Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.2 LAccepted-AOC V P O KOTLA KALAN TEHSIL DISTT UNA H P | UNA | HIMACHAL PRADESH | 174301 | L1 | Accepted-AOC AOC | |
| 2 | L2₹12.6 L+₹40,878.18 (3.35%)Rejected-Finance | L2 | Rejected-Finance Second lowest bidder | |
| 3 | L3₹12.7 L+₹51,469.63 (4.22%)Rejected-Finance RAMNAGAR JAMMU AND KASHMIR | RAMNAGAR | UDHAMPUR | JAMMU AND KASHMIR | L3 | Rejected-Finance Third lowest bidder | |
| 4 | L4₹13.0 L+₹84,878.33 (6.96%)Rejected-Finance GHUMARWIN DIVISION HP PWD GHUMARWIN | L4 | Rejected-Finance Fourth lowest bidder | |
| 5 | L5₹13.3 L+₹1.1 L (8.83%)Rejected-Finance | L5 | Rejected-Finance Fifth lowest bidder |
Tender Value
₹11.0 L
EMD Value
₹22,000
Closing Date
13 Jun 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
HPSIDC Shimla
Construction of rain shelter cum bus stop at Ind. Area Sansarpur Terrace Distt. Kangra (HP).
2022_SIDC_61403_1
job No. 15
Open Tender
Civil Works
Item Rate
90 days
Sansarpur Terrace
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,200
₹22,000
22 Sept 2022
4 Jun 2022
15 Jun 2022
4 Jun 2022
13 Jun 2022
4 Jun 2022
120 days
Amount
Excavation in foundation trenches etc.in earth work in all kind of soil lift upto 1.50mtr.stacking the excavated soil not more than 3 mtrs.clear the edge of excavation and then returning the stacked soil in 15cm consolidating each deposited layer by ramming,watering and then disposing of all surplus excavated earth as directed in all leads all leads and lifts.
Excavation in earth work and filling in 15 cm layers including watering,ramming,consolidating and dressing complete.
Filling in plinth with sand under floors including watering,ramming,consolidating and dressing complete.
Providing and laying cement concrete 1:4:8(1cement:4sand: 8graded stome aggregate 25mm nominal size) and curing complete excluding cost of form work in foundation and plinth.
Providing form work with steel plates 3.15mm thick welded with angles iron in frame 30x30x5mm so as to give a fair finish including centring,shuttering strutting and propping etc. wooden batten and ballies height of propping and centring below supporting floor two ceiling not exceeding 4mtrs.and removal on the same in :- (a) Foundation footings,bases of columns etc.and mass
Providing and laying cement concrete work 1:1.5:3(1cement: 1.5sand:3graded stone agg.20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in- (a) Foundation footing ,bases of columns and the like mass concrete.
Providing tor steel reinforcement for RCC work including bending binding and placing in position in all heights. Sail Make.
15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rouded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4(1cement:4sand).
Providing plinth protectin 50mm thick in cement concrete 1:3:6(1cement:3sand:6graded stone aggregate 20mm nominal size)including finishing the top surface of concrete smooth .Under layer for plinth protection of 75mm thick (un-consolidated)bed of dry brick/stone aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including prepaaation of ground.
Steel work welded in built up sections,trusses and framed work including cutting,hoistingm,fixing in position and applying a priming coat of read lead paint in:- (a)In beams joists channels,angles,tees,flats with connection plates or angle cleats as in main and cross beams,hip,jack raffers,purlins connected to common rafters and the like.
Steel work welded in built up sections,(Anar kali type jali) work including cutting,hoistingm,fixing in position and applying a priming coat of read lead paint in:- (a) In gratings framed guard bars,ladders,railing brackets and similar works.
Providing and fixing M.S. BP sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting fixing and welding to steel roof members and applying coat of red lead primer complete as per the incstruction of Engineer-in charge(Base member of steel work shall be measured and paid sepereatly).
Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20microns over 5 mocrones primer coating i/c fixing with prepainted iron J or L hooks bolts and nuts 6 mm dia meter with prepainted limpet and rubber washers complete with all accessories as required asper the direction of Engineer- in- charge.(Kaprail type)
Providing and fixing ridge or hips 60 cm over all with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20microns over 5 mocrones primer coating i/c fixing with prepainted iron J or L hooks bolts and nuts 6 mm dia meter with prepainted limpet and rubber washers complete with all accessories as required asper the direction of Engineer- in- charge.
Kota stone slab flooring size (60x60cm) 20mm (average) thick base of cement mortar 1:4(1cement:4sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab,including rubbing and polishing complete 25mm thick.
Providing and laying granite stone in flooring 20mm (average)thickness base of cement mortor 1:3(1 cement 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete.20mm thick.
Providing and laying interlocking concrete pavement having thickness 80mm as per drawing and tech.specification clause 1504.
Providing and fixing 9mm thick ply borad ceiling (water proof) for resistant size 610x610x6mm approved quality with but joited and stainless screws( frame work and cover fillet to be measured and paid sperately.
Painting two coats(excluding priming coat)on steel and other metal surfaces with enamel paint,brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter.Enamel paint other than white.(Nerolac/Asian paint)
Mehar Singh
Rajesh Kumar Govt Contractor
Arvind Kumar
Sourav Sharma
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .