Various Thodu Deposit Construction of Sluice and Shutter arrangements to prevent salt water intrusion from Kayamkulam Kayal to Thoppil Kizhakkepuram thodu in Devikulangara Panchayath of Kayamkulam LAC

Amount

Regulator

60.1.2:RING BUND Type II Putting up ring bund with earth fille gunny bags of top width 1.0m bottom width 2.0m height 2.0 m side and filling in between with earth to form ring bund and maintaining the same leak proof till the completion of the work and clearing the site by dismantling the bund after completion of the work.etc.complete.

60.2.2:Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

60.2.7:BAILING OUT WATER BY ENGAGING COOLIE - Bailing out water by engaging coolie where ever necessary where pumping with engine and pump set not possible

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

60.64.1:Coconut Pile - Supplying and stacking well matured straight coconut post for driving down throug various strata bellow bed level including cost coveyance labour charges etc complete.

OD18875/2024-2025:Coconut Pile - Driving down coconut pile to lines and levels through variuos strata including all hire charges and labour for fixing , staging platform and all other appliances necessary for pile driving down after pointing the bottom end

60.7.2:DR PACKING Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts

5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD18877/2024-2025:Supplying and fixing M S Channel for the groveof shutter to the concrete piller at the time of construction using good quality M S Channelof size 100mmx50mm and required length including all cost labour etc complete as per the direction of departmental officers in the site

OD18879/2024-2025:Fabricating supplying and erecting screw gear shutter of size 2.3 x 1.55 x.075 m with good quality second class teak wood and framed with M S angles and flats 10mm thick duly welded together as channel and provided bracing includingdrilling holes (58Nos) and riveting with M S rivets. Screw gear shaft 63 mm dia M S round bar with 300cm threading to get 100 threads from 50cm. Using 10mm thick M S base plate and 100mm thick brass nut with 63 mm thread for lifting arrangements and painting with anti corrosive bitumen black paint including all cost of materials labour charge for cutting welding ,lath works etc. complete as per direction of departmental officers in charge

OD18884/2024-2025:Trials run the shutter including greasing, lubricating including cost of all materials, conveyance, labour etc. complete

OD28580/2024-2025:Fabricating and fitting GI Pipe Ladder with 2No of vertical post of 40mm GI pipe with 3.50m length and 15No horizontal bars of 25mm GI Pipe with 0.5m length each provided hand rail fittings with cost of materials, conveyance etc. complete

Ashokkumar.k (BID ID -2093430)

Bidder Name

Ashokkumar.k

RAJENDRAN THAMPI S