Upgradation of Deputy Director Planning Room Directorate Office Of Florciculture Department Srinagar.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below

Fixing chowkhat in existing opening in brick/RCC wall with dash fasteners/chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhats and 2 nos. on each vertical member of window chowkhats), including cost of dash fasteners/chemical fasteners.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish all complete as per the directions of Engineer-in-charge.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class kail wood 35mm.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix)

P/L stone soling (Hand packed) in trenches incl. ramming, dressing, watering etc. incl. all leads, lifts and carriage upto site of work complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl cost and carriage of materials involved complete.

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Ordinary cement without any pigment.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Providing & fixing colour coated galvalume high rib / tract deck / tile profile sheets 0.50 mm TCT having a crest height of 28-32mm at 195mm pitch and effective width of 975-1000mm and length to suit site requirement to the purlins using self drilling and self tapping fasteners of reputed make with purlin sheet using valleys and ridges of colour coated galvalume plain sheet makel complete and as directed.(including cost of all material, leads, lifts and carriages etc upto site of work complete).

Providing ridges or hips of width 60cm overall width colourd sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete. 0.50 mm thick.

Providing and fixing Powder coated aluminum work for door and window shutters, partitions with extruded built up standard tubular sections appropriate Z section and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawal plugs and screws are with fixed up of gaps at junction at top, bottom and sides with requires neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws incl. all hardware fittings as required as per architectural drawings and as per directions of Engineer-in- Charge. glazing, panelling of approved thicness all complete.

P/F of Zebra blind curtains with locking arrangement of approved pattern and quality as per the directions of Engineer-in-charge at site complete.

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 25mm dia

Providing and fixing Aluminium hardware fittings of approved make

Tower bolt 100mm

Handle 100mm

Handle 75mm

Sliding Door bolt 300mm long (Al-drop) Stainless steel with lock and key Link/Ramson/ Godrej or equivalent.

P/F Mortice Locks for Doors Link / Godrej/ ramson or equivalent.

P/F Door Closure Capsule Type of approved make

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers including shelf made out of 10mm glass including all necessary fittings and fixtures complete.

P/F Towel Rail single 600 mm long of standard make

P/ F Towel Rack 600 mm of standard make.

Cleaning of walls and floor tiles with required chemicals as per the directions of Engineer-in-charge at site complete.

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Finishing walls with water proofing cement paint of required shade Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick