Alternate Water Facility from Saurashtra Branch Canal to WRPL Viramgam

Amount

Depth upto 1.5 m (measured from original ground level)

Depth between 1.5 m to 5.0 m

Providing and laying structural Reinforced Cement Concrete of specified grade conforming to IS:456 in foundation, plinth, ramps, grade slab etc. all work up to plinth level including providing centering, shuttering, staging, scaffolding, form work, compacting with mechanical vibrator, finishing, curing with water etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer. (Payment for Reinforcement shall be made as per relevant item of SOR).

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Supplying & providing Thermo-Mechanically Treated (TMT) HCR/CRS Fe 500D bars (reinforcement for reinforced cement concrete works) conforming to IS:1786 including initial straightening of coiled/uncoiled bars, removal of loose rust, cutting, bending to correct size & shape, placing at any position, at any height & depth with proper size concrete cover block & supports, binding with 18 Gauge G.I. wire at each intersection, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles, transportation, loading, unloading etc. as per drawings, specifications and direction of the Engineer-in-Charge/ Site Engineer.

Providing & laying in position Plain Cement Concrete (PCC) of specified grade at all depths in foundation, floor or other places including ramming, dewatering, providing centering, shuttering, staging, scaffolding, compacting with mechanical vibrator, removal of form work, finishing, curing with water, etc., inclusive of cost of all labour, materials, tools, tackles etc. complete in all respects as per drawings, specifications and direction of the Site Engineer. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth including curing, labour, materials, etc. complete. In Cement mortar 1:4 (1 cement : 4 coarse sand)

Demolishing brick work (in cement mortar) manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material as per direction of Engineer-in-charge.

Supplying, fabricating and erecting including embedding in RCC/ PCC in position MS structural steel section such as angle, tees, channels, beams and other standard sections, painting two coats of synthetic enamel paint of 25microns DFT each over a coat of Red Oxide steel primer of 25micron DFT including cleaning the surface of mill scales, rusts, oil, grease and weld slags etc. by hand cleaning, welding as per IS 800, including the cost of all materials, transportation, welding, labour, tools, tackles, consumables, power etc. complete in all respects as per specifications and directions of Engineer-in-charge/ Site Engineer. The item shall be paid for in Metric Tonne.

Members fabricated from rolled steel sections/plates/strips etc. and foundation bolts

Above ground piping for Fire Fighting Services with Internal Epoxy coating: Taking delivery of pipes, pipe fittings, carbon steel flanges (SORF/WNRF), spiral wound metallic gaskets & fasteners from designated location within station premises, transporting the same to site, fabrication and erection of aboveground piping including cutting, edge preparation, bending, threading, Lining up, welding of SORF flanges On both sides of the pipe section of length not more than 12 m & fittings, and erecting pipe sections with SORF end connections and pipe Fittings, flanges, elbows, equal and reducing outlet tees, concentric/ eccentric reducers, drain funnels, vent pipes and tapping for Instruments such as pressure gauges, thermal relief valves, thermo wells etc., installing above ground at all elevations connecting with equipment nozzles, valves, vessels, inline instruments etc., welded / SORF /WNRF flange connected and threaded pipeline of different pressure ratings, flushing pipes by water after cleaning by compressed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, final cleaning-up and disposal of wastes and surpluses including providing all inputs such as labour, material, equipments and consumables necessary to perform the work (other than Those specifically under taken by the owner in this contract). The scope shall Also include blast cleaning of internal surface of pipes, Pipe fittings, and Valves...etc conforming to ISO- SA 21/2, followed by application of Two Component solvent free amine cured epoxy coating with thickness of 350-400Microns and completing the work in all respects in accordance with the drawings, specifications and instructions of the Site Engineer /EIC.

18" OD x 0.375" WT, IS: 3589, Gr. Fe 410 Pipe

12.75" OD x 0.250" WT, IS: 3589, Gr. Fe 410 Pipe

2.375" OD x 0.218" WT ASTM A 53 Gr. B Pipe

1.315" OD x 0.179" WT ASTM A 53 Gr. B Pipe

Underground piping for Fire Water Services: (With Internal Epoxy Coating and external Epoxy/ PU Coating) Taking delivery of pipes, pipe fittings, steel flanges (WNRF/ SORF), spiral wound metallic gaskets & fasteners from designated location within station premises transporting the same to site, fabrication and erection of underground piping including cutting, edge preparation, bending, threading, lining up and welding of SORF flanges on both sides of the pipe section of length not more than 12 m & fittings, excavating, trenching in all kind of soil to specific depths as indicated in drawings and and erecting pipe sections with SORF end connections and pipe fittings such as elbows, equal and reducing outlet tees, concentric/ eccentric reducers, drain funnels, vent pipe and tapping for instrument such as pessure gauges, thermal relief valves, thermo wells etc., underground at elevations indicated in the drawing connecting with equipment nozzles, valves, vessels, in-line instruments etc., Cleaning exposed steel surfaces of Bare Pipes, Pipe Joints, Fittings, Flanges, equipment and valves etc. by sand blasting or with power wire brush (wherever sand blast cleaning is not possible) free of dust, grease, mill scales etc. and applying single layer polyurethane coating (PU) using 100% solvent free elastomeric plyurethane/ liquid epoxy, with approved materials, Equipment etc, holiday detection of the coating, cleaning of coated pipes by water flushing after cleaning by compresed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, backfilling, restoration of site final cleaning up and disposal of water and surpluses, providing all inputs such as labour, material, equipments and consumables necessary to perform the work (other than Those specifically under taken by the owner in this contract). The scope shall Also include blast cleaning of internal surface of pipes, Pipe fittings, and Valves...etc conforming to ISO- SA 21/2, followed by application of Two Component solvent free amine cured epoxy coating with thickness of 350-400Microns and completing the work in all respects in accordance with the drawings, specifications and instructions of the Site Engineer /EIC.

18" OD x 0.375" WT, IS: 3589, Gr. Fe 410 Pipe

Cold cutting of 18 IN crude pipeline for piping modification and installation of 18" valve/pipe fittings : After water flushing of inlet line , cold cutting of 18# pipe as per site condition for installation of 18# gate valve or ball valve/equal tee etc as per instructionsof Engineer-in-Charge/ Site Engineer. The Contractor shall arrange for suitable cold cutting machine, associated tools& ackles,operators, consumables, compressor, hoses etc. for carrying out the cold cutting of pipe. After cold cutting of piping, mud plugging of line is to be done followed by welding of 18# flanges (separateSOR item), preparation of valve foundation/supports (separate SOR item) for installation of gate valve ( installaion of valve- separte SOR item) by the Contractor. The Contractor's scope is including cold cutting of line,modification in existing piping to facilitate installation of 18# valve/Equal tee and mud plugging required for welding of 18 IN WNRF. All required manpower,equipment, tools, tackles,materials, consumables etc. for completion of work in all respects as per tender specifications and as per instructions of Engineer-in-Charge/Site Engineer. Note: "EA" shall mean "No. of cut in 18"pipe". NOTE: The job also include evacuation of product from the piping section after isolating the section and flushing with water and its disposal.

Hook-up of New Piping with existing Piping by Single Cut/Flange Joint: Cutting of portion of existing piping/ Opening of WNRF/SORF/Blind Flange, trimming, grinding, bevelling the edges, aligning with/ without addition of spool piece, welding the joint including supply of all inputs such as labour, materials, equipment, consumables etc. necessary to perform and complete the work in all respect as per specification and instruction of the Site Engineer / EIC.NOTE: The job also include evacuation of product from the piping section after isolating the section and flushing with water and its disposal.

18" OD x 0.375" WT (***-*** Nos.)

Hook-up of New Piping with existing Piping by Double Cut/Flange Joint:Cutting of portion of existing piping of required length/ Opening of WNRF/SORF/Blind Flange trimming, grinding, beveling the edges, adding spool piece of required length/ Tee of the corresponding pipe size, thickness, adjoining and welding both the ends including supply of all inputs such as labour, materials, equipment, consumables etc. necessary to perform and complete the work in all respect as per specification and instruction of the Site Engineer / EIC.NOTE: The job also include evacuation of product from the piping section after isolating the section and flushing with water and its disposal.

18" OD x 0.375" WT (***-*** Nos.)

Painting: Cleaning exposed steel surfaces of piping, equipment and valves etc. by sand blasting or with power wire brush (wherever sand blast cleaning is not possible) free of dust, grease, mill scales etc. priming with two coats of primer and painting the surfaces with two coats as per specification, with approved materials, paints, brushes, labour, equipment etc. and completing the job in all respects as per specification and instructions of the Site Engineer / EIC.

Epoxy Zinc Phosphate Primer

High Build Epoxy Finish Paint

Installation of Valves:Taking delivery of valves of all types and pressure rating from the designated location within station premises, transporting the same to site, erecting above ground on preconstructed foundations or underground including earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, flood coating and wrapping of under ground portions (if applicable) including all inputs, labour, material and consumable (other than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC.

18"x ANSI 150 # HOV F/F API 600 Gate Valve

12"x ANSI 150 # HOV F/F API 600 Gate Valve

SUPPLY ITEMS

Supply of ASTM A 106 GR.B STEEL PIPES

2.375" OD x 0.218" WT

1.315" OD x 0.179" WT

Supply of Pipe Fittings and fixtures

Y TYPE STRAINER 18INX18IN 150

18"x ANSI 150 # HOV F/F API 600 Gate Valve

12"x ANSI 150 # HOV F/F API 600 Gate Valve

ELBO,90,LR,BW,CS,A234,WPB,18IN,STD

ELBO,90,LR,BW,CS,A234,WPB, 12IN, 150

ELBO,45,LR,BW,A234,WPB,18IN,STD

ELBO,45,LR,BW,CS,A234,WPB,12IN,150

TEE,EQ,BW,CS,A234,WPB,18IN,STD

TEE,EQ,BW,CS,A234,WPB,12IN,STD

18" SORF ANSI 150#

12" SORF ANSI 150#

18" BLRF ANSI 150#

12" BLRF ANSI 150#

SWING CHECK,FULLSWING,RF,API6D,150,12IN

SWING CHECK,FULLSWING,RF,API6D,150, 18IN

Gaskets:Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material

18" SWMG ANSI 150# (***-*** Nos.)

12" SWMG ANSI 150# (***-*** Nos.)

Fasteners:Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical specifications indicated in tender documents.

Fasteners for Flanges 18" x 150# (1.125" Dia. X 6.50" Length - *** Nos.)

Fasteners for Flanges 12" x 150# (0.875" Dia. X 5.50" Length - *** Nos.)

VIKAS INSULATION COMPANY

M/S. ORANGE

Jay Gauri Projects (I) Pvt. Ltd.