REPAIRS TO LT UNDERGROUND CABLES AND REPAIRS/MAINTENANCE OF PERIMETER LIGHTING, SECURITY LIGHTS INCLUDING TIMER SWITCHES AND OTHER CONNECTED ITEMS AT SHALATENG GARRISON UNDER AGE (I) CIF (K).

Amount

Dismantling & removing existing old/damaged/unserviceable ACSR conductor of any size/type from over head lines on existing poles including binding with insulators safely etc complete and making proper roll of ACSR conductor for reuse or depositing in store and also insulators safely for reuse/depositing in store all as specified and directed. Note :- ACSR Conductor and Insulators with supporting clamp of any type shall be kept seperately for reuse or depositing in store all as directed by Engr-in-Charge.

Dismantling existing unserviceable galvanized iron steel wire drawn straight or horizontal as continuous earth wire on existing LT poles of any size and making roll for reuse or depositing in storet all as directed.

Taking down old existing any type of cross arms, supports, channels, Clamps, flat irons etc fabricated from MS sections of any size and any type including nuts, bolts, washers of any shape/size complete all as directed by Engr-in Charge.

Supplying, laying, jointing and testing XPLE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm, 3.5 core in trenches, through pipe, under culvert or in air complete all as directed including supply and fixing of cable lugs as per site requirement all as specified and as directed by Engr in Charge. Note :- Underground Cable will be provided between pole to pole for security lights.

Providing PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in coping around poles including necessary form work and fair finishing of exposed surfaces without using extra cement complete all as specified.

Dismantling old earthing and providing new earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 Metres below normal ground level, connecting to the Galvanised iron earth lead wire 4mm dia, by means of bolts, nuts, check nuts and washers of galvanised iron and 4mm earth lead protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR-2009 Part-I and connecting to earth test point including testing on completion all as specified and directed by the Engineer-in-charge.

Painting of steel tubular pole 9 mtr long, by applying two coats of aluminium paint after scraping/brushing and cleaning the rust on pole and cross arms. Aluminium painting will be done on pole above 1.5 mtr height from ground level and balance 1.5 mtr from ground level will be painted by alternate layer of black and yellow alternate strips of 30 cm each with synthetic enameled paint complete all as directed by Engr-in-Charge.

Numbering of poles with synthetic enameled black paint in yellow circle of 150mm dia complete all as specified and directed. Note:- The numbering shall be hand written only. Stencils embossing shall not be allowed and size of letter shall be 50 x 10 mm (height x width ).

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cable and foundation of poles, stays and getting out in any type of soil complete all as specified and directed by Engineer-in-Charge.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each layer in any type of soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete complete all as specified and as directed by Engineer-in-Charge.

Sand cushioning to underground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable all as specified and directed. by Engineer-in-Charge. Note: Punned thickness of sand shall be measured.

Common burnt sub class ‘B’ brick laid flat in trenches over and across the length of cable with length of brick perpendicular to the direction of cable adjacent/abutting each other complete all as specified and directed for cable protection.

GI pipe 50mm bore light grade with all fittings laid in trenches/wall/poles for cable protection, complete all as specified and directed including taking down old.

Dismantling old junction box and providing new mild steel cable junction boxes/Bus bar chamber of size not less than 250 x 300 x 125mm and made out of 2mm thick MS sheet in factory/work shop by welding/bending and making shape in bus bar pattern cold or Hot with front operated MS door, rubber gasket all around the door cover for water proofing and one side fixed on two hinges for opening of door and other side with locking arrangement for locking of door, complete in Bus bar pattern along with two nos of cable entry at bottom side of box including supply of two nos cable gland of size 35 sqmm and top of the box in canopy roof type, also material and labour for fixing with insulators eight numbers ( working on 1100 volts grade ) for fixing/mounting with and including Bus bar aluminium strip 4 nos, 4 pole 440 volts rating 100 Amp capacity (Three for phase and one for neutral) with colour code and accordingly fixed with PVC sleeves 440 volts, making hole 3 Nos in each busbar strip in factory/workshop made out for fixing of cable of 35 sqmm size, complete with mounted on pole with suitable size of fastners/clamps/nuts, bolts and washers as required at site including MS nuts, bolts and washers of suitable size for fixing of cable in busbar strip complete including painting of box inner side and out side with one coat of red oxide primer and two coats of synthetic enamel paint all as specified and as directed. Note :- All work will be considered as one job and drawing/design of cable junction box/bus bar chamber shall be got approved from Engr-in-Charge before ordering for manufacturing.

S&F in replacement MCB DB, SPN 2 way enclosure boxe in PVC body, weather proof with MCB SPN 16 Amp C series 10 KA complete all as directed including necessary clamps, nut, bolts and washers for mounting/fixing on pole all as directed.

S&F in replacement 2 core copper conductor cable flexible PVC insulated and served with inner sheathing of PVC, sheeathed in service connection for security lights fixed on pole from MCB DB fixed at the bottom of pole to top of pole for security light fittings connection with and including making hole in pole at both places, the bottom and top of pole for taking out service copper cable 2 core from inner body of pole from bottom to top complete all as directed by Engr-incharge.

S&F in replacement PVC flexible pipe heavy duty weather proof for protection of 3 core copper conductor cable flexible for security lights at exposed/out side area from inner dia of pole near to MCB DB fixed at the bottom of pole and top of pole for security light fittings complete all as directed by Engr-in-Charge.

Taking down existing cable and Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC sheathed in service conections twin core cable flat or circular, 10 Sqmm stranded conductor complete all as specified.

Dismantling and taking down HPSV/CFL street light fittings/LED security light fittings from the existing pole etc for repair and replacement all as directed at site.

Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purpose lighting high power LED Flood light fitting 100 watts with heat resistant toughned glass complete with all accessories including connecting using suitable wire complete all as specified and directed including taking down old unserviceable. Make - Havells Cat part No. LHEPCZU7PA6J100/Crompton Cat part No. LFLN-100-CDL/60/Bajaj Cat part No BARFEG 100W LED or equavalent in Phillips/Wipro/Syska.

LED streetlight made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 LED street light fitting 100 watts with heat resistant toughned glass complete with all accessories including connecting using suitable wire complete all as specified and directed including taking down old unserviceable. Make - Havells Cat part No. ENDURACITYLINERNEOSL100WLED757SASYBOTG/ Bajaj Cat part No BRTFG 100W LED WW/Crompton Cat Part No.LSTN-100-CDL-A or equavalent in Phillips/Wipro/Syska.

New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 LED street light fitting 40/45 watts with heat resistant toughned glass complete with all accessories including connecting using suitable wire complete all as specified and directed including taking down old unserviceable. Make - Havells Cat part No. ENDURAPEARLNEOSL40WLED757PASYTOPC/ Bajaj Cat part No BRTFG 45W LED I/Crompton Cat Part No.LSTP-45-CDL or equavalent in Phillips/Wipro/Syska.

New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP OPENING seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device LED street light fitting 70/72 watts with heat resistant toughned glass complete with all accessories including connecting using suitable wire complete all as specified and directed including taking down old unserviceable. Make - Havells Cat part No. ENDURAPEARLPLUSSL70WLED757SASYTOPC/ Bajaj Cat part No BRTFG 72W LED V3/Crompton Cat Part No.LSTP-72-CDL or equavalent in Phillips/Wipro/Syska.

Street/Security light fitting LED type suitable with metal body fixed in high quality of reflector, acrylic cover transparent for clear illumination of lamp, water proof LED fitting with and including holder and E-27 type LED lamp complete set with clamps, nuts, bolts and washers for fixing or mounting on wall/pole of capacity 14 watt complete with all accessories including connecting using suitable wire complete all as specified and directed including taking down old unserviceable. Make - Havells/Bajaj/CromptonPhillips/Wipro/Syska or equivalent as approved by Engineer-in-Charge.

Mild steel wall bracket of suitable size and length for mounting of security light fittings with and including mounting on wall/pole with suitable size of clamps, nuts, bolts and washers complete all as specified and directed at site.

Supply and fixing in replacement of timer box of size 600mm x 600mm x 400mm wall mounted/pole mounted/floor mounted with all fixing arrangement as required at site, with and including fixing of all timer box accessories like MCCB 63 Amp, 16 KA, 4 pole, 440 volts -01 No, power contactor 3 pole, 440 volts operated on 230 coil voltage and suitable for load of 63 Amp on each phase -01 No, MCB DB 2 way with MCB SPN C Series 10 KA 16 Amp -01 No, timer switch working on 24 hrs for Security lights work in on 7 x 24 hours for on/off control to security/area lights including suitable size of box complete including all wiring connections of required size as per IE norms and all as directed. Notes - (i) Cost of all other accessories for proper functioning of timer box including MCB SPN 16 amp with PVC MCB DB enclosure box, PVC/Backelite connector 4 pole, cable/wiring work including cable thimbles etc to be included in the rate quoted for this item. (ii) MCCB, Timer Switch, contactor will be measured and paid seperately under appropriate items of BOQ as supply only.

Supply only of ML-4 contactor 3 pole, 440 volts, 70 Amp with working on coil voltage 240 volts, complete all as specified. Make - L&T/Havells/ABB/Schneider/Legrand

Supply only of digital programmable time switch operated on 24 hours and 240 volts for lighting of high mast light fittings, complete all as specified and directed by Engr-in-Charge. Make -Havells Cat part No DHTDD15016 or equivalent in L&T/Legrand/ABB/Schneider.

Supply only MCCB 4 pole, 63 amps, 440 volts, 16 KA complete all as specified.

Supply and replacement of Driver for LED street light fittings of capacity 40/50 watt, complete all as specified and directed by Engr-in Charge. Make - Bajaj/Havells/Syska/Surya/Philips/Crompton.

Supply and replacement of Driver for LED street light fittings of capacity 70 watt, complete all as specified and directed by Engr-in Charge. Make - Bajaj/Havells/Syska/Surya/Philips/Crompton.

Supply and replacement Driver for LED street light fittings of capacity 150 watt, complete all as specified and directed by Engr-in Charge. Make - Bajaj/Havells/Syska/Surya/Philips/Crompton. General Note:- Credit schedule has been given separately under tender documents and shall be adjusted in general summary by the deptt. for arriving at net contract sum.

M/s KASHMIR BUILDERS