SR to admin office building at port Jafrabad.

Item No Quantity Unit Amount

to book of specifications) figures

Dismantling tiled or stone floors laid in mortar including

ITEM NO.1 stacking of seviceable materials and disposal of unserviceable 635.00 SQM 59

materials with all lead and lift.

Provinding and laying inegrated cement based water proofing

treatment of required thickness over the roof, chaina mosaic

fitting and finally finishing the surfase with white cement slurry

and slopping out tarrace slabs with following specification laid

to required slope not flatter than 1:80 ( the thickness of water

proofing treatment near rainwater outlet or the lowest point of

the finished slope shall not be less then 45mm, including

ITEM NO.02 treating the vertical surfase of the parapet wall up to 20cms . 260.00 SQM 967.32

height above finished level of terracing including finishing the

top with joint less water proofing plaster, curing, testing etc.

complete. (No extra shall be paid for increase in thickness for

proper slope).

(A) Applying and grouting a slurry coat of neat cement using

2.75 kg/sqm. of cement admixed with properly water proofing

compound conforming to IS -2645 incl. cleaning the surface

Dismantling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats, holdfasts and other attachment

ITEM NO.03 65.00 EACH 249.1

etc. complete and stacking them within all lead and lift.

( i ) Not exceeding 3 sq.m. in area

Dismantling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats, holdfasts and other attachment

ITEM NO.04 1.00 EACH 330.2

etc. complete and stacking them within all lead and lift.

( i ) exceeding 3 sq.m. in area

Dismantling steel work, including dismembering and stacking

ITEM NO.05 1448.00 KG 6.4

the materials with all lead and lift.

Providing & fixing 18 mm thick first quality Black Polished

Granite stone approved by Client/Architect for Doors - windows

Frame, Lintel, jambs & sill in cement mortar (1:3) including

ITEM NO.06 cutting, fixing in cement paste with hairline joint, filling the 109.00 SQM 2874.2

joints with white cement / pigments / joint filler,rounding of

edges, edge polishing & finishing as directed by the Engineer.(

fixing the granite in one piece )

Providing 10mm Thick cement plaster in single coat on wall for

ITEM NO.07 Interior plastering up to level and finished even and smooth in 145.00 SQM 197.6

cement Mortar 1:3 (1 Cement : 3 Sand)

Providing and Fixing MS Grills of required pattern to wooden

frames of windows etc. with MS flats at required spacings and

ITEM NO.08 1070.00 KG 138.3

frame around, square or round bars with round headed bolts

and nuts or by screws ( A ) plain grills

Providing and Fixing anodised alluminium section Three track

windows with outer frame 91.5 mm x 31.5 mm of 19G,

weighing 0.92 kg/m and shutter frame 34.5 mm x 15.80 mm of

ITEM NO.09 37.00 SQM 2900

19G, weighing 0.38 kg/m with all arrangement for fixing, PVC

weather strip, spring handles and other fixtures etc including

fixing 4mm glass of approved quality as directed etc complite.

Providing and Fixing anodised alluminium section Two track

windows with outer frame 61.5 mm x 31.5 mm of 19G,

weighing 0.57 kg/m and shutter frame 34.5 mm x 15.80 mm of

ITEM NO.10 21.00 SQM 2668

19G, weighing 0.38 kg/m with all arrangement for fixing, PVC

weather strip, spring handles and other fixtures etc including

fixing 4mm glass of approved quality as directed etc complite.

Providing and fixing 35 mm thick Flush door shutters

including fixing 1 mm thick exterior lamination over it on both

sides, peripheral 2 x 3 cm moulding patti with colour, with

Stainless Steel hinges size - 6" x 1.25", dead lock with 4 key , SS

ITEM NO.11 18.00 SQM 4545.00

handle size 30 cm Long, SS Tower Bolt (Stoper) size 20cm long,

as per detail including one coat of primer and two coats of oil

painting as and where required, pattern and design is to be

approved by the Architect/EIC.

Providing and Fixing fiber glass moulded door frame,

champhered type of size125 x 65 mm having fire extinguishing

grade FRP skin of 1.5 to 2mm thickness with extra

reinforcement on sides and edges and in "Gel" coat finish.

Remaining hollow portion is to be filled with injected fire

ITEM NO.12 extinguishing grade polyurethane foam (PUF), done in situ 49.80 SQM 2019.3

along with embeded wooden peices for stiffening and taking

hinges. In built holdfast arrangement is to be provided for fixing

with masonary or RCC. Whole section is to be waterproof,

weather proof, termite proof and mild acid / alkali resistant.

Providing & Fixing 35mm thick fiber glass shutter with 1.5 to

2.0mm fire extinguishing grade FRP skin in raised panel design

having extra reinforcement on sides and edges and in Gel coat

finish. The core of shutter is to be filled up with injected fire

extinguishing grade polyurethene foam done in situ along with

ITEM NO.13 16.38 SQM 4220.9

embeded wooden pieces for stiffening and also for taking hinges

and fixtures. the whole shutter is to be waterproof,

weatherproof, termiteproof and resistance to mild acid / alkali,

including SS hinges with necessary screws and SS fixtures and

fastenings.

Providing & Fixing in position collapsible steel shutters with

vertical channels 20 x 10 x 2 mm braced with flat iron diagonals

20 x 5 mm size, top and bottom rails of T- iron 40 x 40 x 6 mm,

ITEM NO.14 5.25 SQM 8038.8

and 38 mm dia steel pulleys complete with bolts, nuts, locking

arrangements, stoppers handles including applying a priming

coat of red lead paint.

Providing and Fixing glazed louvered glass windows and

ventilators with teak wood frame 10cm x 7cm size including

ITEM NO.15 6.12 SQM 4916.3

coats of oil painting and MS bars 16mm dia. fixed at spacing not

exceeding 100mm c/c etc. complete

Dismantling Old Plaster racking out joint and cleaning the

ITEM NO.16 surface to make ready for new plastering icluding disposal of 652.00 SQM 45.9

rubbish to the dumping ground with all lead and lift

Providing 10mm Thick cement plaster in single coat on wall for

ITEM NO.17 Interior plastering up to level and finished even and smooth in 290.00 SQM 197.6

cement Mortar 1:3 (1 Cement : 3 Sand)

Providing 10mm Thick Cement Plaster in Single Coat on Ceiling

ITEM NO.18 and soffits of stairs for Interior plastering up to floor Two level 61.00 SQM 228

and Finished even and Smooth Cement Mortar 1:3(1 Cement :

Provindg 20mm Sand Faced Cement Plaster on Walls upto

height 10.0 M above G.L Consisting of 12mm th. Backing Coat of

ITEM NO.19 301.00 SQM 477.2

1:3 ( 1 Cement : 3 Snad) and 8mm Th. Finishing Coat of C.M. 1:1

( 1 Cement : 1 Sand ) Etc. Comp.

Wall painting (two coats) with antifungus exterior water

proffing plastic emulsion paint Light shade (Ultima or

equivalent) of approved brand and manufacture on exterior wall

ITEM NO.20 surface to give an even shade including applying primer coat as 800.00 SQM 143.2

required by manufacturer of paint and thoroughly brushing the

surface to remove all dirt and loose powdered material

including curing etc complete.

Providing and applying plaster of paris putty of average 2mm

thickness over plastered surface to prepare the surfacec even

and smooth. and Wall painting (two coats) with plastic emulsion

ITEM NO.21 paint of approved brand and manufacture on WALL surface to 1452.00 SQM 315.6

give an even shade including thoroughly brushing the surface

free from mortar dropping and other foreign matter and sand

papered smooth.

Distempering (two coats) with oil bound washable distemper of

an approved brand and manufacture and of required shade on

CEILING/SLOPING ROOF surfaces to give an even shade, over

ITEM NO.22 and including a priming coat with distemper primer of approved 404.00 SQM 139.9

brand and manufacture after thoroughly brushing the surface

free from mortar dropping and other foreign matter and also

including preparing the surface even and smooth.

Dismantling sanitary fittings like wash basin, W.C. pan (Indian

ITEM NO.23 and European type), flushing tank etc. Including stacking the 20.00 EACH 357.9

materials with all lead and lift.

Providing and Laying polished granamite vitrified tiles of size

600*600mm and 10mm Thick of approved make and Colour

ITEM NO.24 having homogenious materials in flooring laid on 20mm Thick. 257.00 SQM 779.1

Average cement Mortar 1:3 (1 Cement : 3 Course sand ) and

pointed with white cement slurry.

Providing and Laying Polished Granamite vitrified tiles of

required size and 8 mm to 10mm thick of approved make and

ITEM NO.25 colour having homogeniouse materials in skirting, dedo etc. on 120.00 SQM 952.2

10mm thick cement plaster 1:3 (1 cement: 3 coarse sand) and

pointed with white cement slurry.

Providing and fixing wash down water closet (European type,

W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand)

ITEM NO.26 9.00 EACH 1816.6

Include seat, and cover for wash down water closer with C.P.

brass hinges and rubber buffers. (B) Black plastic seal and

cover.) (A) vitreous China Pattern :(i) in white colour

Providing and fixing two way bib taps of Jaquar : FLR 5041 N /

Cera / Benelave or equivalent make following size complete as

ITEM NO.27 9.00 EACH 1601

directed by EIC / Architect '(A) Brass screw down bib

taps polished bright (i)15mm

Providing and fixing (Simpolo make) sculpture urinal white

glazed urinal basin with white glazed vitreous china, 15 mm

dia C. P. brass concealed stop cock with heavy quality C. P. brass

inlet connection of required length with brass union, washer

and C. P. brass dome and spreaders with C. P. brass union and

ITEM NO.28 clamps, heavy quality c. p. brass bottle trap and concealed 6.00 EACH 2607

connection 32 mm dia G. I. concealed waste pipe with fittings

upto the floor trap / including constructing channel above

finished floor level with required brick work & P. C. C. work

complete including cutting and making good the walls, RCC

work and floor etc., wherever required complete as directed by

Providing & fixing SYNDICATE table top basin 490 L 490W

180H (Simpolo/Hindware/Cera or equivalent make)with single

ITEM NO.29 hole for pillar trap with C.I or M.S brackets, fisher union, rubber 7.00 EACH 3389

plug painted white including sutting holes and making good the

same including fittings complete as directed by EIC/ Architect

Providing and fixing Ractangular Mirror of Approved quality

ITEM NO.30 and size 450*350 mm with Plastic moulded frame of approved 6.00 EACH 316.7

make and shade with 6mm thick hard board backing.

Providing & fixing hand shower health faucet of a brass body

ITEM NO.31 with wall hook and 1.5 m hose of Jaquar : ALD : 573 / Cera / 4.00 EACH 1247

Benelave or equivalent complete as directed by EIC/ Architect

Providing and Fixing C.P. Brass towel rail complete with C.P.

ITEM NO.32 Brass brackets fixed to wooden plugs with C.P. Brass screws. (B) 2.00 EACH 566.7

600 x 20 mm size

Clearing the land by uprooting rank vegetation, grass, bushes,

ITEM NO.33 shrubs, saplings and trees girth upto 300mm, and disposal upto 391.00 SQM 12.3

1 km. including all labour,tools & plants etc complete.

Removing and refixing avilable Paver block interlocking

cement concrete paver blocks 60mm thick of M40 grade of

approved make and shape including leveling the base with

ITEM NO.34 50mm thick sand bedding, laying the paver blocks in pattern as 260.25 SQM 39

directed by the EIC, filling the joints with sand including

watering, rolling and compacting with appropriate tools and

plants, all conveyance including loading, unloading of blocks

Providing and Laying interlocking cement concrete paver blocks

60mm thick of M40 grade of approved make and shape

including levelling the base with 50mm thick sand bedding,

laying the paver blocks in pattern as directed by the EIC, filling

ITEM NO.35 323.50 SQM 662.8

the joints with sand including watering, rolling and compacting

with appropriate tools and plants, all conveyance including

loading, unloading of blocks etc. complete in all respect.

Mithikhan Or Bhukhra stone (local Soft stone) Masonary in C.M

ITEM NO.36 1:6 ( 1 Cement : 6 Fine Sand) in Super structure Including 10.00 CUM 5874.8

racking the joint Etc. Parapet Wall

Visitor's Chair (Non-Revolving back, height 17") 4 leg fabricated

stand to be made from 40 x 20 x 16 CRC powder coated

sections.Maxwell nylone caster 50 mm dia P.U.handles, Seat to

ITEM NO.37 be made from 50mm thick sleepwell foam. back to be made from 10.00 Nos 2320

38mm thick sleepwell foam. 18mm M.S. pipe sructure alongwith

helical spring and better quality of tepastry.

Medium back chair (revolving back, height 21") 5 leg revolving

fabricated stand to be made from 40 x 20 x 16 CRC powder

coated sections, excell nylone castor - 50 mm dia P.U. handles,

ITEM NO.38 seat to be made from 50mm thick sleep well foam. Back to be 10.00 Nos 4060

made from 38mm thick sleepwell foam. 18mm M.S. pipe

structure alongwith helical spring, better quality of tepastry.

Providing and fixing fully glazed partition using 12mm thk Modi

guard make clear toughened float glass fixed with necessary

patch fittings(Archie/Ozone make), D brackets etc. As per the

manufacturers specification or as directed by the EIC/Architect.

Necessary wooden framing to be erected above false ceiling.

ITEM NO.39 27.93 Sqm 6800

Only visible area to be measured for mode of payment. Item

including of all the taxes, VAT as per the prevalent rules,

materials, transportation,erection of complete item as directed

by EIC/Architect. Service Tax shall be paid separately as per

prevailing rules.

Providing and Fixing chromium plated brass half turn flush cock

ITEM NO.40 of approved quality including fixing in pipe line complete. ( I ) 21.00 EACH 380.4

Providing and Fixing C.P. Brass shower rose with 15 mm or

ITEM NO.41 1.00 EACH 326

mm inlet. ( A ) 100 mm dia.

Providing and Fixing to wall ceiling and floor UPVC (Printed ISI

marked) of the following outside dia . low density complete with

ITEM NO.42 special flange compression type fittings, wall clips etc. Including 50.00 RM 110.3

making good the wall ceiling and loor.

(A) 15 mm dia.

Providing and Fixing to wall ceiling and floor UPVC (Printed ISI

marked) of the following outside dia . low density complete with

ITEM NO.43 special flange compression type fittings, wall clips etc. Including 100.00 RM 140.8

making good the wall ceiling and loor.

(A) 25 mm dia.

Providing and Fixing cast iron (spun) nahni trap of the following

nominal diameter or self cleaning design with CI screwed down

ITEM NO.44 13.00 EACH 965.1

or hinged grating including cost of cutting and making good the

walls and floors 100 mm inlet and 50 mm outlet.

Proiding and Fixing 15 x 15 cm stainless steel grating for gully,

ITEM NO.45 13.00 EACH 31.3

floor or nahni trap

Providing and Fixing to wall ceiling and floor 6.0 kg f/cm2

working pressure polyethylene pipes (Printed ISI marked) of

ITEM NO.46 the following outside dia. Low density complete with special 25.00 RM 387.1

flange ompression type fittings, wall clips etc. Including making

good the wall ceiling and floor. (C) 110 mm dia

Providing & Fixing to wall ceiling and floor galvanized mild steel

tubes (medium grade ISI engraved marked) of the following

ITEM NO.47 66.00 RM 666.6

nominal bore, tube, fittings and clamps including making good

the wall, ceiling and floor. (F) 50 mm

Painting two coats (excluding priming coats) on new steel and

other metal surfaces with synthetic enamel paint, brushing to

ITEM NO.48 60.00 SQM 106.8

give an even shade including cleaning the surfaces of all dirt,

dust and other foreign matter.

Providing and Fixing solid PVC sheet (Approved make) 5mm

ITEM NO.49 thick false ceiling with butt jointing and brass screws (Frame 280.00 SQM 1020.8

work to be paid separately)

Providing and Fixing anodised aluminium work consisting of

tee/ angle sections, of approved make conforming to IS: 733 in

frames of false ceiling including aluminium angle cleats with

necessary brass screws, aluminium perimeter angles fixed to

ITEM NO.50 wall with rawl plugs at about 450mm c/c and fixing the frame 280.00 SQM 506.2

work to level adjusting hangers ( 6mm dia. MS rods or any other

approved material ) with necessary cadmium plated machine

screws, all as per approved drawing and directions of

EIC.(Approximate weight of aluminium tees and angles shall be

Providing Roller blackout blinds with 3 pass eco blackout fabric

100% polyster fabric (plain veneer) with pigment PVA -coating

on both side of fabric wid. Dupont black coatery. Sandwich with

roller 38 m mechanism with endless chain and with installation

ITEM NO.51 54.00 SQM 1795

as per approved Specifications, design and drawings, including

of all the taxes, VAT as per the prevalent rules, materials,

ransportation, erection of complete item as directed by

EIC/Architect. Service Tax shall be paid separately as per

Providing & fixing Hydrolic door closer with necessary

ITEM NO.52 2.00 Each 1056.9

accessories and screws etc. complete includig all cost.

Providing & fixing in position 18 mm thick mirror polised

ITEM NO.53 telephonic black granite slab for urinal partition machine 2.88 SQM 2321

cut,120 cm heightx60 cm deep.

Providing and fixing paneling made from 50x37mm hard wood

frame at 600x600mm c/c distance clad with 12mm th.

comercial ply with 1.00 mm th. laminate.. Complete with all

necessary hard warw & fittings as per approved model,

ITEM NO.54 109.00 SQM 3,077.00

Specifications, design and drawings, including of all the taxes,

VAT as per the prevalent rules, materials, transportation,

erection of complete item as directed by EIC/Architect. Service

Tax shall be paid separately as per prevailing rules.

Providing & Fixing Chajjja corrougated GI sheets roofing fixed

with galvanised iron J or L hooks,bolts and nuts 8 mm diameter

ITEM NO.55 with bitumen and GI Limpet washers, filled with white lead 28.00 Sq.m 838.8

complete excluding the cost of purlins, rafters and trusses.

( I ) 0.80 mm thick sheet

Removing and Refixing Furniture Like, Partition wooden

ITEM NO.56 2.00 Job 35995.96

triellies work and record shifting including frames, with all lead

Providing and Laying CC 1:3:6 (1 cement :3 coarse sand :

crushed stone aggregate 20mm nominal size) and curing

ITEM NO.57 53.00 Cum 5487.3

complete including cost of form work in. (A) Wall caps/

coping/foundation/plinth beams

Steel work welded in built up sections, framed work including

cutting, hoisting fixing in position and applying a priming coat

or red lead paint

ITEM NO.58 6.50 q 11593.3

(A) In beams and joists, channels angles, tees, flats with

connecting plates or angle cleats as in main and cross beams, hip

and jack rafters, purlins connected to common rafters and the

PART - A TOTAL

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Description of Item (with brief specification

Item No Quantity Unit Rate In figures Amount

and reference to book of specifications)

Dismantling old plaster racking out joints and

cleaning the surface to make ready for new

ITEM NO.1 1093.00 sqm 45.9

plastering including disposal of rubbish to the

dumping ground with all lead and lift.

Demolition and Disposal of unserviceable

materials with all lead and lift.

ITEM NO.2 6.24 cum 898.3

( i i ) Unreinforced cement concrete.

Mithikhan Or Bhukhra stone (local Soft stone)

Masonary in C.M 1:6 ( 1 Cement : 6 Fine Sand) in

ITEM NO.3 12.00 CUM 5874.8

Super structure Including racking the joint Etc.

Parapet Wall

20mm sand faced cement plaster on walls upto

height 10 m above GL, consisting of 12 mm thick

ITEM NO.4 backing coat of C.M. 1:3 (1 cement : 3 fine sand) 1093.00 SQM 477.2

and 8 mm thick finishing coat of C.M. 1:1 (1

cement : 1 coarse sand) etc.comp.

Providing and laying broken glass coping in

ITEM NO.5 40mm thick C M (1:3) layer on top of 89.26 sqm 398.5

walls.including curing etc. complete.

Wall painting (two coats) with antifungus exterior

water proffing plastic emulsion paint Light shade

(Ultima or equivalent) of approved brand and

ITEM NO.6 manufacture on exterior wall surface to give an 1561.20 sqm 143.2

even shade including thoroughly brushing the

surface to remove all dirt and loose powdered

material including curing etc complete.

PART -B Total

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Description of Item (with brief specification and reference

Item No Quantity Unit Rate In figures Amount

to book of specifications)

Item-1Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval

from engineer incharge made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with

erection ofsupplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating.(The rates excludes the cost of

Item-2Supplying KITKAT pattern porcelain cut-out fuse with

base of following current capacity erected on existing block

Item-3Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity ICU of

35 KA. at 415 V. having normal current rating 125A. with Fixed

thermal & magnetic release suitable to work on A.C.supply

c/s. with all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

Item-4Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking capacity ICU of

25 KA. at 415 V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release suitable to work

on A.C. supply 50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing 16 G.M.S.

Item-5 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, confirming to IS

13032 and BS 5486-1986 without MCB to house appropriate

5 nos. of MCBs.(The DBs should be used of same company of 2 EACH 3836

MCB to be used)

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

(b) sheet steel double door (iv)12 way

Item- 6Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

6 appropriate nos. of MCBs.(The DBs should be used of same 2 EACH 623

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase

(b) sheet steel double door (IP-43)(i)4 way

Item-7 providing and erecting Miniature circuit breaker single

pole 6A to 25A suitable to operate on 240 V A.C. system and

7 having breaking capacity 10 KA to be erected in existing box. 48 EACH 111

confirming to IS 8828/1996 with ISI Mark

Item-8 Plastic enclosure fitted with DIN rail suitable for

incorporating Three /Four nos. MCB.

Item NO-9 Providing & erecting 240 V MCB double pole switch

for lighting Load (B Curve) having 10 KA breaking capacity &

9 confirms to IS : 8828 in existing box having following capacity 10 EACH 293

(B) 40 Amp.cat III

Item- 10 Approved make Iron Clad or metal clad four pole

change over switch 415V. confirming to IS of following

(B) 32A cat II

Item- 11 Providing and erecting Approved make ELCBs /

RCCBs conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 6 KA and suitable for

operation on single phase 240 V. having characteristic of quick

11 action & tripping with all advance feature & do not incorporate 2 EACH 1950

any electronic component.for following Max. rating erected as

(i) 25 Amps.DP Cat-III

Item- 12 Supplying & erecting 20 Amp 10 KA ‘C Curve’

single pole MCB with 20 Amp. Plug socket, company fabricated

12 powder coated sheet steel enclosure erected as directed with 8 EACH 654

connection.

[B] 15 Amp. / 5 Amp. Five pin Universal Socket Cat-III

Item-13 Providing and erecting Approved make ELCBs /

RCCBs conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 6 KA and suitable for

operation on 3 phase and neutral 415V. having characteristic

13 of quick action & tripping with all advance feature & do not 2 EACH 2611

incorporate any electronic component for following Max.

rating erected as directed.

(ii) 40Amps. FP Cat-III

Item- 14 Supplying rubber matting of following thickness as

per IS:15652/IEC

Item- 15 Supplying & erecting ABC powder type 'Ceasefire'

15 type Fire extinguisher as per IS 13849 or 1 Kg capacity with 4 EACH 840

necessary clamp for erection on wall

Item- 16 Providing and erecting metallic vitrified danger notice

board for HIGH VOLTAGE installation to be erected as per

Item- 17Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing trench /

pipe at road crossing or floor of following size of cables.

(B) 4 core 16 Sq. mm

Item- 18Supplying & erecting XLPE(IS:7098)(I)-88 ISI

unarmoured copper cable 1.1 KV grade to be erected as

18 directed of following size. 30 Mtr 361

(L) 4 core 6 Sq. mm

Item- 19Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction

Item- 20Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate

20 modules erected with necessary connections as per site 20 EACH 159

situation directed by Engineer In charge.

(8) Computer RJ-45 socket CAT-III.

Item- 21 Point wiring for Light / Bell with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in

following type of pipe to be erected concealed in/ on surface

on wall/ceiling complete with 6A Modular type switch / bell

push & accessories and earth continuity of following type,

erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.(c) with oval

conduit /PVC casing capping double lock type erected flushed

on wall/ceiling complete Cat. III

Item-21-A For point wiring in bathroom and W/C and

21-A washbasin area in residential quarters reduce overall rate by 18 pt 186

50% of point wiring for light.

Item-22Point wiring for secondary light point with 2-1.5

sq.mm & earthwire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in /

flushed on wall/ceiling, complete with earth continuity and

22 necessary connection with primary light with accessories 6 pt 110

erected on Metal / PVC box covered with 3 mm thick

PC(Polycarbonet) / Acrylic sheet for open / concealed wiring.

with necessary Lamp holder / ceiling rose / H.D.Connector as

directed.(c) with oval conduit /PVC casing capping double lock

type erected flushed on wall/ceiling complete

Item- 23 Point wiring for Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic box, single

23 mounting base frame covered with textured / metallic front 31 pt 255

plate modules erected on / in wall / ceiling with following

type accssories Cat. III

Item- 24Point wiring for FAN with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in / flushed on wall/celing

complete with 6A Modular type switch and hum free EME four

or more step type electronic fan regulator with separately

24 mounted and accessories with earth continuity of following 22 pt 590

type erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected on

/ in wall / ceiling as per pipe erected.with necessary ceiling

rose / H.D.Connector as directed.(c) with oval conduit /PVC

casing capping double lock type erected flushed on

wall/ceiling complete CAT-III

Item- 25Point wiring for Individual Plug with & earthwire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires, in existing pipe duly

erected complete with Modular type switch & 5 pin Plug

25 erected on PVC / Metallic box covered with appropriate front 26 pt 767

plate modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.[III] For 16A Plug with 2-4

sq.mm Cu. Wire(c) with oval conduit /PVC casing capping

double lock type erected flushed on wall/ceiling complete

Item- 26 Providing & erecting Switch board for Computer or

electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open box

with single mounting base frame covered with

textured/metallic /white front plate,modules erected with

26 necessary connections as directed 17 pt 1122

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

[B] For Modular Type Accessories CAT-III

Item- 27Providing following type of Modular Type Accessories

27 mounted with pvc / metallic box, single mounting base frame 25 NO 25

covered with textured / metallic front plate , modules erected

with necessary connection. As desired by Engineer In charge

Item- 28Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of

pipe to be erected concealed in /flushed with wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following

size(C) With oval conduit /PVC casing capping double lock

(b) 2 wire 2.5 sq. mm

Item- 29Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in existing pipe

erected with 2.5 sq. mm copper conductor FRLS PVC insulated

29 stranded wire of green colour for earth continuity of following 180 Mtr 95

size(C) with oval conduit /PVC casing capping double lock type

(a) 2 wire 4 sq. mm

Item- 30 Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction boxes

30 fixed with adhesive solution & Clamps with following dia of 200 Mtr 33

pipes, in approved manner as directed

30-A Item- 30-A(d) 40 mm 25 Mtr 67

Item- 31Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast powder

coated and high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor more than

31 CCT 3000 K to 6500K, 60 EACH 370

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.)(A) Tube Light with integral driver

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-III

Item- 32Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.9, THD < 15 %,

32 CCT 3000 K to 6500K, 30 EACH 751

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.)(A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring

loaded mounting clips complete.IP20

(iv) 22-24 watts, Surge-2 KV Cat-III

Item- 33 Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.9, THD < 15 %,

33 CCT 3000 K to 6500K, 12 EACH 1087

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.)

(I) Adjustable spot light with COB led having aluminium

reflector of following wattage

(iii) 15 Watts CAT-III

Item- 34 Supplying and erecting led lamps with following

wattage capacity of 220 to 240 voltage, minimum

burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 /

E27 / B22 lamp holders, pf >= 0.5. (A) LED Lamps integral

type, with PC diffuser suitable LAMP holder (iii) 10 to

Item:-35 Providing & Erecting following Shockproof tissino

35 type accessories erected on 3 mm thick PC (Polycarbonate) 22 EACH 18

sheet in PVC/ Metal Box. erected on wall/ ceiling.(7) Bakelite

Item- 36 Providing & erecting Approved make Power Saving

50 Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy & 30 cms.

down rod erected with 24/ 0.2, 3 core flexible wire with

earthing.(Havells, Orient, Crompton, Anchor, Bajaj,Usha)

Item- 37 Providing following type of Modular Type Accessories

mounted with pvc / metallic box, single mounting base frame

37 covered with textured / metallic front plate , modules erected 22 EACH 395

with necessary connection. As desired by Engineer In

charge(5) Electronic hum Free four or more steps EME Fan

Item- 38 Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly painted for fan

complete with necessary 24/ O.20, 3 core flexible wire with

Item- 39 Supplying & erecting approved make low noise

decorative exhaust fan having square frame ABS body with

39 inbuilt lowers & square frame. 8 EACH 1687

200mm with 1350RPM Cat.II

Item- 40 Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts etc.

40 complete of following sizes. 50 Mtr 21

Item- 41 Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper wires of

41 following size to be erected as directed. 50 Mtr 46

(e) 1.50 Sq.mm 3 core round PVC sheathed

Item- 42 Supplying and erecting Flexible PVC insulated multi

strand multi core 1.1 kv grade ISI marked copper wires of

42 following size to be erected as directed. 50 Mtr 77

(h) 2.50 Sq.mm 3 core round PVC sheathed

Item- 43 providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(C) with oval conduit /PVC casing capping double lock type

(b) 2 wire 6 sq. mm

Item- 44 Supplying & erecting in earthpit of minimum bore dia.

225mm size ASH or approved make Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987 made

of corrosion free G.I.Pipes having Outer pipe dia of 80 mm

having 80-200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection terminal dia of

14 mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for

following type of applications.[A] For electrical installation up

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

Item- 45 Providing one bag of 25 Kg. Additional Back Filling

Compound (BFC) suitable for safe earthing device

Item- 46 Supplying & erecting XLPE(IS:7098) (I)-88 ISI

46 unarmoured Aluminium cable 1.1 KV.grade to be erected as 150 Mtr 108

directed of following size.(C) 4 core 10 Sq. mm

Item- 47 Solder less crimping type Aluminium lugs conforming

to IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner.

47-A Item- 47-A (B) 10 Sq.mm 10 EACH 13

Item- 48 Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than

lm/w and corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and heat sink

extruded aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than

48 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio 8 EACH 6501

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

(A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage

protection. (iv) Above 90 to 120 watts Cat-III

Item- 49 Providing street light pole bracket comprising main

Light Class MS tube of 4.2 cms. outside dia. complete with

suitable M.S. sleeve tubing of approx. 45cms.length and

suitable for 76.5mm. /80 mm or require size pole top having

sufficient fastners for fixing the brackets and having suitable

rise as per site condition as directed and spread of 2 mtr.with

suitable welded stiffener reducer and with lock nut complete

painted with onecoat of Red oxide / PU base primerand two

coats of Aluminium / PU paint. Suitable for side entry fitting

brackets of following nos of arms.[a] Single Arm bracket 2 Mtr

Item- 50 Supplying & erecting approved make SMC press

moulded composite FRP. loop-in, loop-out approx. 2mm thick

box complete with bakelite connector strip 4way & hinged

doors having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box.(B) 250X200X100

Item- 51 Supplying & erecting approved make Digital time

switch having lithium cell 6 years operative and operate

battery backup 1 channel day clock with 14 memory

programme, suitable to operate on 240V + 5%, 16A with,

floating contacts Minimum switching setup time 1 minimum &

LCD display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with

Item- 52 Supplying & erecting power contactor for time switch

complete erected as per direction

[D] 4 pole 440V 40 Amp. Cat III .

Item- 53 Providing and erecting AC-3 duty 3 pole power

contactors spare kits (L & T, C&S, BCH,T.C. Siemens, make).

(b) for 40 A rating

Item- 54 Making trench in Hard murum / Tar Road of suitable

width of 90 cms or required depth for laying cable or locating

the fault all over the run and back filling the same and making

the surface as normal ground.

Item- 54-AIf additional machineries like hammer driller or JCB

Item- 55 Supplying following size of Light duty “A” Class G.I .

Pipe & erecting as directed by Engineer-in-charge.(B) 50 mm

Item- 56 Providing & laying. Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with

necessary connecting accessories of same material at required

depth for laying of cable. below ground / road surface for

enclosing cable and back filling the same to make ground as

per original.(A)50 mm dia

Item-57 Providing & erecting open well type horizontal mono

block pump set with stainless steel body having following

specification

57 (C) 1 H.P. single phase open well motor pump set suitable for 1 EACH 9518

185 LPM discharge @ 25 mtr. head, suitable for 32 mm dia.

Delivery pipe with control panel. Cat-III

Item- 58 Supplying and erecting Direct - On - Line Starter with

18 A. rating contactor and with 3.5 Amp. 18A range directly

58 operated in totally insulated elegant enclosure for single phase 1 EACH 2080

operation up to 3 HP as per IS 13947 complete erected on P.W.

Block with necessary connection. Cat-III

Item- 59 Providing and erecting water cooler having storage

capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an

ambient temp of 45˚ C. The outlet temp. of the water should

drop by 15˚ C within a hour, The water cooler should be

comprising of hermetically sealed compressor, fan motor,

condensing unit, water tank surrounded by evaporating coil,

thermostats, relay etc. complete with necessary inlet & outlet

connection. The body of water cooler will be made from

Item- 60 Supplying & erecting 5 stage single reverse osmosis

water purification system with M.S. powder coated frame,

prefilter housing with 'O' ring presediment filter GAC filter,

60 carbon filter suitable buster DC pump capacity 80 psi, mention 1 EACH 15466

with 40 psi inline typepost carbon filterauto low & high

pressure switches with following size of storage tank & LPH

capacity & erected as directed[B] 25 Ltr / Hr with 30 Ltr. S.S.

Item- 61 Providing & Erecting new water level Sensor for

Ltr. R.O. System

Item- 62 Providing and erecting approved make split air-

conditioning unit consisting of copper condensing unit with fan

motor, hermetically sealed rotary compressor with accessories

etc. duly connected separately erected evaporating unit and

blower motor with its accessories by means of extra supplied

62 proper insulated copper tubing,drain PVC pipes suitable for ( 1 EACH 58706

cost includes powder coated Stand, Eco Friendly green gas

charging, 15A plug top & Remote Control) with necessary core

(2)For ISEER Range (KWH/KWH)(4.0 to 4.49)

(c) for 2 ton capacity

Item- 63 Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

63 base frame covered with textured / metallic/white front plate , 1 EACH 493

modules erected with necessary connections as per site

situation directed by Engineer In charge.

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit

64 Item- 64 PGVCl Load extension charge ((Rate LumpSump 1 Job 50000

Item- 65 Supplying and laying UPVC cable trunking system

comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with

65 necessary end caps Internal and external bend, flat bends, 100 Mtr 275

coupler, tee etc..All necessary accessories and measuring of

following sizes.

(1) 75 mm x 50 mm trunking

TotaL Part-C

PART-A

PART-B

PART-C

I/We am/are willing to carry out the work at… …..% above/below percent(Should be written in figures and words) of the estimated rate mentioned

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

Recovery sheet

Quantity Item Description Rate Per Amount

579.20 Recovery of Steel 33.39 kg

As per item no 5 take 40% of qty

Rate is Considered From MSTC Bulletin)

Total Rs.

Add 18% GST

Add 1 % TCS

Total Rs.

An fix amount of Rs.23,014/- shall be considered as recovery of material obtained from the dismantling of existing structure and shall be recovered/

deducted from 1st R.A bill or shall be deposited in the GMB NON PLD account by the agency as detailed below.

ACCOUNT NAME GMB NON PLD

BANK State Bank of India, Gandhinagar

Branch GMB Complex, Gandhinagar

Account No