RENOVATION AND MODERNIZATION OF K.L.B.M.C. STRUCTURES AT CH: 33740 m to CH. 38242.0 m (Package-9)

BILL Of QUANTITIES

BILL OF QUANTITIES

Name Of Work : RENOVATION AND MODERNIZATION OF K.L.B.M.C.

STRUCTURES AT CH: 33740 m to CH. 38242.0 m (Package-9)

ITEM QTY. UNIT COST PER UNIT

Dismentalling the C.C Lining including

disposing off the dismentalled

1 materials as directed etc. complete.

(a) 7.50 cm thick

Dismentalling the existing stone

masonry including sorting out and

stacking the useful materials and

2 removing the debries and making

good the damage etc. complete as

Dismentalling the R.C.C.work &

disposing off the stuff including

stacking of the useful materials etc.

3 complete as directed. a)Light

reinforcement.(Main bar upto 16mm

Dismentalling the existing foundation

concrete including disposing the

dismentalled stuff including sorting

4 out and stacking the useful materials 1413.95 Cum. 1165.20

and removing the debries and making

good the damage etc. complete as

directed.(b) In cement concrete.

Dismentalling the existing R.C.C.pipes

of the following diameter including

sorting out and stacking of the useful

5 materials including refilling the 960.00 Rmt 1281.70

trenches etc. complete as directed.

(NP-2 pipes).(d) 1000 mm to

Excavation for foundation in all sorts

of soil including yelloow,

sandy,gravelly soil,soft & Hard

murrum etc. Dry Condition Including

6 depositing the excavated stuff in 3449.49 Cum. 81.50

uniform layers in banks or as directed

etc. complete for lead up to

km.and all lift (by machinery) (A)

Above Water Table

Excavation for foundation in soft rock

including depositing the excavated

stuff as and where directed etc.

7 complete for lead upto 1.0 Km and all

lifts.(By machinary). (b) Below water

Excavation for foundation in all sorts

of soil including yellow, sandy,

gravelly soil, soft & hard murrum, etc.

dry condition including depositing

8 the excavated stuff in uniform layers

in banks or as directed etc. complete

for lead uo to 1.0 Km and all lifts. (By

Providing and laying plain/

reinforced Design Mix cement

concrete of various grade with

cement, sand and coarse aggregates

including centering, shuttering,

batching, mixing, transporting,

9 placing, vibrating, smooth finishing, 991.51 Cum. 4380.90

curing etc. complete for all lead and

lift.(Baching Plant Based, Including

dewatering). Raft, Bottom slab of

barel, footing of columns, piers,

abutment and bottom slab of sump

etc.(i) M-15 grade.

Earthwork in embankment using soil,

soft & hard murrum excavated from

approved borrow area/village tanks

10 etc.including breaking clods, dressing 1638.00 Cum. 118.10

to the design section with lead up to

5.0 kilometer and all lifts.(By poclane

Providing and fixing in position

mm dia PVC pipe weep holes in

11 abutment, wing wall, and laying

training etc. complete.

Providing and laying plain/

reinforced Design Mix cement

concrete of various grade with

cement, sand and coarse aggregates

including centering, shuttering,

batching, mixing, transporting,

12 placing, vibrating, smooth finishing,

curing etc. complete for all lead and

lift.(Batching Plant Based, Excluding

dewatering).Raft, Bottom slab of

barel, footing of columns etc.(iv) M-25

(D) Walls of barrels, brestwall,

12- staunching rings, pedestals of

A bearing, stoplog piers, well staining,

transitionwall, etc. ( iii ) M-25 grade

(E) Roadway slab, approach slab,

12- chute floor slab, kerb, pier cap,

abutment cap, hoisting platform, top

slab of barrel etc. ( iii ) M-25 grade.

Providing and placing in position

reinforcement bars including cutting,

bending welding, joints where

13 necessary, hooking etc. complete as

per drawing for all lead and lifts.(b)

Providing and fixing in position PVC

heavy duty water stops in barrels,

trough, and wing wall with 25 mm

wide expension joint as shown in

14 drawing including filling the joints

with asphalt pad or bitumins or cork

board of approved quality.(B) 300mm

wide PVC water stop

(A) 225 mm wide PVC water stop 62.08 Rmt 384.90

Providing panel pitching having

panels of 3.0 m x 3.0 min cement

concrete 1:3:6, 0.30 wide and

0.60m deep around panels

including filling the panels with

dry rubble 0.45 m thick and filling

the voids with earth as directed.

Providing and laying plain/

reinforced Nominal Mix cement

concrete of various grade with

cement, sand and coarse aggregates

including centering, shuttering,

batching, mixing, transporting,

16 placing, vibrating, smooth finishing,

curing etc. complete for all lead and

lift.(Manually With Conventional

Mixer, Excluding

dewatering).Foundation.(ii) M-10

Earthwork/Back filling with selected

earth including watering

17 ramming,Compaction with pnuematic 8916.77 Cum. 144.50

temping with all lead and all lift etc

Providing and laying plain/reinforced

cement concrete lining of M 15 (MSA

20 mm) in bed, side slopes and

curvature including batching, mixing,

transporting, placing, vibrating,

smooth finishing, curing including

18 dewatering where required.

(MACHINERY BASED by "BATCH MIX

PLANT & TRANSIT MIXER" -

WITHOUT PAVER MEMBRANE

CURING) 20 cm thick lining in Bed /

Providing and laying

plain/reinforced Design Mix

cement concrete of various grade

with cement, sand and coarse

aggregates including centering,

shuttering, batching, mixing,

transporting, placing, vibrating,

19 smooth finishing, curing etc. 122.22 Cum. 5228.00

complete for all lead and

lift.(Baching Plant Based,

Including dewatering) (D) Walls

of barrels, brestwall, staunching

rings, pedestals of bearing, stoplog

piers, well staining, transitionwall,

etc. ( iii ) M-25 grade

Providing and laying

plain/reinforced Design Mix

cement concrete of various grade

with cement, sand and coarse

aggregates including centering,

shuttering, batching, mixing,

20 transporting, placing, vibrating, 497.35 Cum. 5025.10

smooth finishing, curing etc.

complete for all lead and

lift.(Baching Plant Based,

Including dewatering) Piers,

abutment, wingwalls, headwall,

returnwall etc. (iv) M 25- grade

Providing and laying

plain/reinforced Design Mix

cement concrete of various grade

with cement, sand and coarse

aggregates including centering,

shuttering, batching, mixing,

transporting, placing, vibrating,

smooth finishing, curing etc.

complete for all lead and

lift.(Baching Plant Based,

Including dewatering) (E)

Roadway slab, approach slab,

chute floor slab, kerb, pier cap,

abutment cap, hoisting platform,

top slab of barrel etc. ( i ) M-15

Providing and laying

plain/reinforced Design Mix

cement concrete of various grade

with cement, sand and coarse

aggregates including centering,

shuttering, batching, mixing,

22 transporting, placing, vibrating, 874.46 Cum. 4499.60

smooth finishing, curing etc.

complete for all lead and

lift.(Baching Plant Based,

Including dewatering)(C)Piers,

abutment, ingwalls, headwall,

return wall etc. ( ii ) M-15 grade.

Providing and casting in situ

ordinarycement concrete M-200

for average 75 mm thick wearing

23 coat laid as directed including 13.46 Cum. 4046.74

tamping ,vibrating, finishing,

curing and filling in joints with

bitumen complete.

Constructing 1 m. wide steps in

brick/ stone masonry in c.m. 1 :5

dam slopes as per approved

drawing including excavation etc.

complete for zero leads and lifts.

(a) Using bricks works.

Excavation of canal/drains in all

sorts of soils (including wet and

slushy condition of soil) including

depositing the excavated stuff in

uniform layers in canal banks or in

spoil banks or as and where

25 directed including dressing the 22590.00 Cum. 82.40

canal section upto lead of 50 meter

and all lift including clearing the

site etc. complete (By machinery

for canal/drain maintanance) (up

to 1.5 cumecs capacity of

Providing & fixing in position sign

boards of standard size

0.45mx0.30m with M.S.angle

40mmx40 mmx6mm with 3mm

thick iron plate fixed in 1:5:10

prop. Concrete block size

40cmx40cmx75cm including

radium paint on both side etc.

Providing videography on the

ocassion of function or for on

going construction work including

dubbing, titeling etc. complete

including cost of cassette/CD.(b)

Up to 4.00 hours

Providing inspection steps while

lining along canal slopes as per

drawing etc. Completeas

Supplying and laying trap rubble

stone of 10 to 30 kg. in weight for

toe and core filling including

conveying and stacking to

required line level, slope section

including all leads and lifts,

conveying materials from stacks

and laying etc. complete.

Providing and filling sand below

30 R.C.C. raft in layers including 45.28 Cum. 445.41

raming and watering complete.

Providing inverted filter of 8 cm.

sand and 8 cm. gravel below/

behind wall/ pitching including

laying to correct slopes after

necessary trimming of earth work

Providing G.I. 100mm diameter

32 water spouts including necessary 18.00 Nos 536.03

iron gratings as per drawings.

Suppliying and Spreading the

graded stone aggregate for rolling

and W.B.M. including filling the

33 interstices to required camber 73.13 Cum. 924.04

and gradient (excluding spreading

of Blindage)(ii) 40mm to 63mm

size aggreagates (H.B.)

Providing and filling the

polysulphide joint selent of the

approved make in the expansion

and contraction joints in the c.c.

lining including clearing the joints

with air water jet.

Finishing wall with water proofing

cement paint on wall surfaces

(Two coats) to give an approved

brand and manufacture and of

reqd. shape even shade after

thoroughly brushing the surface

to remove all dirt and remains of

loose powdered materials.

Providing and fixing in position

Sign board of standard size 1.20m

x 0.90m with M.S. angle 40mm x

40mm x 6mm with 3mm thick iron

36 plate in 1:5:10 proportion 5.00 Nos 3011.30

concrete block size 40cm x 40cm x

75 cm including painting existing

data on the board etc. complete as

Providing and Erecting a "W"

metal beam CRASH BARRIER

comprising of 3 mm thick

corrugated sheet metal beam rail,

70 cm above road/ground level

fixed on ISMC series channel

vertical post, 150 x 75 x 5 mm

space 2.00 m centre to centre

m high 1.10 m below ground/road

level fixing at site shall be in C.C. M

- 20 block of size 50 x 50 x 100 cms

for each post. All steel parts and

fitments to be galvanized by hot

dip process, all fitting to conform

IS : 1367 and IS : 1364 metal beam

rail to be fixed on the vertical post

with a spacer of section 150 x 75 x

5 mm 3.30 m long complete as per

MORTH Clause 810. Rates

including providing and fixing

mm thick ACM type reflactor

mm wide, type4, class-B, High

inensity grade sheeting between

two 'W' metal beam throught and

reflactive unit at the top of vertical

post as per IRC : 67 - 2012 etc.

complete as per detailed drawing

and directed by engineer-in-

charge. (Metal beam crash barrier

Compaction of selected

soil/hardmurrum/soft murrum in

even thickness of 15 to 20 cms

including watering rolling of

suitable capacity etc. complete as

Providing and fixing in position

pre moulded asphalt or bitumin

cork board of approved quality

and specification as per design

and drawing as directed. B)20

Providing gauge plate of following

size of material fibre glass

reinforced plastic with engraved

bands width and figures with

necessary clits and fastenersand

fixing the same at the site of work

etc complete asdirected For

mt. x 1.0 mt. gauge patti.

Providing and laying

plain/reinforced cement concrete

lining of M 15 (MSA 20 mm) in

bed, side slopes and curvature

including batching, mixing,

transporting, placing, vibrating,

smooth finishing, curing including

dewatering where required. 20 cm

thick lining in bed (MACHINERY

BASED by "BATCH MIX PLANT &

TRANSITMIXER" - WITHOUT

PAVER WATER CURING)

Manufacture, supply and erection

of vertical gate consisting gate

leaf, stiffeners, rubber seal,

embedded parts as shown in

drawings including cost if

materials, fabrication, painting,

erection in position with all

accessories second stage

concreting etc complete as per

drawing and specifications. OPEN

TYPE GATES Gate Size (2m X

Providing water proof cement

plaster 20mm thick in cement

mortar 1:3 proportion with one

kilogram of water proofing

material per bag (50 Kg) of cement

including cleaning the surface,

neat finishing, curing scaffolding

etc. complete for all leads and lifts.

Desilting of various structure of

canals and distribution sysytem

including depositing the same as

directed with all leads and lift.

Providing and laying uncoarsed

rubble masonary in ordinary

portland cement mortar 1:5

proportion in foundation

including curing etc. complete for

all leads and lifts.

Supplying i.e. Manufacture,

Transportation and Erection of

Screw Hoist for Vertical Gate

including Performance Test.

Manufacture, Supply and Erection

of hand operated Screw Hoist with

Hoist plateform for operating the

Vertical Gate consisting of

46 padestal, housing stem rod lifting 2.00 Nos 179856.00

nut, worm and worm gear, thurst

bearings, gate position indicator,

Fabricated Hoist plateform with

all accessories, painting second

stage concreting with anchor bolts

for hoist plateform to enable the

lifting stoping and lowering the

gate to ensure smooth and

watertight operation ect.

Complete as per Drawings and

Specifications.

Gate Size (2m X 2.05m)

Manufacture, supply and erection

of vertical gate consisting gate

leaf, stiffeners, rubber seal,

embedded parts as shown in

drawings including cost if

47 materials, fabrication, painting, 2.00 No. 72278.02

erection in position with all

accessories second stage

concreting etc complete as per

drawing and specification. OPEN

TYPE GATES. 1.15X2.50

Providing & fixing in position

structural steel / chequered plate

including fabrication by Cutting

welding and one coat of red oxide

Providing & Laying in position

with Automatic Batchmix Plant &

Transit Mixer "DESIGNMIX"

cement concrete using cement

sand and crushed aggregate for

C.C./ R.C.C work including

necessary formwork, centering,

scaffolding, compaction by

vibrator, curingas directed with all

lead & lift etc. complete without

dewatering and excluding the cost

of steel reinforcement. D) For

Kerb / Wearing coat. J) Concrete

grade M-25 and MSA -10 to 20mm

Providing and fixing post and

mm dia pipe railing as per detailed

drawing including angle iron post

of size 80mm x 50mm x 10mm

(Height 1.2mt) fixed in C.C. block

(M-15 MSA20mm) of size 0.30 m x

0.30 m x 0.30 m etc. as per

specifications including 3 coats of

oil painting to steel work and as

directed etc. complete.

I/We am/are willing to carry out the work at… ...................... % above/below percent

(Should be written in igures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

Contractor Executive Engineer