Various Civil Works such as Parking Sheds, Toilet Block, Retaining Wall, Road Work, Painting etc and Allied works at Milma Malappuram Dairy Project site under MRCMPU Ltd.

Amount

Excavation (manual / mechanical) in all types of soil, including murrum, over areas for land development and similar excavation including shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From NGL to 1.5 m depth

Excavation (manual / mechanical) in all types of soil, including murrum, over areas for land development and similar excavation including shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From 1.5m to 3m depth

Excavation (manual / mechanical) in ordinary rock, over areas for land development and similar excavation including shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From NGL to 1.5 m depth

Excavation (manual / mechanical) in ordinary rock, over areas for land development and similar excavation including shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From 1.5m to 3 m depth

Excavation (manual / mechanical) in hard rock (requiring blasting), over areas for land development and similar excavation including shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From 1.5m to 3 m depth

Excavation (manual / mechanical) in all types of soil, including murrum, for foundations of wall, columns, plinth beams, basement, raft, ducts, trenches, underground sumps, septic tanks, soak well, chambers, gully chambers, including shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From NGL to 1.5 m depth

Excavation (manual / mechanical) in all types of soil, including murrum, for foundations of wall, columns, plinth beams, basement, raft, ducts, trenches, underground sumps, septic tanks, soak well, chambers, gully chambers, including shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From 1.5m to 3 m depth

Excavation in ordinary rock for foundations of wall, columns, plinth beams, basement, raft, ducts, trenches, underground sumps, septic tanks, soak well, manhole chambers, gully chambers, including shoring, strutting, bailing out water/pumping off water if required, removing and stacking simultaneously the excavated stuff any where within the site area complete as directed - From NGL up to 3m depth.

Filling available excavated earth (excluding rock) within the site in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming, watering, etc using mechanical compacter including lead from anywhere within the site as directed.

DR PACKING Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.

Providing and laying in position cement concrete of grade 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) including the cost of centering and shuttering - All work up to plinth level

50.4.1.1 : Providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc.

Providing and laying in position machine batched and machine mixed design mix M- 20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.;Note: Minimum cement content to be used in in this item is @ 330 kg/ cum. Excess cement used as per design mix will not be paid seperately. All work up to plinth level

Providing and laying in position machine batched and machine mixed design mix M- 20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.;Note: Minimum cement content to be used in in this item is @ 330 kg/ cum. Excess cement used as per design mix will not be paid seperately. All work above plinth level upto floor V level

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete in all levels Thermo - Mechanically Treated bars of grade Fe-500 or more

Centering and shuttering including strutting, etc. and removal of formwork for concrete elements in all sizes, shapes and direction including necesosry staging, scaffolding etc for all levels below ground level and upto highest plinth level. Complete

Centering and shuttering including strutting, etc. and removal of formwork for concrete elements in all sizes, shapes and direction including necesosry staging, scaffolding etc in superstructure above plinth level and upto floor V level. Complete

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse sand)

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick to cover

Extra for providing mechanical device chain and crank operation for operating rolling shutters.

Solid block masonry using pre cast solid blocks ( factory made) of size 300x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete.

Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above plinth level up to floor V level thickness 20cm and above in: CM 1:6 ( 1 cement :6 coarse sand) etc complete.

Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.

Providing and laying vitrified matt floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make with a basic price of not less than Rs.45/sqft in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand),including 3mm spacer joints and filled with epoxy etc., complete. Size of Tile 300x300 mm.

Providing and fixing vitrified glazed tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make with a basic price not less than Rs.45/sqft, in all colours, shades of any size as approved by Engineer -in-Charge, in skirting, over tile adhesive for wall tile fixing including 3 MM spacer and joints fill with epoxy of the same brand.

Providing and fixing vitrified designer wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make with a basic price not less than Rs.55/sqft, of any size as approved by Engineer -in-Charge, over tile adhesive for wall tile fixing including 3 MM spacer and joints fill with epoxy of the same brand.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Light shade pigment using white cement

Providing and applying 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) including all cost of materials, labour, scaffoldings etc complete.

9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) for ceiling including all cost of materials, labour charges, scaffoldings etc complete

Providing & fixing expansion joint treatment up to 50mm thick joint with Sikadur Combiflex SG Tape Tape of size 200x1.00mm thick Complete in all respect as per manufacturer specification and methodology through authorised applicator including surface preperation , epoxy adhesive tape , accessories as recomended by manufacturer etc as directed by engineer-in-charge including removing and refixing the existing alumimium sheet laid over the expansion joints.

Providing and fixing aluminium sheet 20 gauge, 200mm wide on the expansion joint. One end of the sheet to be fixed with SS screw and other end to be kept partially free by making an elliptical slot/ V shape and fixing with the SS screw so as to allow for the expansion of the building and consequent movement of the aluminium sheet includes all labour material, scaffolds etc. complete. as directed

Supplying & Application of Pressure Grouting with PU based Injection Grout Materials as per detailed technical specification so that the injected material penetrates fine cracks and cavities to form an impreamable elastic seal to arrest the leakage. The rate shall include all chemicals, labours, tools and tackles etc., complete as per manufacturers methodology .

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured)

Providing and applying two or more coat Premium Acrylic Smooth exterior paint with Silicone additives (apex ultima or equivallant) of required shade applied as per manufacture recommendations over one coat exterior primer applied as per manufacture recommendations including all labour charges and materials for necessary scaffolding, required ladders etc for applying paint in all kind of walls over existing cement paint surface complete asper technical specification. (The surface are to be properly cleaned for the removal of algae, dirt etc by using bleaching powder or other chemical agents and the broken surface, grooves and cracks shall be treated with putty to make it smooth before application of paint and engineer in charge inspect the site and verify) (The painting work shall be done by an authorised applicator of the manufacture and warrantied for minimum 7 years by the manufacture)

Providing and applying two or more coat Premium Acrylic Smooth exterior paint with Silicone additives (apex ultima or equivallant) of required shade applied as per manufacture recommendations including all labour charges and materials for necessary scaffolding, required ladders etc for applying paint in all kind of walls over existing cement paint surface complete asper technical specification. (The surface are to be properly cleaned for the removal of algae, dirt etc by using bleaching powder or other chemical agents and the broken surface, grooves and cracks shall be treated with putty to make it smooth before application of paint and engineer in charge inspect the site and verify) (The painting work shall be done by an authorised applicator of the manufacture and warrantied for minimum 7 years by the manufacture)

Providing and applying one coat of water thinnable cement primer or as per manufacture recommendatons of approved brand and manufacture on wall surface including all labour charges and materials for necessary scaffolding, required ladders etc for applying paint. (make: asian or equivallant)

Providing and applying two or more coat Premium acrylic emulsion paint (apex apcolite or equivallant) of required shade as per manufacture recommendations including all labour charges and materials for necessary scaffolding, required ladders etc for appliying paint in all kind of walls over existing cement paint surface complete as per technical specification. (The surface are to be properly cleaned for the removal of algae, dirt etc by using bleaching powder or other chemical agents and the broken surface, grooves and cracks shall be treated with putty to make it smooth before application of paint and engineer in charge inspect the site and verify) (The painting work shall be done by an authorised applicator of the manufacture)

Providing and applying two or more coat Premium acrylic emulsion paint (apex apcolite or equivallant) of required shade as per manufacture recommendations over one coat approved interior primer as per manufature recommendations including all labour charges and materials for necessary scaffolding, required ladders etc for appliying paint in all kind of walls complete as per technical specification. (The surface are to be properly cleaned for the removal of algae, dirt etc by using bleaching powder or other chemical agents and the broken surface, grooves and cracks shall be treated with putty to make it smooth before application of paint and engineer in charge inspect the site and verify) (The painting work shall be done by an authorised applicator of the manufacture.)

Finishing with Epoxy paint (make: MRF or equivallant) (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

Providing and applying two coat water proof cement primer of approved make as per manufacture recommendations including all labour charges and materials for necessary scaffolding, required ladders etc

Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two coats (make: asian or equivallant)

Cement relief art work as per approved design and theme using cement plaster coated with putty and painted with acrylic smooth exterior paint over exterior primer for colours with final polishing including preparation of surface, cost of materials, labour charges etc. complete

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness

Providing and fixing 3 mm thick Aluminium composite panel having mineral core sandwiched between two 0.25mm thick aluminium sheets(, in panelling fixed in aluminum doors, windows shutters and partition frames with EPDM rubber / neoprene gaske, stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.

Providing and fixing removable/hinged fly proof mesh/screen made of powder coated aluminium extruded sections of size 24x12mm(min 0.200kg/m) or equivallant for fly screen shutter frames fixed to basic frame work. The fly proof stainless steel 304 grade wire gauge with average width of aperture 1.4mm in both directions and wire of diameter 0.5mm shall be fixed to the shutter frame using EPDM/Neoprene gasket including screws, hinges, fastners, nuts, bolts etc. complete.

Providing and fixing louvered ventilator made of 5mm thick approved shaded glass fixed to powder coated aluminium extruded frame of size 63.5x38.1x1.5mm including fastners, screws etc. complete. (It shall be measured out to out of the outer frame work))

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness

21.13 : Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete

Providing and fixing powder coated aluminium profile handles in required colour or shade, with necessary screws etc. complete:200 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

9.97.5 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm

Providing and fixing FRP moulded type door frame and shutters from extruded PVC sections 90mm x 60mm having multichamber cross section with minimum 1.5mm wall thickness and duly reinforced with steel to be mitre cut at corners and welded for frame and 30mm thick factory made door shutters. A tie rod to be provided at bottom and top. including handle, ss slide latch lock, necessary weather seals etc.

Providing and fixing in position Powder Coated Galvanised steel sheet openable single or double leaf doors of 40mm thick with galvanized steel sheet frame, of specified size and shape fabricated out of 0.8mm to 1.2mm thick galvanised steel sheets with resin bonded honeycombed core as infill including vision panel with 6mm thick toughened glass, Galvanised steel sheet frame of 100mm X 60mm X 1.2mm wall thickness including supplying and fixing ball bearing butt hinges of 100mm X 75mm X 4mm, screws, necessary holdfasts / screws for fixing, clits, Stainless Steel Tube Glass Door Pull Handles D-22x300 TPH- 301C a pair for each leaf in approved shape size and finish, for each leaf on both, Mortise dead lock with SS accessories, Euro profile 6 pin cylinder 70mm key, heavy duty leaf mounted door closer as per the recommendation of the manufacturer and all fixtures, fastenings and accessories as per requirement and recommended by manufacturer including filling the gap if any between masonry/ concrete/ stone surface of soffit/jambs/cill and frame by approved gun grade suitable silicon sealant of matching color /transparent with all labour and materials complete as per drawings and as directed. (Measurement :out to out of door frame.) (Notes-Butt hinges shall be of stainless steel SS304 grade. For double shutter , stainless steel tower bolt (two nos.) Door stopper to be provided.)

Supply, fabricate and erect in position structural steel work for trusses, purlins, girder, column, rafters, struts, wind ties, floor tile beam, structural members for strew box, side cladding, platform etc. as per design including bolting, welding in rolled steel sections and plates with all necessary nuts, bolts, riverts, gusset, plates etc. complete including painting with two coat of epoxy primer(MRF or equivallant) and 2 coat of synthetic enamel paint (MRF or equivallant) finished to even shade as per technical specifications.

Supply, fabricate and erect in position MS tubular sections (round, square or rectangular hollow tubes etc.) for trusses, purlins, girder, column, rafters, struts, wind ties, floor tile beam, structural members for strew box, side cladding, platform etc. as per design including bolting, welding in rolled steel sections and plates with all necessary nuts, bolts, riverts, gusset, plates etc. complete including painting with two coat of epoxy primer(MRF or equivallant) and 2 coat of synthetic enamel paint (MRF or equivallant) finished to even shade as per technical specifications.

Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and one coat synthetic enamel paint, including welding and bolted with special shaped washers etc. complete

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying two coat epoxy primer and two coat epoxy paint (MRF or equivallant) using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates, doors and similar works

Providing and fixing in position MS chequered plate for covers of trenches including cutting, welding as required, grinding the sharp edges / corners, painting with two coat epoxy primer (MRF or equivallant) and two coat epoxy paint (MRF or equivallant) etc.complete as specified and as directed.

Providing and fixing in position SS-304 grade chequered plate for covers of trenches including cutting, welding as required, grinding the sharp edges / corners, painting with two coat epoxy primer (MRF or equivallant) and two coat epoxy paint (MRF or equivallant) etc.complete as specified and as directed.

Providing and fixing G.I. weld mesh of required width to MS frame work in mesh size 50x50 mm made of G.I. wire of dia 3 mm including the MS frame work made of 40mm MS angles, flats and Tees in grids not more than 1.5m. The work shall include the cost of materials, labour, tools, cutting, welding, fixing to wall/column etc complete as per the direction of Engineer in charge to the frame, The frame work shall be formed so that no sagging of weld mesh occures.

Providing and fixing G.I hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying two coat epoxy steel primer (MRF or equivallant) and one coat epoxy paint (MRF or equivallant). complete

Providing and fixing M.S insert plates, channels or angles of specified size and thickness welded to reinforcement steel and embedded in concrete in line and level as per the direction of Engineer in charge.

Providing and fixing MS round holding down bolts/anchor bolts\foundation bolts etc of specified size and diameter with nuts, washer complete as per the direction of Engineer in charge

Providing and grouting the foundation bolts/pockets, base plates etc with ready mixed non shrink, free flow, self levelling, cementitious grout M60 grade in concrete, curing etc. as per the recommendations of the manufacturer, complete as directed. (The weight of actual quantity of non shrink grout powder used will be measured for payment)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete: Ridges/ flashings

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete: Crimp curve

Providing and fixing 200mm Square type PVC gutter including all fittings, drop, clamps, materials, labour etc complete.

17.1.1 : Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providing and fixing white vitreos china urinal partition of approved make.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank (white) :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge Concealed work, including cutting chases and making good the wall etc. 15 mm pipe 10kgf/cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. concealed work, including cutting chases and making good the wall etc. 40 mm pipe 10 kgf/ cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 10 kgf/cm2

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 200 mm dia 4 Kgf/cm2 - External work- Exposed on wall for rain water

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 160 mm dia 4 Kgf/cm2 - External work- Exposed on wall for rain water

Providing and fixing PVC pipes, fittings including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes and fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 4 Kgf/cm2 - External work- Exposed on wall for rain water

od274542/2021_2022 : Providing and fixing PVC pipes, fittings including jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

od274543/2021_2022 : Providing and fixing PVC pipes, fittings includings jointing of pipes and fittings with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2

od274544/2021_2022 : Providing and fixing PVC pipes, fittings including jointing of pipes and fittings with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2

od274545/2021_2022 : Providing and fixing PVC pipes, fittings including jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 200 mm dia 6 Kgf/cm2

od274546/2021_2022 : Providing and fixing PVC pipes, fittings including jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 160 mm dia 6 Kgf/cm2

Providing and fixing UPVC ball valve :40 mm nominal bore

Providing and fixing UPVC ball valve :32 mm nominal bore

Providing and fixing UPVC ball valve :25 mm nominal bore

Providing and fixing UPVC ball valve :20 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.:15 mm nominal bore

Providing and fixing C.P. brass angle valve of approved quality conforming to IS: 8931: 15 mm nominal bore

Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

Supply and Installation of Brass bib tap with hose union for water with necessary connectors to pvc or upvc pipe, with all supports, fixing and fitting IS 781 (1984), PN16

Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

Supplying and fixing CP Towel hook approved quality

Providing and fixing 110mm PVC multi floor trap

Providing and fixing Rectangular type 150x150mm SS 304 gratings of approved quality.

Supply and Installation, of ISI marked FRP manhole cover(Thermodrain/Fibrocast or equivallant) and frame conforming to the latest relevant IS specifications. Size: 30cmx30cm

Providing and fixing frameless mirror complete, with all four edges machine polished/bevelled and back side protected with safety film and 4 mm thick BWP grade Plywood backing and fixed on walls with mirror screws(spacer). The rate is including cost and conveyance of all materials, labour charges, lead,lift ,cutting and making good the walls, floors,slab etc complete as<br>directed by the Engineer in charge at all levels

Providing and fixing SS 304 grade Amul trap of hygienically designed main body with 8mm thick SS 304 grade top plate having 10mm slots. Inside filter shall be circular shape having 8mm dia holes and dia 150mm pipes which is having 25mm holes to filter small particles.

Constructing manholes of size 0.6x0.6m(clear inside) of depth up to 1m including excavation, 100mm thick PCC in 1:5:10,15cm foundation concrete and 15cm thick RCC wall in RCC 1:1.5:3, wall plastering CM 1:4 both inside and outside, benching and channeling with PCC 1:2:4 and finishing the channel smooth RCC top cover of 10cm thick setting and fixing CI manhole cover of 550 mm dia medium duty.

Constructing manholes of size 1x1m(clear inside) of depth exceeding 1m up to 2m including excavation, 100mm thick PCC in 1:5:10,15 cm foundation concrete and 20cm thick RCC wall in RCC 1:1.5:3, wall plastering CM 1:4 both inside and outside, benching and channeling with PCC 1:2:4 and finishing the channel smooth RCC top cover of 10cm thick setting and fixing CI manhole cover of 550 mm dia medium duty.

15.3 : Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

15.2.2 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

Cutting holes up to 30x30 cm in masonry walls including making good the same

Charges for core cutting of slabs/beam depth up to 150mm, including labour , conveyonce,supports, disposal of debris etc. size up to 110 mm dia

Charges for core cutting of slabs/beam depth up to 150mm, including labour , conveyonce,supports, disposal of debris etc. size : 150mm dia to 200mm dia

19.6.4 : Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:300 mm dia R.C.C. pipe

16.1 : Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.

Providing , laying spreading and compacting graded stone aggregate ( size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub - base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer - in- Charge. (in minimum 2 layers)

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M - 35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

4.6.1 : Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), including the cost of required centering, shuttering complete.1:1.5:3 ( 1 cement : 1.5 coarse sand (Zone III): 3 graded stone aggregate 20 mm nominal size)

Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means.

Providing and applying tack coat with bitumen emulsion (RS) using emulsion pressure distributor at the rate of 0.25 - 0.30 kg per sqm on the prepared Granular Surface cleaned with mechanical broom.

Providing and laying bituminous macadam with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder (VG 30), transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. For Grading I ( 40 mm nominal size )

Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) aggregates using viscosity grade bitumen ( VG - 30) to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable HMP of appropriate capacity not less than 75 tonnes/hour., laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade.

Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 75 tonnes/ hours using crushed stone chipping 6.7 mm size and bitumen (VG-30) 6.8 kg per 10 sqm

Tati construction Pvt. Ltd.

Anil Santhosh and Assosiates

Mapsglobal constructions Private Limited