISI mark rigid unplasticised PVC 200.00 Rmt. 957.48

pipes suitable for potable water with ring fit joint including cost of rings, as

per IS specification no. 4985/1988 including all local and central taxes,

transportation, freight charges, octroi, inspection charges, loading,

unloading, conveyance to the departmental stores and including cost of

jointing meterial etc. complete. (3.1/B) Test Pressure 6 Kg/cm2 (9) 200mm

139 Providing and lowering of standared length ISI mark rigid unplasticised 200.00 Rmt. 2577.52

PVC slotted pipe including cost of jointing material etc. complete for

pressure 6kg/Cm2 and 200mm dia.

140 Clamps made from M.S. plate with 3 holes on either side with nuts & bolts 4.00 No. 1643.99

of standard make and suitable size (b) 750mm x 75 mm x 16mm flat to

141 M.S. Bail plug having length 0.45 mtr from medium class pipe as per I.S.S. 4.00 No. 851.04

suitable for (B) 200 mm dia pipe.

142 Providing and fixing bore cap suitable to 160 mm dia. PVC pipe. 4.00 No. 303.00

143 Bore plug having 100 mm height made from M.S. plate with 3 holes at 4.00 No. 782.57

equal distance on circumference for nut-bolts type, locking arrangement

with nuts-bolts & lock nuts of std. make complete.

(B) From 5 thick M.S. Plate (For Top also)

(ii) Suitable for 200 mm dia pipe.

144 Supply of best quality of well sorted Sevaliya gravel of size 4mm to 6mm. 277.00 Cum 2049.29

145 Supplying submersible pump set suitable for bore of 100 mm. dia. or more 4.00 No. 26441.80

having three phase motor capacity not more than 5 H.P. with following

capacity. (a) (25 stage) 120 to 125 LPM discharge at 155 to 120 mtrs. head

respectively suitable for 50 mm dia. delivery pipe. Cat.III

146 Supplying and erecting approved make motor controlled cubical panel 4.00 Set 9110.20

(direct- on- line) made from 16 gauge CRCA sheet duly epoxy powder

painted inside and out side with hinged doors and locking arrangements

consisting of suitable size of ON and OFF isolator (AC - 3/23 duty) main

fuses, single phasing preventor, indicator lamps for R-Y-B phase, over

loading relay. Automatic water level controller. Ammeter, Voltmeter, each

with two way selector switch incoming, wires duly socket crimpted, main

controller and over load relay. Start-Stop push buttons to be erected on

angle iron frame grouted on wall as directed. The isolator, Overload relay

and connector will be of L & T, Siemens or Cutler Hammer make only (a)

DOL up to 5.0 H.P.

147 Lowering of Submersible pump set complete with required no. & size of 4.00 Per 3030.00

casing pipes erected by means of proper chain pulley block & pipe Job

wrenches after checking of threads of each pipe with coupling to take the

load of the pump set and pipe assembly filled up with water. (b) Above

mtrs. and upto 120 mtrs.

148 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat 600.00 Rmt. 111.10

flexible Submersible copper cable approved make of following size. (b)

Core x 2.5 Sq.mm.

149 Providing and fixing gun metal check or non return fully wheel valve of 40 4.00 No. 663.43

150 Manufacture, Supply and delivery of following ISI marked H.D.P.E. Pipes 400.00 Rmt. 84.84

(IS:4984/1985 with latest amendment) having material Grade PE-80 in

approximate 100 mtr. Coil length or as per GWSSB requirement with SS-

316 Nipple at both end having 11 TPI threading as per specification, press

fitted and bolted having nominal diameter as under as per detailed

Technical Specification. Rates are based on IOCL Resin A Grade 45 GP

004DP44 as on dated 01.12.2017 Rs. 90284/- (Including GST) Rates are

Inclusive of GST. (iii) DN 50 PN-10.

It. Item of Work Qty. Unit Rate in Amount

151 Compressor test of tube well by Air Compressor of 900 CFM/200 PSI 24.00 Hour 8499.15

152 Supplying and installing mono block centrifugal pump as per IS standard 4.00 No. 18498.15

including foot valve reflux valve S.V. pressure gauge starter volt meter and

capacitor and base plate with tools etc. complete of 5.0 H.P. capacity

phase for 1350 LPM to 310 LPM.

153 Electrologger charges (With carting) (B) for other Deptt. and private work - 4.00 Job 12120.00

For Kachh area - Rs. 15000/- per job for other area Rs.12000/- per job.

154 Pumping test of the tubewell by sub. pump of adequate capacity in all 4.00 Job 17422.50

districts (A) 150/200/250 mm DTH bore pump set. For first 8 Hours with

Max. upto 20 HP Sub.Pump utilised.

155 Geophysical & Geohydrological ground water investigations for finalisation 4.00 Job 14428.86

of one pin point (With vehicle charges)

156 Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and 40.00 No. 207.66

painting with two coats of Anti-corrosive paint etc. complete.

157 Providing and fixing PVC Water Stopper of size 150mm wide & 5mm thick 288.00 Rmt. 151.50

at Construction joint etc. complete as directed by Engineer in charge.

158 Providing and laying white glazed tiles 6mm thick in flooring, treads of steps 80.00 Sq.m. 939.18

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand) finishing with flush pointing in white cement.

159 Providing and fixing SFRC Manhole cover 0.60 M. x 0.60M. Size. 4.00 No. 1530.15

160 Providing & erecting open well horizontal mono block pump set with cast 4.00 No. 25502.50

iron body, complete for three phase submersible motor having [F] For

HP 3 phase open well horizontal mono block pump set suitable for

LPM to 940 LPM @ 15 to 36 MTR head suitable for 65/80 mm dia. delivery

161 Providing and fixing brass Foot Valve as per engineer incharge. 4.00 No. 161.60

162 Demolition of brick work and stone masonry including stacking of 1153.00 Cum 564.16

serviceable materials and disposal of unserviceable materials with all lead

and lift (ii) in cement mortar.

163 Dismentling barbed wire in fencing including making rolls and also including 480.00 Rmt. 68.48

dismentling fencing posts including all earth work concrete in base and

making good the disturbed ground stacking useful materials as directed

and disposing as directed and disposing of the unserviceable materials with

all lead and lift.

164 Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. angle 1380.00 Rmt. 391.93

posts 40mm x 40 mm x 6 mm and oil painting 3 coats fixed at 2.5 mt, C/c.

with five horizontal lines and two diagonals of galvanised steel barbed wire

weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G.I.

staples including fixing the posts in ground with 0.5 M x 0.5.M x 0.5 M.

block in C.C. 1:5:10 etc. complete.

165 Providing junction for rainwater Junction chamber of clear size 0.60 x 0.60 x 40.00 No. 3880.42

0.75 m with excavation of size 1.04 x 1.04 m and 0.15 mt thick C.C 1:2:4

bed concrete including half brick masonry wall in C.M. 1:4 of 0.75 m height

with 15mm thick cement plaster with floating coat of neat cement slurry

inside and 0.10 mt thick 0.84 x 0.84 size R.C.C. (1:2:4) slab with TMT steel

and 0.60 m x 0.45 m cast iron manhole cover with frame with weight not

less than 35 kg as per detailed drawing as directed.

166 Providing filter chamber of brick work in C.M. 1:5 of clear size 2.06 m x 1.21 2.00 No. 14445.02

m x 1.20 m and excavation dimension of 2.36 x 1.51 x 1.35 m including

C.C 1:2:4 bed concrete of 0.15 m thick including brick work in c.m 1:5 for

23 cm thick wall including 15mm thick cement plaster inside with floating

coat of neat cement slurry and 10 cm thick RCC 1:2:4 top cover with TMT

steel and manhole cover with frame of minimum weight of 35 kg and filing

filter material Kapchi and sand as per detailed drawing.

It. Item of Work Qty. Unit Rate in Amount

167 Providing Rainwater harvesting 2m x 2m x 4m pit for water logging with 2.00 No. 93485.60

excavation in any strata upto 4m depth filling the pit with brick bat in 0.6 in

depth 0.30m depth with 10mm to 20mm Kapchi 0.40m depth with 6 x

10mm grade and 2.00mt depth with coarse sand in layers including making

100 mm dia. PVC line for water inlet etc. as directed 250mm dia. bore up to

20mt depth and 150 mm dia. plain of perforated PVC pipe casing 20mt

depth and making connection etc. complete as directed for recharge well

for rain water harvesting.

168 Constructing brick masonry chamber for under ground C.I. Inspection 20.00 No. 3660.76

chamber and bends with bricks having crushing strength not less than

Kg/cm2 in C.M. 1:5 C.I. cover with frame (light duty) 455 mm. x 610 mm.

Internal dimensions, total weight of cover with frame to be not less than

Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab with

1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm.

size) foundation concrete 1:5:10 inside plaster 15 mm. thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls & a

bed concrete etc. complete. (ii) Inside dimensions 500 mm. x 700 mm. and

450 mm. deep for pipe line with one or two inlets.

169 Constructing brick masonary chamber for under ground C.I. inspection 20.00 No. 7180.44

chamber and bends with bricks having crushing strength not less than

Kg/cm2 in C.M. 1:5 C.I. Cover with frame (light duty) 455 mm. x 610 mm.

Internal dimensions, total weight of cover with frame to be not less than

Kgs. weight of cover 23 Kg. and wt. of frame 15 Kg) R.C.C. top slab with

1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm.

size) foundation concrete 1:5:10 inside plaster 15 mm. thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls &

abed concrete etc. complete (I) inside dimensions 600 mm x 850 mm and

450 mm. deep for pipe line with three or more inlets.

170 Extra over items for every additional depth of 0.1 m or part there of beyond 20.00 No. 264.86

450 mm depth for brick masonry chamber (i) for 500 mm x 700 mm

171 Extra over items for every additional depth of 0.1 m or part there of beyond 20.00 No. 325.59

450 mm depth for brick masonry chamber (i) for 600 mm x 855 mm

172 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse 4.00 No. 19349.63

sand : 4-graded stone aggregate 20mm nominal size) foundation concrete

1:3:6 mix (1-cement : 3- coarse sand : 6 brick bats 40 + 50mm size) inside

plastering 15mm thick with Cement Mortar 1:5 (1 cement : 5 coarse sand)

finished with a floating coat of neat cement and making channels in cement

concrete 1:2:4 mix (1-Cement : 2-Coarse sand : 4 stone aggregate 20mm

nominal size) finished smooth complete including curing and fasting (i)

Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with

frame size 560mm diameter total weight of cover and frame to be not less

than 128 kgs. (Wt. of cover 64 Kg. and wt. of frame 64 Kg.) (A) With

230mm thick walls of brick msonry using brick having crushing strength not

less than 35Kg. / Sq.cm. in cement mortar 1:5 (1 cement : 5 coarse sand)

(2) B type depth 1.50 Metre for 150mm diameter sewer.

173 Construction of Septic tank as per given drawing including inside clear 2.00 No. 123956.29

dimension 5.00 x 2.50 x 2.00 mtr. including excavation, C.C. 1:4:8, brick

work in C:M 1:6, half brick work in C:M 1:4, plaster in C:M. 1:3 and finishing

with floating coat of neat cement slurry, I.P.S of 50 mm thick, RCC slab

cm thick, TMT Fe-500 bar reinforcement, three UPVC SWR pipe 75 mm

dia. with cowl vent including trench filling by sand, three C.I. Manhole cover,

spreading excavated earth, C.I. step including all cost of materials and

It. Item of Work Qty. Unit Rate in Amount

174 Construction of Sock pit having internal diameter 3.00 mtr. and depth 5.00 2.00 No. 111033.34

mtr with surrounding 4.00 mtr. height honeycomb masonary and 1.00 mtr.

height brick masonary in C:M 1:6 including providing R.C.C slab 15cm thick

with R.C.C beam including the cost of C.C. (1:1.5:3) & TMT Fe-500 bar

reinforcement and spreading excavated earth as per drawing given etc.

175 (A) Supplying, installation, testing and commissioning of Electric Driven 4.00 Set 87184.40

Terrace Fire Pump suitable for automatic operation and consisting of

following, complete in all respects, as required: (Terrace Booster Pump)

(B) Horizontal type, single Stage, centrifugal, End suction pump of cast iron

& bronze impeller with stainless steel shaft, Gland Pack conforming to IS

(C) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed

2900 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply

with IP 55 protection for enclosure, horizontal foot mounted type with Class-

'F' insulation, conforming to JS-325.

(D) M.S. fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required.

(E) Suitable cement concrete foundation duly plastered with anti vibration

900 LPM at 35 m Head

176 Fabrication, Supply, Installation, testing & commissioning of Electrical 4.00 No. 35350.00

Control Panel of cubical construction, floor/Wall mounted type, fabricated

out of 2mm thick CRCA sheet, with hinged lockable doors, dust and vermin

proof, powder coated of approved shade after 7 tank treatment process,

inter connection with suitable size copper conductor cable/solid copper

strip, having switchgears and accessories, mountings and internal wiring,

earth terminals, numbering etc. complete in all respect, suitable forTerrace

Booster pressurisation pump complete as per NBC-16 specification with

following in coming and Outgoings, suitable for operation on 415V,

phase, 50Hz AC supply with enclosure protection class IP 42 as required:

System Controller

Supply Installation Testing and Commissioning of system Controller to

Control operation of Terrace Booster Pump in sequence as per

Specification consisting of relays, timers, sensors, annuaciation window for

fault indication, Termination of Pressure Switch, on/off Push buttons,

complete as per local fire norms and as directed by EIC.

177 Providing, laying, testing & commissioning of B Class medium duty G.I.

Pipe conforming to IS 1239 including welding, fittings like elbows, tees,

flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe in the

wall/ceiling with suitable clamp / support frame and painting with two or

more coats of synthetic enamel paint of required shade complete as

A 25 mm dia. 10.00 Mtr. 520.41

178 Supplying, fixing, testing and commissioning of butterfly valve of PN

rating with bronze / gun metal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS:13095 of following sizes as

179 Providing, installation, testing and commissioning of non-return valve of 8.00 No. 9458.04

following sizes confirming to IS: 5312 complete with rubber gasket, GI

bolts, nuts, washers etc. as required : 100mm dia.

180 Providing, installation, testing and commissioning of stainless steel Y- 4.00 No. 5703.92

Strainer fabricated out of 1.6mm thick stainless steel, Grade 304, sheet

with 3mm dia holes with stainless steel flanges. 100mm dia.

It. Item of Work Qty. Unit Rate in Amount

181 S. I. T. C. in position approved make Forged Brass Ball valves having

Body, Ball & stem bonnet in forged brass. Lever, washer & Nut in Carbon

steel. Gland packing & body seat ring in PTFE (Teflon) seal with female

BSP threads. Tested to a pressure not less than 20Kg/Sq.cm with

necessary G. I. unions, nipples, threaded joints complete with all

accessories etc. complete as per direction of the Engineer-in-charge.

182 Providing and fixing 25 mm dia. Air valve for main discharge header. For 6.00 No. 980.44

Air Release including supply, installing, testing and commissioning etc.

complete as directed by Engineer in charge.

183 Supplying installing testing & commissioning of 100 mm dia. Glyserine filled 12.00 No. 2964.31

Pressure gauge 1% Accuracy direct bottom 3/8" BSP connection in brass

socket & Range 0 to 16 Kg/Cm2 etc. including required accessories i.e

needle valve, siphon tube etc necessary as directed by Engineer in Charge.

184 Providing & fixing of pressure switch in G.I. pipe line including connection 4.00 No. 2454.73

etc. as required. SITC of Pressure switches for auto operation of pumps

having 1/4" BSP T fittings with all accessories like Siphone Pipe & MS

185 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 16.00 Rmt. 29.96

kv grade ISI marked copper wires of following size to be erected as

directed. (d) 1.50 Sq.mm 2 core round PVC sheathed (For Pressure

186 Supplying and fixing of following sizes of Medium class PVC conduit along 150.00 Rmt. 124.11

with accessories in surface/recess including painting in case of surface

conduit, or cutting the wall and making good the same in case of recessed

conduit as required. (for Flexible cable laying). 25mm

187 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe at road crossing or floor of following size of cable.

3C x 6 sq.mm (for Booster pump to Panel) 40.00 Rmt. 392.87

4C x 6 sq.mm (for Main Electrical Panel to Booster Panel) 86.00 Rmt. 506.09

188 Supplying and making end termination with brass compression gland and

copper lugs for following size of PVC insulated and PVC sheathed / XLPE

aluminium conductor cable of 1.1 kV grade as required.

3C x 6 sq.mm (for Booster pump to Panel) 4.00 No. 205.42

4C x 6 sq.mm (for Main Electrical Panel to Booster Panel) 8.00 No. 219.12

189 Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including 2.00 No. 11844.39

accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/

coke and salt as required.

190 Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for 90.00 Rmt. 994.59

connections etc. as required.

191 Supplying and installing following size of perforated Hot Dipped Galvanised 80.00 Rmt. 723.16

Iron cable tray (galvanisation thickness not less than 50 microns) with

perforation not more than 17.5%, in convenient sections, joined with

connectors, suspended from the ceiling with G.I. suspenders including G.I.

bolts & nuts, etc. as required. 150 mm width x 50 mm depth x 1.6 mm

192 Structural steel work riveted, bolted or welded in built up sections, trusses 1537.94 Kg. 93.65

and framed work including cutting, hoisting fixing in position and applying a

priming coat of approved steel primer all complete.

It. Item of Work Qty. Unit Rate in Amount

193 Supplying and fixing single headed internal / external hydrant valve with 14.00 No. 6544.46

instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel

ISI marked conforming to IS 5290 (TYPE A) with blank PVC/ABS cap and

GI chain as required with : Single headed SS

194 Supply Installing Testing & Commissioning of M.S. 18 guage hose box to 14.00 No. 4455.86

accommodate of 2 Nos 15-Mtrs. Length Hose Box pipe & 1 No. of branch

pipe with Nozzle, With necessary fabrication support and joints and 3 mm

glass shutter including powder coating etc. complete as directed by

engineer in charge.

195 Supplying and fixing 63 mm dia., 15 m long RRL hose pipe SS with 63 mm 28.00 No. 3807.19

dia male and female couplings duly bound with GI wire, rivets etc.

conforming to IS 636 (type-A) as required. - SS

196 Supplying & fixing 63 mm dia. SS short branch pipe with 20 mm nominal 14.00 No. 1422.56

internal diameter size nozzle conforming to IS 903 suitable for

instantaneous connection to interconnect hose pipe coupling a required.-

197 Supplying and fixing of fire brigade connection of cast iron body with SS 4.00 No. 5770.69

male instantaneous inlet couplings complete with cap and chain as reqd.

for suitable dia GI pipe connection conforming to IS 904 as required: 2 way-

100 mm dia Pipe

198 Supplying & fixing 6 Kg. capacity ABC Dry Chemical powder Stored 38.00 No. 3220.46

Pressure type fire Extinguisher as per I.S-15683 having ISI marked etc.

complete as directed by EIC

199 Supply & installation ISI marked (IS:15683) Fire Extinguisher, Carbon- 38.00 No. 6118.86

dioxide type capacity 4.5 Kgs. flat base including valve, discharge hose of

not less than 10mm dia., 1M long and complete in all respects including

initial fill with CO2 gas conforming to IS:307-1966 filled to a filling rate of

not more than 0.667 and wall suspension bracket. (LMR) etc completed as

200 Supplying and fixing first-aid Hose Reel with MS construction spray painted 10.00 No. 10333.67

in post office red, conforming to IS 884 complete with the following as

25 mm nominal internal dia. water hose thermoplastic (Textile reinforced)

type -2 as per IS: 12585 25 mm nominal internal dia. gun metal globe valve

& nozzle. Drum and brackets for fixing the equipments on wall - 36 m

201 Design, Supply & Installation of Safety Signage approved make made of 100702.00 Sq.cm 2.68

zinc sulphide based glow in the dark rigid sheet with high luminous property .

enclosed in a transparent weather proof U/V stabilized plastic pasted on

3mm thick clear acrylic sheet such as EXIT, EMERGENCY EXIT, DO NOT

USE LIFT IN CASE OF FIRE, FLOOR MARKINGS, FIRE LIFT,

STAIRCASE EXIT, FIRE ALARM CALL POINT, FIRE EXTINGUISHER etc.

completed as directed by engineer in charge.

202 Supplying, installation, testing and commissioning of Fire Alarm Panel for 2.00 Each 7588.69

following Zones, complete with visual indications for short circuite fault,

open circuite fault, fire condition and all other standard facilities as per IS

2189 with mimic diagram for all area/ zone covered, complete with all

connections, interconnection as required for 4 zone panel.

203 Supplying, installation, testing & commissioning of Conventional type 10.00 Each 349.22

manual call point complete as directed.

204 Supplying, installation, testing & commissioning of Conventional hooter 10.00 Each 1161.50

cum strobe / Flasher complete as directed.

205 Supplying, installation, testing & commissioning of Conventional smoke 50.00 Each 986.89

detector with built in LED and mounting base complete with all connections

etc. as required.

It. Item of Work Qty. Unit Rate in Amount

206 Providing, fixing & installation PVC 100 x 100mm junction box for smoke 20.00 Each 140.79

detector including fixing in ceiling with all labour & materials as directed by

engineer in charge.

207 Supplying & laying of 2 x 1.5 sq.mm fire alarm armoured cable, 600 / 1000 600.00 Rmt. 148.08

V rated with annealed copper conductor having XLPE insulation, steel wire

armouring & FRLS outer sheath complete as required.

208 Providing and fixing Remote Push Button Switch for Main Fire Pump on All 6.00 No. 2509.45

floors for operation of Fire Pump including control wiring 3 core x

Sq.mm copper armoured with all required fittings and accessories with all

labour and materials as directed by Engineer in charge.

209 Providing and laying 38 x 25 mm PVC minitrunking for 2c x 1.5 Sq.mm 600.00 Rmt. 135.22

armoured cable into the trunking in line and level as directed.

210 Cutting hole by mechanical means of 25 to 150 mm dia. (or more as per 22.00 No. 505.00

site situation) in slab / beam throughout the thickness including finishing

the same with cement mortar 1:3 as directed by Engineer in charge.

211 Providing, lifting (above Terrace Floor) & fixing four layer water tank of 20000.00 Litre 8.59

required capacity with all necessary fitting and connection , Tank Nipple

etc. Complete on terrace cabin or at any level as directed by engineer in

charge. Rates are inclusive of all applicable taxes

212 Providing & making cage made from 1mm thick MS Plate with fabrication 8.00 No. 15150.00

tools, including opening shutter with required hinges & handles as per

requirement and should be water tight to prevent pump & panel from

whether effect. Cage should be design and fixed in such a manner that

pumps and panel can be removed for maintenance purpose at any time as

approved and directed by engineer incharge with all laboured and materials

etc. complete with two coats of oil painting inside and outside surface to

213 Labour charges for Professional & Administrative Charges of Fire NOC & 2.00 Job 101000.00

Liasoning for Fire Fighting System include engaging skilled labour & skilled

supervisor for testing of all fire system on site with operating pump/panel &

FA system in consultation with nominated fire consultant. The testing

should be done in the presence of PWD authority with required pressure of

3.5 Kg pressure at farthest & Highest point. Also testing should be done at

every floor with all installed equipment before final testing. All the required

documents pertaining to final NOC will be prepared by contractor except

fire drawing will be given by the client/authority. The rate is not including for

the installed equipment which required change at the time of testing and

will be paid separately. Also the required levies for final testing will be born

by PWD / authority.

214 Supplying of yellow or Goradu soil will all lead and lift including spreading 496.00 Cum 323.20

watering dressing etc. complete.

215 Spreading of DAP fertilizer mixing with soil properly levelling & dressing etc 124.00 Cum 81.81

216 Supplying of well rotted FYM (Farm Yard manure) with all lead and lift 124.00 Cum 424.20

including spreading mixing dressing etc. complete.

217 Plantation of trees in soil including digging 45 x 45 x 45cm size pits, 100.00 No. 40.40

preparing soil providing and mixing fertilizer, watering, planting and filling

the pits as per direction including etc. complete

218 Providing Tree Plants having minimum 1.00mt. Height and healthy growth 100.00 No. 151.50

of various kinds as like Peltoform, Palm,Gulmahore, Karanj, Amla, Rain

tree, Saptparni, Cherry, Cryjeliya, Spethodiya, Paras Pipala, Garmalo,

Neem, Borsalli, Kadam, Buch, Chanpo, Asopalav etc. as per instruction by

engineer in charge.

It. Item of Work Qty. Unit Rate in Amount

219 Maintenance of Planted tree upto 60 Days including watering, digging pits / 200.00 No. 202.00

rimming applying fertilizer, instectiside, pestiside and replacing plants if

necessary etc. complete for raising of Plants weeding or soil working also

including maintaining Water supply lines and drip lines of Plantation (Water

and Electricity supply by Dept.)

220 Providing and fixing 1.8mt. Height and 45cm dia round Tree guard by using 200.00 No. 227.25

32mm x 32mm x 3mm size vertical MS angle and 50 x 50 mm x 10 gauge

welded steel mesh framing on 32 x 3 mm MS flats and MS sheet name

plate 200 x 50mm as per design including one coat of primer and two coats

of oil painting etc. complete.

221 Planting and developing flowering plants grown in nursery having 100.00 No. 202.00

approximate height 4 to 5 ft or Height as per Landscape Plan with natural

growth and natural colour planted in a lump of soil packed in polithyline bag

or Earthern pot. including organic & chemical fertilizer Pesticides,

fungicides, hormones & maintaining the plants up to three months as

Jasud, deserted. Eforbia, Croton-1, Eforbia,Croton-2 - Flower bed & others

as directed by EIC

222 Providing and fixing Drip Irrigation system of approved brand for Plantation

including fixing with water supply line and plantations per drawing and

Screen Filter 4.00 No. 505.00

Pressure Gauge 1" dia. (0-2 Kg. / Sqcm) 4.00 No. 313.10

Bypass Assembaly Gun Metal 4.00 No. 4343.00

32 dia Control Valve 4.00 No. 323.20

16mm internal HDPE pipe 2.5Kg. Including fitting 200.00 Rmt. 21.11

223 Providing and fixing gun metal check or non return fullway controll wheel 10.00 No. 1111.00

valve 50mm dia.

224 Providing and laying in trenches 10.0kg.f/ Sqcm working pressure PVC 400.00 Rmt. 82.17

pipes of the following outside dia. having white colour complete with

necessary fittings clamps etc. (A) 20mm

225 Providing and laying in trenches 10.0 kg.f/ Sqcm working pressure PVC 400.00 Rmt. 105.50

pipes of the following outside dia having white colour complete with

necessary fittings clamps etc. (B) 25mm

226 Bowing and developing flowering plants grown in nursery having 100.00 No. 25.25

approximate height 0.5 to 1 ft or Height as per Landscape Plan with

natural growth and natural colour planted in a lump of soil packed in

polithyline bag or Earthern pot. including organic & chemical fertilizer

Pesticides, fungicides, hormones & maintaining the plants up to three

months as deserted. Duranta

227 Bowing and developing flowering plants grown in nursery having 200.00 No. 30.30

approximate height 0.5 to 1. ft or Height as per Landscape Plan with

natural growth and natural colour planted in a lump of soil packed in

polithyline bag or Earthern pot including organic & chemical fertilizer

Pesticides, fungicides, hormones & maintaining the plants up to three

months as deserted. Green mahendi border

228 Removal of existing grass from top soil upto a depth of 23 cm breaking and 2480.00 Sq.m. 20.20

drying of lumps, removal of all dried roots, cleaning the soil and rought

leveling and preparing the lawn bed , preparing and laying of peat moss

mulch, mixing : watering laying adequate quantity of loam oil bed : grading

and compaction by watering.

229 Planting of lawn of approved quality at 15 cms diagonally, maintenance of 2480.00 Sq.m. 101.00

the laen till virtual completion of soft landscape work : removal of all

thatching through out the area: along with appropriate use of termite and of

weedixite as red when required and grassing lawn.

230 Rainbird -5004/ Hunter - PGP made Non-Potable Water Marked Gear 20.00 No. 1515.00

driven Pop-up Sprinkler 5" with flow shut off device (5" Pop Up height from

Bottom to Centre of Discharging Nozzle) from (9 to 13 Mtr Radius) Check

Valve, Slip Clutch Mechanism complete with required nozzle.

231 Rainbird or Hunter made Swing Joint 3/4" with PP Clamp Saddle Chromed 20.00 No. 404.00

Nut Bolt & Nitrile Rubber Gasket Make: RainBird/Toro/Astore

It. Item of Work Qty. Unit Rate in Amount

232 3 Arm 360 degree rotational sprinkler for watering garden lawn yard fitting 20.00 No. 989.80

with required nozzle, clamps etc. complete.

233 Metal Rocker 360 degree rotational sprinkler for watering garden lawn yard 20.00 No. 1515.00

fitting with required nozzle, clamps etc. complete.

234 Demolition including stacking of serviceable materilas and disposal of 834.00 Cum 1084.30

unserviceable materials with all lead and lift. (i) R.C.C. Work

235 Dismentaling tiled of stone floors laid in mortar including stacking of 3442.00 Sq.m. 48.91

serviceable materilas and disposal of unserviceable materials with all lead

236 Dismentalings cement asbestos hard board in ceiling or partition walls, 1018.00 Sq.m. 60.60

wooden trellis work including trellis work including frames, stacking of

serviceable materials and disposal of unserviceable materials with all lead

237 Dismentling steel work including distempering and stacking the materials 1910.00 Kg. 3.76

with all lead and lift.

238 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 151.00 Each 192.41

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

239 Dismentling C.I. pipes G.S.W. pipes and A.C. rain water pipes with fittings 174.00 Rmt. 76.64

and clamps including stacking the materials with all lead and lift (for any

240 Dismentling santtary fittings like wash basin, W.C. pan Indian and 28.00 Each 415.79

European type, flushing tank etc. including stacking the materials with all

Electrical Items

241 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 1147.00 Pt. 449.45

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected with

6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected, with necessary Lamp holder /

ceiling rose / H.D.Connector as directed with medium class Rigid PVC pipe

and accessories erected concealed in wall/ceiling complete.Cat-III

242 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth 10.00 Pt. 560.55

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose or H.D.

Connector as directed.with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete.Cat-III

243 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 570.00 Pt. 629.23

both are of ISI marked 1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected on

PVC / Metallic / Wooden box, single mounting base frame covered with

textured / metallic / white front plate modules erected on / in wall / ceiling as

per pipe erected with necessary ceiling rose / H.D. Connector as directed

with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete.Cat-III

It. Item of Work Qty. Unit Rate in Amount

244 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic / Wooden box

covered with appropriate front plate modules erected on / in wall / ceiling as

per pipe erected with following type of accessories.

(a) For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby 213.00 Pt. 473.69

switch board / mcb db board with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete. Cat-III

(b) For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb 204.00 Pt. 697.91

db board with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete.Cat-III

245 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 213.00 Pt. 241.39

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic / white front plate modules erected on / in

wall / ceiling with following type accessories. Cat-III

246 Providing following type of Modular Type Accessories mounted with PVC /

metallic / Wooden box, single mounting base frame covered with textured /

metallic / white front plate, modules erected with necessary connections as

per site situation directed by Engineer In charge..

(a) Computer RJ-45 socket Cat-III 181.00 No. 153.52

(b) 6/16Amp. Universal socket Cat-III 38.00 No. 190.89

(c) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch Cat-III 38.00 No 390.87

247 Providing and erecting ISI mark Medium class RIGID PVC PIPES of 3277.20 Mtr 32.32

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution &

clamps with following 25 mm dia. of pipes, in approved manner as directed.

248 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 8424.00 Mtr. 78.78

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in / flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size with medium class Rigid PVC pipe and

accessories. 2 wire 2.5 sq. mm

249 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq.mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

with medium class Rigid PVC pipe and accessories.

(a) 2 wire 4 sq. mm 2018.00 Mtr. 107.06

(b) 2 wire 6 sq. mm 809.00 Mtr. 140.39

(c) 4 wire 4 sq. mm 362.00 Mtr. 172.71

(d) 4 wire 6 sq. mm 2122.00 Mtr. 248.46

250 Supplying & erecting approved make LAN cable of following size in existing 5462.00 Mtr 45.45

pipe as per direction.[C] CAT-

251 SITC of 8 x 10/100/1000BASE-T PoE ports 1.00 Nos. 18400.18

2 x Gigabit SFP ports

Advanced L2 switching and security features

L2+ Static Routing

Optional “standard mode” or “surveillance mode” management user

65W PoE budget [Approved by Competent Authority i.e. not Below the rank

of Executive Engineer]

252 SITC of 24 x 10/100/1000BASE-T PoE ports 9.00 Nos. 31996.80

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features L2 + Static Routing Optional

“standard mode” or “surveillance mode” management user inter face 193 W

PoE budget [Approved by Competent Authority i.e. not Below the rank of

Executive Engineer]

It. Item of Work Qty. Unit Rate in Amount

253 Providing & erecting Switch board for Computer or electric apparatus 238.00 No. 1081.71

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered with

textured / metallic / white front plate,modules erected with necessary

connections as directed 1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch 3 nos. 6A 5 pin Plug.For Modular Type Accessories. Cat-

254 Supplying and erecting horizontal / vertical mounting type storage water 29.00 No. 7977.99

heater with copper container housed in M.S./S.S./ABS body insulated with

glass wool/puff complete with heating elements,adjustable thermostats

300C to 850C, indicating lamp, safety valve, fusible plug, etc. complete

erected with coach bolts, nuts. washers & cementation (B)15 Ltr-.with

/3K.W. heating element Premium Category

255 Decorative call bell Ting-tong box type 250 volts complete erected 35.00 Nos. 68.68

256 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 537.00 Nos. 535.30

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium

die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95,

THD < 15%, CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt,

LED LED driver efficiency > 85% (fitting required LM-79 & LM-80

Certificates) (NOTE: Below description have shown ranges of Wattage

capacity of LED fittings. The Engineer incharge may select any wattage

capacity between the ranges shown) Tube Light with integral driver, 36-40

Watts, Surge-2 KV, IP-20, conventional 4 feet Cat-III

257 Supplying and erecting led lamps with following wattage capacity of 220 to 154.00 No. 112.11

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection, Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 LED Lamps integral type, with PC diffuser suitable

LAMP holder, 5 to 8 watts Cat-III

258 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 67.00 No. 758.51

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA / aluminium

pressure die cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15%, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt, LED driver efficiency > 85%

(fitting required LM-79 & LM-80 Certificates) (NOTE: Below description

have shown ranges of Wattage capacity of LED fittings. The Engineer

incharge may select any wattage capacity between the ranges shown)

Square/ Circular shaped Surface / Recessed Mount Downlight with

provision for spring loaded mounting clips complete. IP20, 22-24 watts,

Surge-2 KV Cat-III

259 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 298.00 No. 1794.77

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt, LED driver efficiency > 85 % (fitting

required LM-79 & LM-80 Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings. The Engineer incharge

may select any wattage capacity between the ranges shown) LED Panel

Light with provision for Plane front frame with translucent cover fixed to

housing complete.IP20 , 36 watts, 24" x 24", Surge- 2KV Cat-III

It. Item of Work Qty. Unit Rate in Amount

260 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan 570.00 Nos. 1948.29

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

1200 mm sweep complete having 3blades with aluminium blades with

canopy & 30 cm. down rod erected with earthing.(Make shall be approved

by Engineer in charge)

261 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 804.00 Mtr. 108.07

down rod erected duly painted for fan complete with proper insulation

without leakage and earthing.

262 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to 570.00 Nos. 108.07

the RCC bars up to 50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

263 Supplying & erecting single phase approved make industrial exhaust fan 59.00 Nos. 2054.34

suitable for medium duty ring mounted low noise operation suitable for

medium duty having following dia size and maximum speed in RPM ,

mm dia 900 RPM Cat.II

264 Providing suitable M.S. louver shutter of the Exhaust fan. 59.00 Nos. 368.65

265 Providing recess in wall or window frame suitable for erection of Exhaust 59.00 Nos. 189.88

fan complete with plastering and colour washing to match the colour of the

wall or window complete with expanded metal in order to render the fitting

in accessible and the room water-proof.

266 Providing and erecting approved make split air-conditioning unit consisting 38.00 No 38820.36

of copper condensing unit with fan motor, hermetically sealed rotary

compressor with accessories etc. duly connected separately erected

evaporating unit and blower motor with its accessories by means of extra

supplied proper insulated copper tubing,drain PVC pipes suitable for (cost

includes powder coated Stand, Eco Friendly green gas charging, 15A plug

top & Remote Control) with necessary core cutting. For 3 Star Rating of

current year, for 2 ton capacity.

267 Supplying and erecting insulated pair of soft copper tubing open or 380.00 Rmt 822.14

concealed including power and control cable, necessary PVC drain pipes

for Split AC machine up to 4 TR capacity

268 Providing & erecting water cooler having storage capacity 150 Ltr. & 9.00 Nos. 46648.87

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet

temp. of the water should drop by 15˚C within a hour, The water cooler

should be comprising of hermetically sealed compressor, fan motor,

condensing unit, water tank surrounded by evaporating, coil, thermostats,

relay etc.complete with necessary inlet & outlet connection. The body of

water cooler will be made from Stainless Steel..

269 Supplying & erecting 5 stage single reverse osmosis water purification 9.00 Nos. 24394.53

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump capacity

80 psi, mention with 40 psi inline type post carbon filter auto low & high

pressure switches with following size of storage tank & LPH capacity &

erected as directed.50 Ltr / Hr with 150 psi 2 nos booster pump.

270 Supplying and erecting approved make Single phase power conditioners 38.00 Nos. 2697.71

suitable for input voltage 180V / 280V, output voltage 220V (+ / - 10%) AC

50 ‘Hz with electronic relays & component of housed in sheet metal cabinet

with epoxy powder coated, with high - low cut-off, time delay, voltmeter,

selector switch, 5/15 A universal socket with range off 4 KVA

271 (a) Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 54.00 Nos. 527.22

Amp. Plug socket, company fabricated powder coated sheet steel

enclosure erected as directed with connection.[A] Metal Clad Socket with

metal clad top Cat.III

It. Item of Work Qty. Unit Rate in Amount

(b) Providing & erecting insulated socket 3P+N+E with Plug16A rating 18.00 Nos. 1632.16

which is comprised of Four pole MCB slot and insulated socket IP40 Cat-III

(c) Providing & erecting insulated socket 3P+N+E with Plug 32A rating 60.00 Nos. 2094.74

which is comprised of Four pole MCB slot and insulated socket IP40 Cat-III

272 Providing and erecting Sheet Steel powder coated Vertical MCB distribution

board (VTPN) - flush / surface mounted double door (IP54) fitted with

copper insulated busbar, isolated neutral bar, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3, suitable for 250 AMP TPN

MCCB + RCCB as incomer and three phase outgoing as per following.

(The DBs should be used of same company of MCB to be used)

(A) 4 way outgoing 7.00 Nos. 9240.49

(C) 8 way outgoing 14.00 Nos. 11826.09

273 Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for

(B) single phase incoming and horizontal single phase outgoing.sheet steel 13.00 Nos. 1152.41

double door (IP-43) 8 way

(C) single phase incoming and horizontal single phase outgoing.sheet steel 22.00 Nos. 1492.78

double door (IP-43) 12 way

(D) three phase incoming and single phase horizontal type outgoing Per 13.00 Nos. 2339.16

phase isolation type (PPI) sheet steel double door.4 way.

(E) three phase incoming and single phase horizontal type outgoing Per 7.00 Nos. 2913.85

phase isolation type (PPI) sheet steel double door(ii)6 way

(F) three phase incoming and single phase horizontal type outgoing Per 10.00 Nos. 3412.79

phase isolation type (PPI) sheet steel double door.8 way.

(G) three phase incoming and single phase horizontal type outgoing Per 9.00 Nos. 3874.36

phase isolation type (PPI) sheet steel double door.12 way

274 Providing and erecting Approved make Three pole moulded case circuit 19.00 Nos. 5355.02

breaker having breaking capacity ICU of 25 K.A. at 415 V having normal

current rating up to 25 A to 100A. with fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

275 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B

curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity

276 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B 130.00 Nos. 587.82

curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity.6 to 32 Amp. Cat-III

277 Providing & erecting 240 V MCB double pole switch for lighting Load (B 44.00 Nos. 278.76

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

box having following capacity 6 to 32 Amp. .Cat-III

278 Providing and erecting Miniature circuit breaker single pole 6A to 25A 914.00 Nos. 112.11

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box confirming to IS 8828/1996 with ISI Mark

It. Item of Work Qty. Unit Rate in Amount

279 Providing and erecting Approved make RCCBs conforming to IS:

and having sensitivity of 30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as

(i) 25 Amp DP, Cat-III 117.00 Nos. 1969.50

(ii) 40 Amp DP, Cat-III 35.00 Nos. 2235.13

280 Providing & erecting weather proof, dust & vermin proof, floor mounted 23.40 Sq.Mtr 10468.65

front operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories, supporting

angles/ flats channel including cutting, bending, drilling, welding, riveting

with internal partitions & cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch gears, BUSBARS,

suitable size of inter connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses / MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking arrangement and

rubber gasket, heavy duty end terminal connection, danger notice board,

necessary ventilation, earthing strip complete.

The Panel shall be painted with epoxy powder coating. (The rates excludes

the cost of switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied with following approved

manufacturers with following size.(A) locally fabricated panel board (i) with

281 Providing and erecting Approved make Four pole moulded case circuit 58.00 Nos. 6173.12

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

282 Providing and erecting Approved make Four pole moulded case circuit 13.00 Nos. 8055.76

breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal

current rating 125A.with variable Thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.housing ICS=100% of ICU

283 Providing and erecting Approved make Four pole moulded case circuit 5.00 Nos. 16221.61

breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.housing ICS=100% of ICU

284 Providing and erecting Approved make Four pole moulded case circuit 1.00 Nos. 25228.79

breaker having breaking capacity ICU of 50 KA and above at 415 V having

Normal current rating 400A. with variable thermal & magnetic release

suitable to work on A.C.supply 50 c/s. With all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only. Cat III

285 Providing and erecting Approved make Four pole moulded case circuit 8.00 Nos. 20946.39

breaker having breaking capacity ICU of 35 KA. and above at 415 V having

normal current rating 250A. with variable thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only. Cat III

It. Item of Work Qty. Unit Rate in Amount

286 Providing and erecting Approved make Four pole moulded case circuit 2.00 Nos. 27751.67

breaker having breaking capacity ICU of 50 KA and above at 415 V having

Normal current rating 400A. with variable Thermal & magnetic release

suitable to work on A.C.supply 50 c/s. With all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat IIINote:-1 Add Rs. 10% extra for housing /

Encloser of MCCB for Item No 3-4-1 to 3-4-12 (The Enclosures should be

used of same company of MCCBs to be used)

287 Supplying and erecting triple pole & neutral 440V / 500V panel mounting

Copper Busbars with four equal Nos. of electrolyte bus having current

density not more than 1.6 Amp. / sq.mm (Rated current / cross section

area) duly wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary bus bar

supports /insulators, main cable socket to each bar, erected in existing

cubical panel with necessary connections.

(A) Suitable for 100 Amp. Capacity 5.20 Rn 1961.42

(A) Suitable for 200 Amp. capacity 5.50 Rn 3202.71

(B) Suitable for 400 Amp. capacity 1.20 Rn 7319.47

288 Supplying and erecting approved make panel mounting type Digital 20.00 Nos. 1275.63

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring etc. with manufacturers

calibration certificate.

289 Supplying and erecting approved make panel mounting type Digital 20.00 Nos. 1558.43

Ammeter having 3 digits LED display, external CT operated, calibrated for

to 1000 Amps suitable to operate on 500 Volt AC, erected on existing panel

board with all connection, wiring etc. with manufacturers calibration

290 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC 40.00 Nos. 317.14

Supply 500 V on existing panel board with necessary connections.

291 Supplying and erecting approved make suitable panel indicator LED type 60.00 Nos. 43.43

lamp, lens cover, complete erected with necessary connections. [9-2-9]

292 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 60.00 Nos. 274.72

1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with

insulating materials connected to the meter.

293 Providing and erecting Approved make Earth fault Relay suitable to mount

with inter connection suitable to following size of moulded case circuit

breaker having CT ratio & MCCB rating as following along with shunt trip

220V AC. with all internal connections & complete erected in existing

294 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required.

(a) One wire 1.00 sq. mm 260.00 Mtr 11.11

(h) One wire 25.00 sq. mm 126.00 Mtr 225.23

(j) One wire 50.00 sq. mm 66.40 Mtr 448.44

(n) One wire 150.00 sq. mm 2.40 Mtr 1392.79

295 Cable Terminal (‘Plain" Type) Set of Four for

It. Item of Work Qty. Unit Rate in Amount

296 Solder less crimping type Copper lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

297 Solder less crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool & connected

to switchgear terminals with brass / cadmium plated nut bolts in an

approved manner.

298 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

/ Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables

(B) 4 core 6 Sq. mm 1012.00 Mtr 124.23

(C) 4 core 10 Sq. mm 224.00 Mtr 138.37

299 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables

(A) 4 core 16 Sq. mm 416.00 Mtr 151.50

(B) 4 core 25 Sq. mm 192.00 Mtr 188.87

300 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) 700.00 Mtr 534.29

(G) 3 1/2 core 185Sq. mm ( 70 Sq. mm 1/2 core) 350.00 Mtr 899.91

301 Providing and fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(B) 2 to 4 core 6 Sq. mm 626.00 Nos. 38.38

(C) 2 to 4 core 10 Sq. mm 4.00 Nos. 38.38

(D) 2 to 4 core 16 Sq. mm 54.00 Nos. 47.47

(E) 2 to 4 core 25 Sq. mm 30.00 Nos. 51.51

302 Providing and fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of cables.

303 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 16.00 Nos. 368.65

cms. dia. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire.

304 For using salt and charcoal / coke as required for pipe type earthing. 16.00 Nos. 171.70

It. Item of Work Qty. Unit Rate in Amount

305 Supplying & erecting in earthpit of minimum bore dia. 225mm size 23.00 Nos. 5842.85

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.

pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising,

Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection

terminal dia of 14 mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover (A) (approved

make OEM has to submit test certificate including value of earth resistance

of installation duly stamped and signed by agency and officer Incharge has

to ensure the value of earthing resistane mentioned in test Certificate) &

having back filling compound of, Inner chemical (CCM Compound)-

Resistivity :- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop :-

< 1 volt at no load & dry form, Sulphar content :- <2% (C) Back fill

Compound :- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by Agency. [A] For

electrical installation up to 440 V Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs..

306 Providing one bag of 25 Kg. Additional Back Filling Compound (BFC) Nos.

suitable for safe earthing device.

307 Providing and erecting required size HOT deep Galvanised iron strip for 118.00 Kg 77.77

earthing of H.T., OCB/ ACB/ Transformer LT panel board, Motors etc. using

308 Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10%, CCT 3000 K to 5700K,

Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt. LED driver

efficiency > 85%. (fittings required LM-79 & LM-80 certificates) (NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.

The Engineer incharge may select any wattage capacity between the

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must 28.00 No 3345.12

have 440VAC line supply with over-voltage protection.(above 36 to 48 watts

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must 12.00 Nos. 8453.70

have 440VAC line supply with over-voltage protection.above 120 to

309 Supplying & erecting approved make SMC press moulded composite FRP 12.00 No. 515.10

loop-in, loop-out approx. 2mm thick box complete with Bakelite connector

strip 5way (3P+N+E), DIN rail for mounting mob & hinged doors as per

requirement having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable clamps & earth bolt

of (B) 250mm x 200mm x 100mm [deep] size of box.

310 Supplying and erecting approved make Octagonal pole made from HR 26.00 Nos. 6874.06

sheet steel. The pole should be made as per IS and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal plate of min 6mm

Hylam sheet, standard profile 35mm x 7.5mm Din-Rail for MCB Mounting,

stud type terminal and arrangement for cable termination to be erected

With Suitable foundation (Included) as per details given by manufacturer

considering site requirement. 5 Mtr. Long 70 mm top x 130 mm bottom dia,

3 mm thickness with 200mm x 200mm x 12mm base plate, 4-M16 Bolts

and 600mm long J-Bolt. Approx Pole weight 46 kg

It. Item of Work Qty. Unit Rate in Amount

311 Supplying and erecting Street light pole bracket comprising main B Class

GI pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable for 76.5mm / 80mm /

require size of pole top having nuts and bolts for fixing the brackets and

having spread of 0.5 mtr. Length with 110 deg.with vertical plane and

suitable welded stiffener reducer and nipple with check nut complete

painted with one coat.of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm bracket 0.5 Mtr 24.00 Nos. 491.87

[B] Three Arm Bracket 0.5 Mtr 6.00 Nos. 743.36

312 Providing and erecting Three Phase IoT GSM/GPRS Central Control & 2.00 Nos. 59916.23

Monitoring System (CCMS) Panel for Streetlights Smart Feeder Panel with

3 Phase GSM/GPRS CCMS Streetlight Controller with LCD Display (1

Nos.). Streetlight Controller with Individual each Phase Control (Energy

Saving feature) and Spare relay facility. Street light Controller having

years of reserved battery for RTC. With 50 programmable schedule, month-

wise offset settable facility, Astronomic sunrise/sunset time programming in-

built for year long schedule. Operating Voltage @ 440 V AC with Over

Voltage & Short Circuit protection. 2 hour Battery Back-up for Streetlight

Controller. Panel to have 1 Nos. of 3 Phase – Class 1 Energy Meter for

Energy & Fault monitoring on CCMS Web Dashboard. Panel consisting of

Nos. of 3 Pole Contactors (3 x 18 A), 7 Nos. of 1 Pole Miniature Circuit

Breakers (32 Amp.) for Bypass, Input / Output supply functionalities, 1 Nos.

of 4 Pole Earth leakage circuit breaker for safety protection. Standard lock

& key facility for Panel security. Door Switch for unauthorized access &

tamper detection.

313 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A 24.00 Each 270.68

system and having breaking capacity 10 KA to be erected in existing box

confirming to IS 8828/1996 with ISI Mark

314 Providing & erecting open well horizontal mono block pump set with cast 2.00 Nos. 18746.61

iron body, complete for three phase submersible motor having. For 5 HP

phase open well horizontal mono block pump set suitable for 1350 LPM to

310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe. Cat-

315 Supplying & erecting approved make motor control cubical panel (Direct - 2.00 Nos. 7722.46

on - line) made from 16 G. CRCA sheet duly epoxy powder painted inside

and outside with hinged doors and locking, arrangement consisting of

suitable size of ON- OFF isolator (AC - 3/23duty) main fuses, single

phasing preventer, indicating lamps for R- Y - B phases, overload relay,

Automatic water level controller, Ammeter, Voltmeter each with two way

selector switch incoming, wires duly socket crimped, main contactor &

overload relay, start - stop push buttons, to be erected on angle iron frame

grouted on wall as directed. The isolator, overload relay & contactors will be

of L & T, Siemens or BCH make only. (A) DOL up to 5.0 H.P.

316 Lowering of submersible motor pump set at the depth of following 2.00 Job 856.48

,complete with required. Nos. and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after checking of threads of

each pipe with coupling to take the load of the pump set and pipe assembly

filled up with water For Open well Horizontal submersible pump set for

sump well (i) 1 HP to 5 HP

317 S.I.T.C. submersible pump set suitable for bore of 150 mm dia or more 2.00 Nos. 39659.67

having 3 phase motor capacity not less than 10 HP with following capacity.

Lifting and Lowering taken extra. [A] 10 stage 575 to 480 LPM discharge at

60 to 70 mtr head for 65 mm dia. delivery pipe. Cat.III

It. Item of Work Qty. Unit Rate in Amount

318 Providing and fixing approved make Perforated C type cable tray. Made

from sheet steel. The cable tray should be single or double bended as per

required and as per IS 2062/1079 and shall be coated with hot dip

galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler

plate / Fish plate and GI hardware like nut - bolt and washers etc. erection

with necessary support( included) as per specification and as per

instruction of engineer in charge.

319 Providing and fixing approved make 'T' Junction for Perforated C type cable

tray. Made from sheet steel. The Junction should be bended as per IS

2062/1079 and shall be coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with coupler plate / Fish plate and

GI hardware like nut - bolt and washers etc. erected on existing support as

per specification and as per instruction of engineer in charge of following

320 Providing and fixing approved make '90° Elbow' for Perforated C type cable

tray. Made from sheet steel. The Junction should be bended as per IS

2062/1079 and shall be coated with hot dip galvanizing as per IS

2629/4759 with coupler plate / Fish plate and GI hardware like nut - bolt

and washers etc. erected on existing support as per specification and as

per instruction of engineer in charge..

(2)100 x 50 x 1.6 mm Thick 90° Elbow 6.00 Nos. 116.15

(3)150 x 50 x 1.6 mm Thick 90° Elbow 6.00 Nos. 163.62

(5) 300 x 50 x 2.0 mm Thick 90° Elbow 6.00 Nos. 245.43

321 Providing & erecting, programming, testing of chairman unit microphone 2.00 Nos. 5992.33

with flexible stem of 480 mm in length and light ring built in loud speaker,

two head phone socket, attractive design ,priority button for chairman

microphone, built in volume control for head phones,chime tone facility to

precede chairman priority calls, microphone on/off button,red indicates for

microphone is active, frequency response -400Hz to 10kHz, nominal

acoustic input -85 dB SPL [Approved by Competent Authority i.e. not below

the rank of Executive Engineer]

322 Providing & erecting, programming, testing of Delegate unit microphone 32.00 Nos. 5565.10

with flexible stem of 480 mm in length and light ring built in loud speaker

,two head phone socket, attractive design ,built in volume control for head

phones, chime tone facility to precede chairman priority calls, microphone

on/off button, red indicates for microphone is active, frequency response -

400Hz to 10kHz,nominal acoustic input -85 dB SPL [Approved by

Competent Authority i.e. not Below the rank of Executive Engineer]

323 Supplying and erecting wall mount speaker with rated power of 30 12.00 Nos. 2569.44

watt/power tapping 30/15/7.5 watt available,opening angle 180 degree H *

77 degree V ,sound pressure level 88 dB, frequency response of 70Hz to

20KHz [Approved by Competent Authority i.e. not below the rank of

Executive Engineer]

324 Supplying & erecting Amplifier having following specification: 2.00 Nos. 11298.87

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

LED Meter :5 LED Arrays

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with

automatic changeover from AC to Battery operation, duly protected by

wrong Battery Polarity connections. [Approved by Competent Authority i.e.

not Below the rank of Executive Engineer]

It. Item of Work Qty. Unit Rate in Amount

325 Supplying, Installing & testing approved make highly sensitive microphone 4.00 Nos. 2740.13

capable to pick up weak sound from longer distance & wider area suitable

for stage shows, group singing with frequency response 50 - 16000 Hz.

having sensitivity of 1.6MV / Pa & impedance 250 ohms (Lo -Z), Supplied

with quick detachable holder & 10 mtr. twin core cable & 3 pin XLR

connector. [Approved by Competent Authority i.e. not below the rank of

Executive Engineer]

326 Supplying & testing wireless microphone system for 92.5 MHz FM 4.00 Nos. 1884.66

operation With effective range 200 feet with microphone having facility for

frequency adjustment & receiver with LED indicator Telescopic antenna

with battery cells.[Approved by Competent Authority i.e. not below the rank

of Executive Engineer]

327 Supplying & erecting approved make motor control cubical panel [Star 2.00 Nos. 13794.58

delta] made from 16G CRCA sheet duly epoxy powder painted inside and

outside with hinged doors and locking with suitable size of ON - OFF

isolator (AC 3 / 23 duty) main fuses. Digital volt and current meter (in a

single unit) with micro controller based control unit and current sensing

single phasing preventer electronic overload protection, over voltage

(Programmable) protection and under voltage (Programmable) protection,

prod less dry run protection programming facility for setting of all parameter

like overload current, high voltage limit, low voltage limit, dry run limit with

digital indication on seven segment LED display for any fault like over load,

high voltage, low voltage, dry running single crimped, electronic star delta

timer, feather touch start / stop push buttons to be erected on angle iron

frame. Grouted on wall the contactors will be of L& T, Siemens, BCH make

only). S/D up to 10 H.P.

328 Lowering of submersible motor pump set at the depth of following, 2.00 Job 2568.43

complete with required. Nos. and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after checking of threads of

each pipe with coupling to take the load of the pump set and pipe assembly

filled up with water. Above 60 mtrs. and Up to 120 mtrs.

329 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat

flexible Submersible copper cable approved make of following size.

(A) 3 Core x 2.5 Sq. mm. 100.00 Mtr. 104.03

(B) 3 Core x 4 Sq. mm 240.00 Mtr. 146.45

330 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 1155.00 Mtr. 46.46

locating the fault all over the run and back filling the same and making the

surface as normal ground.

331 Providing & laying approved make Double walled corrugated pipes (DWC)

of polyethylene (conforming to IS 14930 II) with necessary connecting

accessories of same material at required depth in existing trench for laying

of cable below ground / road surface for enclosing cable.

(A) 50 mm outer dia. 495.00 Mtr. 62.62

(B) 90 mm outer dia. 680.00 Mtr. 95.95

332 SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1.00 Nos. 9416.23

1000 mm long. Air Termination Base tested for conditioning, Ageing Test &

Lightning impulse current withstand test: 100 kA of 10/350µs waveform in

an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1

protocol with MAST 34mm dia 3000 mm long- Cold Galvanized.

i.e. Rs. Twenty One Crore Thirty lacs Three thousand Nine hundred Ninety and Fifty Five paisa only.

I/We am/are willing to carry outDeputy Executive

the work Divisional

@ _______ __ Accountants Officer

% above/below Executive

percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

It. Item of Work Qty. Unit Rate in Amount

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as

directed and to be approved from the Engineer in charge.

6. Credit for dismantalled materials of amount of Rs. 18,31,560.00 must be recovered from 1st R.A. bill of

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Medical Campus Sub Division, City (R & B) Division, City (R & B) Division,

Vadodara Vadodara Vadodara