Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹28.9 CrAWARDED | ₹28.9 Cr | AWARDED |
Tender Value
₹25.4 Cr
EMD Value
₹25.4 L
Closing Date
11 Jul 2025, 9:30 pmClosed
Karnataka Industrial Areas Development Board
Providing Basic Electrical Infrastructure Facilities to Gowribidanur Industrial Area, 3rd phase, Chikkaballapura District
197931
KIADB/2024-25/EL/WORK_INDENT173/CALL-2
Open
Electrical
KIADB Head Office Bangalore
₹7,500
₹25.4 L
14 Jun 2025
14 Jun 2025
14 Jul 2025
21 Jun 2025
23 Jun 2025
Providing Basic Electrical Infrastructure Facilities to Gowribidanur Industrial Area, 3rd phase, Chikkaballapura District
PART-A, Running 11KV Express feeder : Supply of 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as p...
Supply of Heat Shrinkable indoor Type Cable Termination Kit for XLPE Cable 3x400 Sqmm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x400 Sqmm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule 3x400 Sqmm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of 11 kV, 3 core 240sqmm XLPE UG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975, (54 GI Wires - 2.5 m...
Supply of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x240 Sqmm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Heat Shrinkable indoor Type Cable Termination Kit for XLPE Cable 3x240 Sqmm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supplying of HT heat shrinkable straight through joint kit for 11KV 3 core 240sqmm XLPE UG cable. with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of GI Pipe, 150 mm Dia for drain crossing, cable raising etc., (Extracted from Vol-5, BWSSB SR Item No. 177) with all lead and lifts as per specification and direction of Engineer in charge of ...
Laying of UG cable by Trench less technology by adopting horizontal baring and drawing of cables including preparation at side with HDPE pipe. a) Normal soil 6” bore size.
Supply and laying of HDPE pipe grade PE100-PN10.0, 110 mm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supplying of Bricks(Non Modular) for cable covering with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Artificial/Manufacture Sand with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of RCC Hume Pipe, 2000 mm Long, 150 mm Dia with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Collars for RCC Hume Pipe with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of 11 kV, 400 Amps Double Break GOS with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of DP Structure using PSCC Pole - 9 Mtr Long, 300 Kg WL with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of H-Frame for mounting GOS with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Route and Joint Indicating Stoneswith all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of PG Clamps for Rabbit Conductor with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of 11 kV Lightning Arrester, Metal Oxide 10 kV, 5 kA Polymeric Type with ground disconnector with all lead and lifts as per specification and direction of Engineer in charge of the work.
Labour Charges:Laying of high tension 11 KV(E) 3 core 400 sqmm in existing trench/GI pipe/stone ware/RCC Hume pipe using wooden aluminum rollers as directed by engineer incharge of the work 3x400 sqm...
Laying of high tension 11 KV(E) 3 core 240 sqmm in existing trench/GI pipe/stone ware/RCC Hume pipe using wooden aluminum rollers as directed by engineer incharge of the work 3x400 sqmm with all lead...
Earth work in surface excavation by mechanical means for lowering & leveling
the ground for all works other than foundation in all kinds of soils & upto depthnot exceedin g 300mm as per drawing and te...
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Making of straight through joint 3CX400 Sq MM with all lead and lifts as per specification and direction of Engineer in charge of the work.
Making of cable termination (outdoor termination kit) 400 sqmm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Making of cable termination (indoor termination kit)400sqmm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Making of straight through joint 3CX240Sq MM with all lead and lifts as per specification and direction of Engineer in charge of the work.
Making of cable termination (oudoor termination kit)240 sqmm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Making of cable termination (indoor termination kit)240 sqmm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of GI Pipe, 150 mm Dia for drain crossing, cable raising etc., with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of Covering the cable with tiles with all lead and lifts as per specification and direction of Engineer in charge of the work.
Refilling and consolidation
with all lead and lifts as per specification and direction of Engineer in charge of the work.
Spreading Sand and forming with Sand round the cable with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of 11 kV, 400 Amps Double Break GOS with all lead and lifts as per specification and direction of Engineer in charge of the work.
Erection of of DP Structure using PSCC Pole - 9 Mtr Long, 300 Kg WL with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of H-Frame for mounting GOS with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of Route and Joint Indicating Stoneswith all lead and lifts as per specification and direction of Engineer in charge of the work.
Laying of RCC Hume pipe with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of 11 kV Lightning Arrester, Metal Oxide 10 kV, 5 kA Polymeric Type with ground disconnector with all lead and lifts as per specification and direction of Engineer in charge of the work.
PART-B-Providing 11KV Class Compact RMU: RMU 1 OD, 350 MVA, 630 Amps with all lead and lifts as per specification and direction of Engineer in charge of the work.
Compact RMU (VCB/SF6 Type) with
Copper Busbar, 350 MVA, 630 Amps as per IEC-62271/IS-34275 5 Way RMU, 2 OD + 3 VL (One Incomer + Three Breakers + One Outgoing) with all lead and lifts as per specifica...
Compact RMU (VCB/SF6 Type) with
Copper Busbar, 350 MVA, 630 Amps as per IEC-62271/IS-3427 3 Way RMU, 2 OD +1 VL (One Incomer + Three Breakers + One Outgoing) with all lead and lifts as per specificat...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...
Foundation with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supplying, fitting and placing Mild Steel Reinforcement complete as per drawing and technical specification.with all lead and lifts as per specification and direction of Engineer in charge of the work...
Supplying of Frame of MS Channel 100x50 mm and MS angle 40x40x5 mm welding etc., complete with all lead and lifts as per specification and direction of Engineer in charge of the work.
Rod type earthing with 40 mm Dia, 3 Mtr long MS rod as per specification & drawing including digging of pit & fixing with all lead and lifts as per specification and direction of Engineer in charge o...
Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint Brush etc., with all lead and lifts as per specificat...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required
tools and plants etc., complete....
Labour Charges for Erection of RMUs: Earth Excavation for RMU Foundation/TC depositing of earth on bank up to a lead of 50 Mtr and with a lift up to 1.5 Mtr with all lead and lifts as per specificat...
Labour charges for Fixing foundation frame of MS channel 100x50 mm and MS angle 40x40x5 mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from ...
PART-C- Providing 250 KVA Transformer Center :Supply Caution/Danger Board with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of GI Pipe, 100 mm Dia for drain crossing, cable raising etc., with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of PVC Pipe 150 mm Dia with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of PVC Bend 150 mm Dia with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of GI Wire 8 SWG with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Guy wire 7/10 SWG with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Heavy Duty Long Barrel Copper Lug - 120 Sqmm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of LT Metering box with CTs and necessary wiring for housing ETV Meter with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of LT Electronic Tri-Vector Meter 5 Amps, -0.5/1.0 Accuracy Class with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of 11kV/433V, 250 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with oil with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of LT Distribution box for 250KVA with 2 nos of MCCB with all lead and lifts as per specification and direction of Engineer in charge of the work.
Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest
microcontroller based, digital readout of percentage leakage curr...
Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top an...
Supplying and fixing MS Rectangular Angle of size 65X65X6mm fixed in cement cocrete 1:2:4 with 2 numbers of 16mm dia MS holdfast rods for a length of 25cm including cost of all materials, bending, cut...
Labour Charges:Fixing of Caution/Danger Board with all lead and lifts as per specification and direction of Engineer in charge of the work.
Laying of GI Pipe, 100 mm Dia for drain crossing, cable raising etc., with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of LT Metering box with CTs and necessary wiring for housing ETV Meter
Fixing of LT Electronic Tri-Vector Meter 5 Amps, 0.5/1.0 Accuracy Classwith all lead and lifts as per specification and direction of Engineer in charge of the work.
Labour charges for erection of transformer & transformers accessories with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of LT Distribution box for 250KVA with 2 nos of MCCB with all lead and lifts as per specification and direction of Engineer in charge of the work.
Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts as per specification and direction of Engineer in charge of the work.
PART-D LT PortionSupplying & Laying of LT 1.1KV 3.5C X 240 sqmm XLPE UG Cable:Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured 3.5c X 240 Sq MM LTUG Cable ...
Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 240 Sqmm, 3.5/4 Core with all lead and lifts as per specification and direction of Engineer in charge of the work.
Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable 3.5 x 225/240/300 with all lead and lifts as per specification and direction of Engineer in charge of the work.
12 Way HRC Fuse Based Thermoset Plastic LT Feeder Piller Box with all lead and lifts as per specification and direction of Engineer in charge of the work.
Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lifts as per specification and direction of Engineer in charge of the work.
Labour Charges:Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 120 to 240 Sqmm with all lead and lifts ...
Making of Heat shrinkable Straight Through Joint 120 to 240 Sqmm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Making of Heat shrinkable Type Terminations 120 to 240 Sqmm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of LT Feeder piller box (MS & Thermoset Plastic Enclosure) including necessary civil works like soil excavation & concreting etc. complete upto 8 Ways (MS Enclosure) with all lead and lifts as ...
Fixing of Earthing materials pipe type for grounding (Single Electrode with accessories with all lead and lifts as per specification and direction of Engineer in charge of the work.
PART-E: Re-routing of 11KV line using rabbit conductor with 9 mtr support: Supply of RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts as per specification and direction of Engineer in charge o...
Supply of PSCC Pole - 9 Mtr Long, 200 Kg WLwith all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts as per specification and direction of Engineer in...
Supply of DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of 11 kV, 45 KN Polymeric Insulator with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Guy Set Complete with No. 15 Strain Insulator with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Rabbit ACSR Conductor with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of PG Clamps for Rabbit Conductor with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Spiral Earth Electrode with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of EG Stirrups with GI wire lacing with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Caution/Danger Board with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of 11 kV, 200 Amps, Single Break GOS with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of H-frame set for GOS with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of 11 kV, Solid Core Type HG Fuse Unit with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Anti Climbing Device (12 Mtr GI Barbed Wire) with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Spun pole 11 Mtr Long with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of Single Pole Transformer Structure Kit with Three H Frames without tranformer seating and seating Angle support cross arm for 63/100/250/500 kVA (UG Cable) MS with all lead and lifts as per ...
Supply of 8 SWG GI wire for continuous earth wire with all lead and lifts as per specification and direction of Engineer in charge of the work.
Supply of 11 kV, 400 Amps Double Break GOS with all lead and lifts as per specification and direction of Engineer in charge of the work.
Labour charges:Erection of RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts as per specification and direction of Engineer in charge of the work.
Erection of PSCC Pole - 9 Mtr Long, 200 Kg WL with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of 11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr
Long, 145 Kg WL with all lead and lifts as per specification and direction of Engineer in...
Erection of DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of Guy Set Complete with No. 15 Strain Insulator with all lead and lifts as per specification and direction of Engineer in charge of the work.
strringing of Rabbit ACSR Conductor with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of Spiral Earth Electrode with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of EG Stirrups with GI wire lacing with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of Caution/Danger Board with all lead and lifts as per specification and direction of Engineer in charge of the work.
Erection of 11 kV, 200 Amps, Single Break GOS with all lead and lifts as per specification and direction of Engineer in charge of the work.
Erection of H-frame set for GOS with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of 11 kV, Solid Core Type HG Fuse Unit with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of Anti Climbing Device (12 Mtr GI Barbed Wire) with all lead and lifts as per specification and direction of Engineer in charge of the work.
Erection of Spun pole 11 Mtr Long with all lead and lifts as per specification and direction of Engineer in charge of the work.
Fixing of Single Pole Transformer Structure Kit with Three H Frames without tranformer seating and seating Angle support cross arm for 63/100/250/500 kVA (UG Cable) MS with all lead and lifts as per ...
Erection of 11 kV, 400 Amps Double Break GOS with all lead and lifts as per specification and direction of Engineer in charge of the work.
Concreting materials for 11 Mtrs Spun Pole a Base concreting 1:2:4, 1000x1000x150 with all lead and lifts as per specification and direction of Engineer in charge of the work.
Concreting materials for 11 Mtrs Spun Pole b Pole concreting 1:2:4, 1000x1000x2500 with all lead and lifts as per specification and direction of Engineer in charge of the work.
Concreting materials for 11 Mtrs Spun Pole c Coping 1:2:4 (as per actuals) with all lead and lifts as per specification and direction of Engineer in charge of the work.
Guy concreting with Boulders, Mud and Sand with all lead and lifts as per specification and direction of Engineer in charge of the work.
Part-F providing CCTV:Smart Surveillance System (CCTV): using PTZ & Fixed cameras, OFC monitoring system, HMI etc., as per specification PTZ Camera Specification: (1) Lens type: Auto focus with Optica...
Labour charges for Releasing of existing line/ DTC's to be handed over to BESCOM: Releasing of 9 mtr RCC poles with all lead and lifts as per specification and direction of Engineer in charge of the ...
Releasing of 9mtr PSC poles with all lead and lifts as per specification and direction of Engineer in charge of the work.
Releasing of horizontal cross arm with all lead and lifts as per specification and direction of Engineer in charge of the work.
Releasing of Rabbit Conductor with all lead and lifts as per specification and direction of Engineer in charge of the work.
Releasing of DP structure with all lead and lifts as per specification and direction of Engineer in charge of the work.
Releasing of SPMS with all lead and lifts as per specification and direction of Engineer in charge of the work.
Releasing of DPST with all lead and lifts as per specification and direction of Engineer in charge of the work.
Releasing of GOS 200A Single Brak with all lead and lifts as per specification and direction of Engineer in charge of the work.
Releasing of 25KVA TC with all lead and lifts as per specification and direction of Engineer in charge of the work.
Releasing of 63KVA TC with all lead and lifts as per specification and direction of Engineer in charge of the work.
Releasing of 100 KVA TC with all lead and lifts as per specification and direction of Engineer in charge of the work.
Download all tender documents and submit your bid