PSM-Annual Maintenance and Operation of Odenchira Regulator for the Year 2020-21

Amount

Appendix A

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work as directed by the departmental officers at site

14.55.1 : Painting with aluminium paint of approved brand and manufacture to give an even shade:One or more coats on old work as directed by the departmental officers at site

od14932/2020_2021/IA : 2017/IA :Supplying and placing in position quarry dust filled cement bags including tying withcoir yarn and placing the same in position as directed by the departmental officers at site

od14933/2020_2021/IA : Engaging heavy load man mazdoor for operating shutter for applying greeze and oil as directed by the departmental officers at site

od14934/2020_2021/IA : Supplying best quality grease for use of regulating shutters at average quantity of 3 Kg per one shutter etc.complete as directed by the departmental officers at site

od14936/2020_2021/IA : Supplying lubricating oil for regulator shutter operating mechanism as directed by thedepartmental officers

od14937/2020_2021/IA : Supplying best quality cotton waste for regulator shutters as directed by departmental officers

od14938/2020_2021/IA : labour engaged for removing blockages and obstructions at the vent upstream and downstream of the chira etc.complete as directed by the departmental officers at site

14.53.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work as directed by the departmental officers at site

od14939/2020_2021/IA : Clearing kulavazha deep rooted weeds and other types of floating substances from the river in or under water and depositing the same in places away from the periphery of the river with all leads and lifts as directed by the departmental officers

5.22.4 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHot rolled deformed bars as directed by the departmental officers at site

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) as directed by the departmental officers at site

4.3.3 : Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts as directed by the departmental officers at site

50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete as directed by the departmental officers at site

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as directed by the departmental officers at site

6.27.2A : Brick work with common burnt clay modular bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand).Above plinth level below floor 2 level as directed by the departmental officers at site

13.7.2 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand) as directed by the departmental officers at site

9.1.3 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated Hollock wood as directed by the departmental officers at site

14.5.2 : Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 5.5 mm as directed by the departmental officers at site

SURESH KUMAR

Bidder Name

krishnankutty

SURESH KUMAR