REPAIR AND MAINT TO CERTAIN MISCELLANEOUS B/R WORKS AND REPAIR TO JOINT FILLING TARMAC PAINTING AT COMN FLT AT AHMEDABAD

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) size n. exc 1.5 sqm each

Taking down chowkats or frames with shutters (without taking off shutters from frames) size exc 1.5 Sqm & n.exc 4.00 sqm each.

Taking down Shutters of any description exc 1 sq.m and n.exc 2 sqm each each.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises.

Taking up or down 15mm bore steel tubing and connections complete all as specified

Taking up or down 20mm bore steel tubing and connections complete all as specified

Dismantling water tanks exc 250 but n.exc 500 Litres capacity.

Dismantling water tanks exc 500 but n.exc 1000 Litres capacity.1000 Litres capacity.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar.

Demolition of stone slabs and tiles of any description, laid bedded and pointed in any mortar.

Demolition of Cement concrete (unreinforced)Concrete of any description and in any position not otherwise specifically provided for

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling of Plain, Corrugated, Semi corrugated,steel, fibre sheets in roof coverings complete all as specified

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete

Demolition and breaking up salt glazed stone ware drain pipe150mm dia including packing under hunching against the sides and PCC bed complete all as specified

Demolition and breaking up salt glazed stone ware drain pipe200mm dia including packing under hunching against the sides and PCC bed complete all as specified

Demolition and breaking up cast iron drain pipe 100mm dia including packing under hunching against the sides and PCC bed complete all as specified

Demolition and breaking up cast iron drain pipe 150mm dia including packing under hunching against the sides and PCC bed complete all as specified

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying/taking out of cables,CI/GI pipe lines and getting out in sooft/loose soil all as specified and directed.

Returning, filling in soft/loose soil including spreading leveling, watering and well ramming in layers not exceeding 25cm thick complete.

Removing excavated material to the distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified

M&L Sand filling under floor or in foundation including watering and consolidation complete all as specified

M&L ATT along the external/internal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron all as specified

M&L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified

M&L At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified

M&L PCC 1:3:6 Type C-1 using 20 mm graded stone aggregate as in coping or benching of manhole etc including necessary formworks complete.

M&L Pre-cast cement concrete , Type B1, 1:2:4 (using 20mm graded crushed stone aggregate) exc.10 cm in width as in kerb stone , setting in mortar 1:6,complete all as specified

M&L Pre cast RCC 1:2:4 Type B1 using 20 mm graded stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls and set in cement mortar 1:4 including necessary form work complete as in repairs all as specified and as directed by Engr in charge.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed

M&L Brick work with fly ash bricks (modular size bricks) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified

S&F 30mm thick flush door shutter, solid core construction with block board core and ply wood face panels, commercial type on both faces.

M&L 1st class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. and removing complete as in repairs all as specified

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

All as above item No 31 but wire gauzed ie panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on additional square 8mm MS solid tube and this tube shall be welded to MS tube and the wire gauge shall be stretched to tighten firmly

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube complete all as specified.

M&L PVC sheet wall lining of thickness 5mm consisting of panels of desired size stuck on the inner frame work of 50mm wide strips of 5mm thick prelam UPVC(Rigid) sheet. The panel and strips shall be of 600Kg/Cbm density manufactured by an ISO-9000 certified company. The strips should have in their centre a groove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10" between two UPVC(Rigid) strips. The UPVC(Rigid) strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of panel and correspondingly of the grid may vary depending on the size of the wall.

M&L 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section all as specified

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section all as specified

S&F Aluminium alloy, anodised, sliding door bolt 200mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloycomplete all as specified

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F 100mm butt hinges , medium weight cold rolled mild steel complete all as specified

S&F 100mm size MS mortice lock vertical type 4 lever complete as in repairs all as specified

S&F Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete all as specified

S&F Aluminium handles 125mm size, cast type, anodised complete all as,specified

S&F Aluminium handles 150mm size, cast type, anodised complete all as,specified

S&F 20mm dia curtain rod anodized aluminium alloy including fancy type brackets complete as in repairs all as specified

S&F Floor door stopper 150mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete as in repairs all aspecified

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete as in repairs all as specified

S&F 20mm dia stainless steel curtain rod including fancy type brackets for doors and windows complete as in repairs all as specified

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

S&F Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters , running rails and guides for sliding doors, fixed with angle cleats or other connecting plates GDE Fe410-W(Gde E-250) quality A

M&L Steel window with side hung shutter including projecting type hinges with steel handle , and steel peg stay complete with glazing bar dovetailed or welded but without glazing bars complete all as specified

S&F Powder coated aluminium door, windows and ventilators and and partition wall with one or more rebates fixed in position as per manufacturer's instruction including necessary joining cleat, glazing clips, rubber packing, beading etc complete all as specified

S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugation side lap , fixed with coach screws, in roof coverning , walls etc with grade of zinc coating 275 complete all as specified and directed.

S&F Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified

M&L False ceiling work with approved ceiling board of size 600x600mm prime fine fissured micro look any colour fixed in snap grid frame work of powder coated aluminum sections . wall angle of size 25x25x0.35mm , Main and cross T- section (Bottom pre coated) of size 24x38x0.70mm, holding clips and GI 6mm dia hangers (upto 1200 length) for grid size 600x600mm false ceiling adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete.

M&L Granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L 20-25mm thick machine cut & polished kota stone slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L 75mm thick PCC 1:4:8 Type D2 using 40mm graded stone aggregate as in floor finishes and paving complete all as specified

M&L 75mm thick PCC 1:2:4 Type B1 using 20mm graded stone aggregate as in floor finishes and paving complete all as specified

M&L Glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L Non - Skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors etc.complete all as specified

M&L Non - Skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors etc.complete all as specified.

M&L Virified Ceramic tiles dark shade10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor complete all as specified

M&L Virified Ceramic tiles dark shade10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surfaces/skirting complete all as specified

M&L Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigments conforming to IS 15658-2006 of 60mm thickness M-35 gde complete all as specified and directed

M&L Polished chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over 15mm thick screed in CM(1:6)

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls all as specified and directed

M&L Rendering 10mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces of walls finished even and smooth with out using extra cement complete all as specified

M & L Rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement work complete all as specified.

M&L Rendering 15 mm thick in cement mortar 1:4 on brick wall/ stone masonary wall surface finished even and smooth without using extra cement.

M&L 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes all as specified and directed.

M&L Preparation of old surfaces of walls and applying one coat of oil emulsion distemper complete all as specified.

M&L Complete removal of existing treatment of wall and applying two coat of oil emulsion distemper complete all as specified.

M&L Complete removal of existing treatment of ceiling and applying two coat of oil emulsion distemper complete all as specified.

M&L Preparation of new surfaces of walls and applying two coats of oil emulsion distemper over a coat of chalk whiting complete all as specified.

M&L Preparation of old surfaces of ceiling and applying one coat of white wash all as specified.

M&L Preparation of old surfaces of walls and applying one coat of white wash all as specified.

M&L Preparation of old surfaces of walls and applying one coat of cement based paint all as specified.

M&L Preparation of old plastered / unplastered surfaces of walls and applying two coats of acrylic emulsion weather proof paint complete all as specified.

M&L Preparation of old surfaces of walls and applying one coat white putty

M&L Preparation of old surfaces of ceiling and applying one coat white putty

S&F 4mm thick sheet glass oridinary quality and glazing with oil putty complete including hacking out old broken glass (any thickness, size, quality or description) from steel frames and all as specified as directed

S&F 4mm thick sheet glass ordinary quality alongwith EPDM rubber all around glass edges in square n.exc 0.5 Sqm in each pane.

S&F 5mm thick sheet glass ordinary quality alongwith EPDM rubber all around glass edges exc 0.5 Sqm in each pane complete all as specified

S&F Solar control film 50 micron thick reflective type, sticked to glass pane as per manufacturer's instructions as specified.

M&L Preparation of old painted surface of wood of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint all as specified and as directed.

M&L Preparation of old painted surface of wood of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L Preparation of new wood surfaces of any description over 10 cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L Preparation of old painted surface of steel of any description over 10 cm in width or girth not otherwise described and applying two coats of sybthetic enamel paint all as specified and as directed.

M&L Preparation of old painted surface of steel of any description over 10 cm in width or girth not otherwise described and applying one coat of sybthetic enamel paint all as specified and as directed

S&F 15mm dia tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors,

S&F 20mm dia tubes medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors,

Refixing 15mm bore old steel tubing & connections in new or old position ie. walls, ceiling, floors, etc.complete all as specified

Refixing 20mm bore old steel tubing & connections in new or old position ie. walls, ceiling, floors, etc.complete all as specified

S&F 15mm bore unplasticised PVC pipes of pressure rating 10kgf/cm² with all fittings and fixed complete to walls and ceiling or laid in floors all as specified

S&F Low density polyethelene pipe(LDPE) 32mm dia of pressure rating 6Kg/cm2 fixed in position for WHB and urinal complete all as specified

S&F 20mm bore unplasticised PVC pipes of pressure rating 10kgf/cm² with all fittings and fixed complete to walls and ceiling or laid in floors all as specified

M&L Disconnecting existing tanks exc 250 and n. exc 500 ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

M&L Disconnecting existing tanks exc 500 and n. exc 1000 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

M&L Disconnecting existing tanks exc 1000 and n. exc 2000 ltr (including UG sumps) , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified. Note :- Bleeching powder to be spread in the bottom of tank before fixing / installing in position.

S&F Rotational moulded water storage tank 500 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as directed.

S&F Rotational moulded water storage tank 1000 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as directed.

S & F 15mm bore bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or forbrass ferrule and fixed complete as in repairs all as specified

S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe complete as in repair all as specified.

S&F Stop valves, cast copper alloy,screwed down,high pressure,with crutch orbutterfly handle,screwed bothends for iron pipe or fo runions and fixed to15mm bore pipe complete all as specified

S&F 20 mm ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repairs complete all as specified

S&F 25 mm ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repairs complete all as specified

S&F 32mm brass chromium plated waste coupling for wash hand basin complete as in repairs all as specified

S & F 150 mm size Grating in square of PTMT complete as in repairs all as specified

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete as in repairs all,as specified

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete as in repairs all as specified.

S&F 75mm dia cast iron soil, waste and vent sand cast pipes, in any length with or without ears with cement joints, laid in trenches or in floors, fixed as in repairs, complete all as specified

S&F 100mm dia cast iron soil, waste and vent sand cast pipes, in any length with or without ears with cement joints, laid in trenches or in floors, fixed as in repairs, complete all as specified

S&F 75mm dia cast iron soil, waste and vent sand cast pipes, in any length with or without ears with cement joints,fixed to wall as in repairs, complete all as specified

S&F 100mm dia cast iron soil, waste and vent sand cast pipes, in any length with or without ears with cement joints,fixed to wall as in repairs, complete all as specified

S&F Cast iron pipes bends (any radius), diminishing pieces or tapers 75mm dia(larger bore measured) complete as in repairs all as specified

S&F Cast iron pipes bends (any radius), dimisishing pieces or tapers 100mm dia(larger bore measured) complete as in repairs all as specified

S&F Cast iron pipes branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75mm dia complete as in repairs all as specified

S&F branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100mm dia complete as in repairs all as specified

S&F PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints, laid in trenches or in floors, complete as in repairs all as specified

S&F PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints, fixed to walls, fixedcomplete as in repairs all as specified

S&F PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints, fixed to walls, fixed complete as in repairs all as specified

S&F PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints, laid in trenches or in floors, fixed complete as in repairs all as specified

S&F PVC (SWR) bends any radius 75mm dia complete as in repairs all as specified

S&F PVC (SWR) bends any radius 110mm dia complete as in repairs all as specified

M&L Concrete bed to 150mm dia drain pipes including packing under,and haunching & packing against the sides of pipes after they are laid and tested in; cement concrete 1:4:8 type D-2 ,40mm graded complete.

M&L Concrete bed to 200mm dia drain pipes including packing under,and haunching & packing against the sides of pipes after they are laid and tested in; cement concrete 1:4:8 type D-2 ,40mm graded complete.

M&L 150mm dia salt glazed stone ware (SGSW) drain pipe Class 'A' (ISI marked) of approved make laid in trenches jointed in CM 1:1 all as specified.

M&L 200mm dia salt glazed stone ware (SGSW) drain pipe Class 'A' (ISI marked) of approved make laid in trenches jointed in CM 1:1 all as specified.

M&L Cutting in to existing manhole of any type for connecting 150 mm bore new drain, making good to pipe and rendering, cutting-out existing benching, for and forming branch channel ( ½ round or ¾ section) in cement concrete 1:2:4 type B1, smooth finish and reforming benching as required complete.

S&F Vitreous China squatting pan, orissa pattern of size 580x440mm, white with integral foot rest incl connection to trap & flushing pipe complete as in repairs all as specified

Fixing only Plastic water closet seat cover of pedestal pan in repairs all as specified

S & F Plastic water closet seat cover white in colour closed pattern with flat bottom, and fixed with mild steel chromium plated or aluminium hinging device including jet spray complete as in repairs all as specified.

S & F Vitreous china wash down water closet pan (pedestal pattern ) p or s type (excluding fixing bolts, flushing cistern and flush pipe) complete as in repairs all as specified

S&F PVC low level valveless syphonic action type flushing cistern 10 Ltrs capacity with all fittings like PVC ball valve etc including flushing pipe handle and brackets complete as in repairs all as specified

S&F Toilet paper holder as in repairs complete all aspecified

S&F Vitreous china wash hand basin of size 550x480mm excluding taps waste, chain and plug and porcelain stopper but including brackets complete as in repairs all as specified.

S & F Health faucet with flexiable stainless steel hose and hook complete as in repairs all as specified

M&L Removal of blokage/choke up obstructing the flow of sewage line of stone ware pipe and RCC pipe between two consecutive manholes or gully trap to manhole by rodding with rods/wood/kamathis/ choke remover and flushing water in line after rodding to clean the line for 100mm dia pipe complete.

M&L Removal of blokage/choke up obstructing the flow of sewage line of stone ware pipe and RCC pipe between two consecutive manholes or gully trap to manhole by rodding with rods/ wood/ kamathis/ choke remover and flushing water in line after rodding to clean the line for 150mm dia pipe complete.

M&L Desilting of man hole up to 1.50m of depth and stacking the silt at the distance exceeding 100m but not exceeding 250m all as directed by Engineer-In-Charge.

M&L Desilting of man hole exceeding 1.50m and n.exceeding 2.5mtr in depth and stacking the silt at the distance exceeding 100m but not exceeding 250m all as directed by Engineer-In-Charge.

M&L Desilting of soakage well/septic tank for 50 users with dewatering including carriage of sludge from tank and disposed to a distance out of MOD land, all as directed by Engineer-in-Charge.

M&L Desilting of soakage well/septic tank for 100 users with dewatering including carriage of sludge from tank and disposed to a distance out of MOD land, all as directed by Engineer-in-Charge.

M&L Desilting of soakage well/septic tank for 150 users with dewatering including carriage of sludge from tank and disposed to a distance out of MOD land, all as directed by Engineer-in-Charge.

M&L Cleaning of WC/EWC and removal of blockage by pumping of waste, all as directed by Engineer-in-Charge.

M&L Cleaning of nahani trap 75mm dia and removal of blockage, all as directed by Engineer-in-Charge.

Cleaning of gully trap of size 125/110mm and removal of blockage, all as directed by Engineer-in-Charge.

Racking out old poly sulphide joint sealant with masking tape from existing Dummy/Contraction joints of dimension 10 mm wide and 10 mm deep and removing the sealant outside the MD land and fixing 12 mm dia polyethylene rod in position as required incl treating the sides and bottom of the joint with primer suitable for sealant and refilled with polyurethane joint sealant compound with masking tape using mechanical means to a minimum depth of 8 mm and minimum movement accommodation factor (MAF)=30% conforming to requirements of BS-5212,BS-4254 and EN 141875-2003 for hydrolysis/ water resistance test and making good surface all as per manufactures instructions.

Racking out old poly sulphide joint sealant with masking tape from existing expansion joints of dimension 20 mm wide and 20 mm deep and removing the sealant outside the MD land and fixing 22 mm dia polyethylene rod in position as required incl treating the sides and bottom of the joint with primer suitable for sealant and refilled with polyurethane joint sealant compound with masking tape using mechanical means to a minimum depth of 8 mm and minimum movement accommodation factor (MAF)=30% conforming to requirements of BS-5212,BS-4254 and EN 141875-2003 for hydroiysis/ water resistance test and making good surface all as per manufactures instructions.

Complete removal of old paintings and preparation of surfaces of concrete and applying two coat of epoxy paint over a coat of primer on pavement of runway/ taxi track/ dispersal area exc 10 cm width but not exc 15 cm width complete all as specified as directed.

ARTI CONSTRUCTION