Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹68.0 LAccepted-AOC | ₹68.0 L | 1 | Accepted-AOC most Responsive . |
| 2 | 2₹68.3 L+₹26,103 (0.38%)Rejected-Finance | ₹68.3 L+₹26,103 (0.38%) | 2 | Rejected-Finance Not Most Responsive L2 |
| 3 | 3₹68.8 L+₹79,739 (1.17%)Rejected-Finance | ₹68.8 L+₹79,739 (1.17%) | 3 | Rejected-Finance Not Most Responsive L3 |
| 4 | 4₹70.3 L+₹2.3 L (3.39%)Rejected-Finance | ₹70.3 L+₹2.3 L (3.39%) | 4 | Rejected-Finance Not Most Responsive L4 |
| 5 | 5₹72.6 L+₹4.6 L (6.70%)Rejected-Finance | ₹72.6 L+₹4.6 L (6.70%) | 5 | Rejected-Finance Not Most Responsive L5 |
Tender Value
₹73.1 L
Closing Date
3 Sept 2024, 2:00 pmClosed
President, Sewarth FPC
C/O T R Deshmukh At Po Tah Deori ward No 15 Dist Gondia
Construction of poultry farm shed and Building Construction 992.10 Sqm At Bhagi Po Dawaki Tal Deori Dist Gondia
2024_DOAWB_1067997_1
SMART/SEWARTH/WORKS/26/2024
Open Tender
Civil Works
Item Rate
365 days
At Bhagi Po Dawaki Tal Deori Dist Gondia
Please refer tender Document
3 documents required · 3 mandatory
₹1,000
Exempted
DIU SMART Gondia
11 Oct 2024
14 Aug 2024
4 Sept 2024
14 Aug 2024
3 Sept 2024
14 Aug 2024
14 Aug 2024 - 20 Aug 2024
21 Aug 2024
Amount
Constuction of poultry shed and building 992.10 Sqm
Excavation for foundation in earth, soil of all types, sand gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering preparing the bed for the foundation and necessary back filing, ramming, watering including shoring and strutting etc complete (Lift uplo 1.5 m)
Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming. watering etc. complete
Filing in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc complete
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc complete. With natural sand/V SI quality Artificial Sand
Providing and laying in situ/Ready Mix cement concrete M 20 of trap/graniite /quartzile gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc including balling out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V S. I quality Artificial Sand
Providing and laying Castin nitu/Reaily Mix cement concrete M-20 of trap/ granite /quartzite gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, form work, cover blocks, laying pumping compaction finishing the formed surfaces. with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface ar roughening if special finish is to be provided and curing ete complete (Espluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete 8atch mix plant (Pan mixer) etc complete. With natural sand/V.SI quality Artificial Sand
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite /quartzite/ gneiss matal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and cuning etc. complete (Excluding reinforcement and structural steel) with tuby automatic micro processor based PLC with SCADA enabled reversible Drum Type micer/ concrete Batch mix plant (Pan moxer) etc complete With natural sand/V.SI. quality Artificial Sand
Providing and foong in position TMT-FE-500 bar reinforcement of various diameters for RCC pile caps footings, foundations, stats, beams columns, canopies staircase newels chajjas, litels pardis, copings, fins, wiches Jete an per detailed designs, drawings and schedules including cutting bending, hooking the tiers, biriding with wires or tack welding and supporting as required complete
Providing second class Burnt Brick masonry with conventional/ S type bricks in cement mortar 1:6 in foundations and plinth of inner walls in plinth edernal walls including bailing out water manually, striking joints on unexposed faces, raking out joints an exposed faces and watering etc. Complete
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete
Providing internal cement plaster 12mm thick in single coat. cement mortar 1:5 without neeru finish to concrete or brick surtaces, in all positions including scaffolding and curing etc.
Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete
Providing and fixing crimped with G.I. mesh and size 20mmx20mm 10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing the frame in its original position and oil painting etc. complete (excluding cost of structural steel)
Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary,cleaning and preparing the surface, watering for two days etc. complete.
Providing and lying cement concrete flooring 40mm thick with M15cement concrete laid to proper level and slope in alternate bays including com
Providing and fixing mild steel grill work for windows, ventilators etc. 20kg/Sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrsive paint and two coats of all painting complete.
(B) - Structural steel work Providing structural steel work in trusses, other similar trussed purlins and members with all tracing gusset plates eto, as per detailed designs and drawings or as drected including cutting, fabricating, hoisting, erecting fixing in position, Making siveted bolted/welded connection and one cont of anticorrosive paint and over 2 costs of oil painting approved quality and thade etc complete
Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anti corrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
Providing and fixing colour coated Zincalume (R) AZ150 ( min 150 gms/sq.mt total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 045 mm Base Metal Thickness (BMT) (0.5 mm TCT), H strength steel with min 550 MPa yield strength, metalic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43 4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface Profile sheet shall have nom 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib
Roof Accessories Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge-
(C) - ROYALTY METAL 40 MM & ABOVE
MURUM
(D) - MATERIAL LAB TESTING Cement - Fineness, Standard Consistency, Setting Time (Initial & Final), Compressive strength, Soundness
Sand - Fineness Modules and Silt & Clay Content
Concrete M-20 grade - Concrete cube compressive strength (Set of 3 Cubes)
Crushed metal - Water absorption, Specific gravity, Impact value, Crushing value
Brick - Crushing value, Water absorption , & Specific Gravity
Steel - Tensile strength ,Yield stress, ultimate tensile stress, % elongation , weight per running meter ,Bend/ Rebend test.(Set of 3 Bars)
Murum - Liquid limit & plastic limit
(E)Management & Implementation Plan (MSIP), Manage Environmental and Social Health and Safety Risk and EHSS Code of Conduct
.Prviding and managing 20 Trees in the same premises, under Management Strategies And Implementation Plan ( MSIP ) to Manage Environmental , Social , Health And Safety.
Somesh Onkarsingh Upwanshi
SATISH SUNDARLAL KATRE
Shaikh Altaf Mubarak
PARSHVENDRA PARDHI CONTRACTOR
MAYUR CONSTRUCTION
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .