REPAIR AND MAINTENANCE OF INTERNAL ELECTRIFICATION INCLUDING REPLACEMENT OF OLD UNSV LIGHT FITTING

Amount

Taking down carefully existing aluminum/copper surface/concealed point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards and making good the disturbed surfaces in CM 1:3 of walls, floors, ceiling etc including distempering to match with existing surfaces complete all as specified and directed.

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in and including concealed non metallic rigid PVC conduit not less than 20 mm dia with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6 mm thick, 60 mm deep of required size factory made for mounting switch, regulators etc with and including 3 mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following:- Make of wire: Finolex,Havells, Gloster, Grandlay. Make of conduit: Finolex, Jindal, Modi, Asian Note: (i) The quoted rates shall be deemed to be inclusive for cutting chasing in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp switch

One fan/exhaust fan point controlled by one, one way 6 Amp switch

One 5 pin 5/6 Amps socket outlet point on the same board .

One 5 pin 5/6 Amps socket outlet point on independent board.

One bell point controlled by one, one way 6 Amp button switch.

All as per item No 2 here-in-before but point wiring with 2.5 sq mm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sq mm PVC insulated multistranded copper conductor cable as continous earth wire.

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in and including PVC casing & caping/conduit with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6 mm thick, 60 mm deep of required size factory made for mounting switch, regulators etc with and including 3 mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following:- Make of wire: Finolex,Havells, Gloster, Grandlay. make of casing caping : Finolex, Jindal, Modi, Asian Note: (i) The quoted rates shall be deemed to be inclusive for fixing the casings to surface with using PVC rawl plugs etc. (ii) Point wiring and Earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp switch

One fan/exhaust fan point controlled by one, one way 6 Amp switch

One 5 pin 5/6 Amps socket outlet point on the same board

One 5 pin 5/6 Amps socket outlet point on independent board

One bell point controlled by one, one way 6 Amp button switch.

All as per item No 4 here-in-before but point wiring with 2.5 sq mm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sq mm PVC insulated multi strand copper conductor cable as continous earth wire.

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in existing conduit with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6 mm thick, 60 mm deep of required size factory made for mounting switch, regulators etc with and including 3 mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following:- Make of wire: Finolex,Havells, Gloster, Grandlay. make of casing caping : Finolex, Jindal, Modi, Asian Note: (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp switch

One fan/exhaust fan point controlled by one, one way 6 Amp switch

One 5 pin 5/6 Amps socket outlet point on the same board with

One 5 pin 5/6 Amps socket outlet point on independent board

One bell point controlled by one, one way 6 Amp switch.

All as per item No 6 here-in-before but point wiring with 2.5 sq mm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sq mm PVC insulated multi strand copper conductor cable as continous earth wire.

S & F switch piano, flush type, single pole one way, 5/6 Amp complete all as directed. "Make: Anchor, Legrand, Havells"

S & F switch piano, flush type, single pole one way, 15/16 Amp complete all as directed. "Make: Anchor, Legrand, Havells"

S & F socket outlet, multipurpose, 2 in 1 5 pin, 5 Amp complete all as directed. "Make: Anchor, Legrand, Havells"

S & F socket outlet, multipurpose, 2 in 1 5 pin, 15 Amp complete all as directed."Make: Anchor, Legrand, Havells"

S & F for Electronic step type fan regulator 100 watt 230 volts AC 50 Hz complete all as directed. "Make: Anchor, Legrand, Havells"

S & F Bell AC 230 volts single pole complete all as directed. "Make: Anchor, Legrand, Havells"

S & F Bell push flush type, 5 Amps complete all as directed. "Make: Anchor, Legrand, Havells"

Material and labour for modular point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in and including existing concealed conduit with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including inner and outer frame plate matching with surrounding with modular sunken steel boxes zinc oxide plated of suitable size for mounting modular switches, sockets ,regulator etc complete for the following:- Make of wire:- Finolex, Havells, Gloster, Grandlay. Make of conduit:- Finolex, Jindal, Modi, Asian Note: (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp modular switch.

One fan/exhaust fan point controlled by one, one way 6 Amp modular switch.

One 5 pin 5/6 Amps socket outlet point on the same board

One 5 pin 5/6 Amps socket outlet point on independent

One bell point controlled by one, one way 6 Amp modular switch.

All as per item No 15 here-in-before but point wiring with 2.5 sq mm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sq mm PVC insulated multistranded copper conductor cable as continous earth wire.

Material and labour for modular point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in and including concealed non metallic rigid PVC conduit not less than 20 mm dia with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including inner and outer frame plate matching with surrounding with modular sunken steel boxes zinc oxide plated of suitable size for mounting modular switches, sockets,regulator etc complete for the following:- Make of wire:- Finolex, Havells, Gloster, Grandlay. Make of conduit:- Finolex, Jindal, Modi, Asian Note: (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp modular switch.

One fan/exhaust fan point controlled by one, one way 6 Amp modular switch.

One 5 pin 5/6 Amps socket outlet point on the same board

One 5 pin 5/6 Amps socket outlet point on independent board

One bell point controlled by one, one way 6 Amp modular switch.

All as per item No 17 here-in-before but point wiring with 2.5 sq mm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sq mm PVC insulated multistranded copper conductor cable as continous earth wire.

Material and labour for modular point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in and including PVC CASING AND CAPING with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including inner and outer frame plate matching with surrounding with modular sunken steel boxes zinc oxide plated of suitable size for mounting modular switches, sockets ,regulators etc complete for the following:- Make of wire:- Finolex, Havells, Gloster, Grandlay. Make of conduit:- Finolex, Jindal, Modi, Asian Note: (i) The quoted rates shall be deemed to be inclusive for fixing the casings to surface with using PVC rawl plugs etc. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates.

One light point controlled by one, one way 6 Amp modular switch.

One fan/exhaust fan point controlled by one, one way 6 Amp modular switch.

One 5 pin 5/6 Amps socket outlet point on the same board

One 5 pin 5/6 Amps socket outlet point on independent board .

One bell point controlled by one, one way 6 Amp modular switch.

All as per item No 19 here-in-before but point wiring with 2.5 sq mm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sq mm PVC insulated multistranded copper conductor cable as continous earth wire.

S & F Modular switch single pole one way 6 Amp fixed complete all as directed. Make: Anchor, Legrand, Crabtree (Havells), MK (Honeywell).

S & F for Modular switch single pole one way 16 Amp complete all as directed. Make: Anchor, Legrand, Crabtree (Havells), MK (Honeywell).

S & F Modular socket outlet 2/3 pin combined 6 Amp 240 volts fixed complete all as directed. Make: Anchor, Legrand, Crabtree (Havells), MK (Honeywell).

S & F Modular socket outlet 2/3 pin combined 16 Amp 240 volts complete all as directed. Make: Anchor, Legrand, Crabtree (Havells), MK (Honeywell).

S & F Modular bell push flush type, 5 Amps complete all as directed. Make: Anchor, Legrand, Crabtree (Havells), MK (Honeywell).

S & F fan regulator modular step type 120W 240 volts 2 module type complete all as directed. Make: Anchor, Bajaj, Crompton, Havells, Usha

S&F ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed. Make: Anchor, Crab tree, Ess Ess Kay

S & F in repairs MCB DB,s double door SPN with 200 Amps rated copper bus bar with neutral bar,earth bar,cable ties for cable management, fully shrouded neutral bars ,reversible door, 240 volts with blanking plates where required and IP 43 DB,s degree protection of following capacity including taking down old unsv DB,s complete all as directed :-

4 way SPN DB.Make :legrand Cat No.507612equvilent in L&T, Schneider

8 way SPN DB. Make :legrand Cat No.507612equvilent in L&T, Schneider

12way SPN DB.Make :legrand Cat No.507612equvilent in L&T, Schneider

16 way SPN DB.Make :legrand Cat No.507613equvilent in L&T, Schneider,

S & F in repairs Distribution boards epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall and suitable for universal mounting with 250 Amps fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 DB,S protection,415 volt and suitable for fixing FP MCCB 100/125 Amps as incomer and 24 SP MCBs or 4/8/ 12 TP MCBs (or any combination of SP/TP MCBs) outgoings of following capacity including taking down old unsv MCCB DB,s complete all as directed :- Note: Suitable MCCB and outgoing MCBs will be measured separately under relavant items of this schedule)

4 Way DB VTP&N (FP MCCB +12 MCB,C). Make :legrand Cat No. 507745 equvilent in L&T, Schneider

8 WAY DB VTP&N (FP MCCB +24 MCB,s) Make :legrand Cat No.507747equvilent in L&T, Schneider

S & F in repairs MCCB 4 pole 415 volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting of following capacity including taking down old unsv MCCB ,s complete all as directed :-

100 Amps Cat No. 420035 of Legrand, equvilent in L&T, Schneider

125 Amps Cat No. 420035 of Legrand, equvilent in L&T, Schneider

S & F in repairs MCB 240 volts 'B' Curve 10 KA, including connection with suitable size copper lugs including taking down old unsv MCB,s for following Rating /capacity complete all as directed. Make: Legrand, L&T, Schneider

MCB SP6 to 32 Amp.240 volts

MCB SP 40 to 63 AMPS 240 volts

MCB SPN 6 to 32 Amps 240 volts

MCB SPN 40 to 63 Amps 240 volts

MCB TPN 63 Amps, 415 volts

MCB TPN 100 Amps, 415 volts

S & F in repairs sheet metal enclosure, single pole and neutral with two pin and earth plug and socket with and including one single pole MCB 20 Amps, 240 volts,10 KA including taking down old unsv sheet metal enclosure complete all as directed. Make: Legrand, L&T, Schneider

S & F sub main wiring with PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in and including rigid PVC conduit in concealed/surface as required at site including one run PVC insulated unsheathed cable with multi stranded copper conductor colour code as a earth continuity and connected upto DB including taking sown old unsv submain wiring of following sizes complete all as specified and directed. Note:Two/Four run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. (ii) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC rawl plugs etc. (iii) Phase sequence colour code must be follow i.e Phase( Red) and Neutral ( Black) In colour and For three Phase RYB For phase and black for neutral. :- Make:- Polycab, MSCAB,Grandlay, BONTON.

2 x 10 Sqmm + 1 x 10 sqmm

2 x 6 Sqmm + 1 x 6 sqmm

2 x 4Sqmm + 1 x 4 sqmm

2 x 2.5Sqmm + 1 x 2.5 sqmm

4 x 6Sqmm + 1 x 6 sqmm

4 x 10 Sqmm+ 1 x 10 sqmm

S&F in repair fan regulator modular step type 120W 240 volts 2 module type complete including taking down old unsv fan rgulator all as directed. Make: Anchor, Bajaj, Crompton, Havells, Usha

S&F in repair Modular switch single pole one way 6 Amp including taking down old unsv switch complete all as directed. Make: Anchor, Legrand, Crabtree (Havells), MK (Honeywell).

S&F in repair Modular switch single pole one way 16 Amp including taking down old unsv switch complete all as directed. Make: Anchor, Legrand, Crabtree (Havells), MK (Honeywell).

S&F in repair Modular socket outlet 2/3 pin combined 6 Amp 240 volts including taking down old unsv socket complete all as directed. Make: Anchor, Legrand, Crabtree (Havells), MK (Honeywell).

S&F in repair Modular socket outlet 2/3 pin combined 16 Amp 240 volts including taking down old unsv socket complete all as directed. Make: Anchor, Legrand, Crabtree (Havells), MK (Honeywell).

S&F in repair Modular bell push flush type, 5 Amps including taking down old unsv bell push complete all as directed. Make: Anchor, Legrand, Crabtree (Havells), MK (Honeywell).

S&F in repair Bell push flush type, 5 Amps including taking down old unsv bell push complete all as directed. Make: Anchor, Legrand, Havells.

S&F in repair Bell AC 230 volts single pole complete all as directed. Make: Anchor, Legrand, Havells.

S&F in repair ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body including taking down old unsv ceiling rose complete all as directed. Make: Anchor, Crab tree, Ess Ess Kay

S&F in repairs Electronic steppped type fan regulator 100 watt 230 volts AC 50 Hz including taking down old unsv fan regulator complete all as directed. Make: Anchor, Bajaj, Crompton, Havells, Usha

S&F in repairs Batten holder, PVC/polycarbonate type with back plate suitable for batten fittings including taking down old unsv batten holder complete all as directed. Make: Anchor, Crab tree, Ess Ess Kay, Plaza

S&F in repairs switch piano, flush type, single pole one way 6 Amp including taking down old unsv switch complete all as directed. Make: Anchor, Legrand, Havells.

S&F in repairs switch piano, flush type, single pole one way 16Amp including taking down old unsv switch complete all as directed. Make: Anchor, Legrand, Havells.

S&F in repairs socket out let, multipurpose, 2 in 1 5 pin, 6 Amp including taking down old unsv socket complete all as directed. Make: Anchor, Legrand, Havells.

S&F in repairs socket out let, multipurpose, 2 in 1 5 pin, 16 Amp with fuse and neon indicator including taking down old unsv socket complete all as directed. Make: Anchor, Legrand, Havells.

S&F in repairs Electronic step rotary type fan regulator 1000 watt 230 volts AC 50 Hz including taking down old unsv fan regulator complete all as directed. Make: Anchor, Legrand, Havells, Bajaj, USHA

S &F in repairs Bakelite sheet cover 3 mm thick cut as required shape and size including brass screws and cup washer off following size for mounting swich, socket fan regulator etc including taking down existing unserviceable bakelite sheet cover complete all as directed. Make: Hylam, Woodlite,Anchor

S & F in repairs1100 volts grade heavy duty twin flat cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed including taking down unserviceable cable complete all as directed. Make: Finolex, Polyacab, Havells, Bonton

S & F in repairs single phase electronic meter temper proof LCD display with polycarbonted cover 230volt ,10 A to 60 Amps ,accuracy class-I 50 Hz ,confirming to IS 13779,ip-54 with parameter to show data time ,current reading ,load PF ,voltage and KWH including taking down unserviceable complete all as directed. Make:LEGRAND, L&T, Secure.

S & F in repairs flexible cable 3 core 23/0.0076 multi stranded copper conductor white/ black colour code including taking down unserviceable complete all as directed. Make: Finolex, Polyacb, Havells, Bonton

Supply and fix in repairs Exhaust fan 300 mm sweep, 1200 RPM, ,made up of Sturdy Engineering Plastic complete ,voltage 230 Volts ,50 Hz, energy saving model single phase copper wound motor, white in colour complete with blade, box type louvers etc including taking down old unsv exhaust fan complete all as specified and directed. Make : Bajaj/Havells /Crompton

S & F in repairs Circuit/submain wiring with single core FR-LSH PVC insulated copper multi stranded conductor cable drawing into existing PVC rigid conduit in surface/concealed as required, including taking down unserviceable existing wiring etc complete of following sizes as directed. Make: Finolex, Havells, Gloster, Grandlay, Bonton

S & F in repairs pressed steel sunken terminal boxes 1.6 mm thick, 60 mm including brass screws and cup washer of following size for mounting switch, socket fan regulator etc including taking down existing the existing unserviceable sunken terminal boxes complete all as directed.

Material and labour for Earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. Note: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.

Supply and fix in repair Rigid non metalic PVC conduit of , inclusive of boxes (junction/terminal)but inclusive of all tees,bend ,elbow reducers, bell mouth tube ends and fixing acessories such as couplers,lock,nut saddles,pipe hooks including taking down old unsv pvc conduit all as specified and directed. Make of conduit: Finolex, Modi, Asian, Jindal

40mm dia

32mm dia

25mm dia

20mm dia

Supply and fix in repair PVC rectangular block for mounting Switch,Socket,fan regulator etc. with 3mm thick plastic laminated sheet cover of size s including taking down old unsv rectangular block all as directed.

100mmx100mm and 50mm deep

175mmx100mm and 50mm deep

Supply and Fixing in repair LED Batten light fittings on walls including brackets all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-20/22 watts/total system lumen not less than 2200 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 5700( COOL DAY LIGHT) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 20000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2.5KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheets conforming of technical spscifications. Make: - PHILIPS CAT No. BN021-LED 22S PSU CW GR /WIPRO/EVEREADY Cat No. LEDBTA020I6-02

Supply and Fixing LED Batten light fittings 2 Feet on walls including brackets all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-10/12 watts/total system lumen not less than 1200 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 5700(COOL DAY LIGHT) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 20000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheets report conforming of technical spscifications . Make: - PHILIPS CAT No. BN021-LED 12S 6500 PSU GR /WIPRO/EVEREADY Cat No. LEDBTA010I6-02

Supply and Fixing LED Suspended Batten light fittings on walls including brackets ,all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-34 watts/total system lumen not less than 4000 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 115lm/watt. (ix) Colour temperature (K): - Not less than 6500 ( COOL DAY LIGHT) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 35000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-270V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2.5KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS CAT No. BN100-LED 40S PSUL120 GR //WIPRO/EVEREADY CAT No.

Supply and Fixing LED Up Down twin glow 20W+20W Batten light fittings on walls including brackets , all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-20 watts/total system lumen not less than 2000 lm on each side (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating: - IP 20 (v) Mounting: - Wall Mounted (vi) Finish: - Polycarbonated diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 6500 on Down Side & 3000K on Up Side( COOL DAY AND WARM WHITE LIGHT) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 35000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 160-360V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2.5 KV (xv) Heat Shink: - As per OEM's design (xvi) (a). Bidder has to compulsorily submit the data sheet report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS/WIPRO/EVEREADY

Supply and Fixing LED 1 x 1 feet Surface/ceiling Mounted light fittings including brackets all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-20 watts/total system lumen not less than 1600 lm on each side (ii) Housing: - CRCA (iii) IP Rating: - IP 20 (v) Mounting: - Surface/Ceiling Mounted (vi) Finish: - Opal PMMA Diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 80 lm/watt. (ix) Colour temperature (K): - Not less than 6500( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 35000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-27V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheet report conforming of technical spscifications. Make: - PHILIPS Cat No. SM200C LED 16S 6500 PSU OD WH /CG/WIPRO/EVEREADY

Supply and Fixing LED street/Security light fittings on poles/wall including mounting brackets all as conforming to the following parametersincluding taking down old unsv Light fitting : - (i) Syatem watt/Lumens: - Max-25 watts/total system lumen not less than 3000 lm (ii) Housing: - Single Piece High pressure die cast aluminium. (iii) IP Rating & IK Rating: - IP 66 & IK07 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - Suitable for pole mounting with bracket arm 40-50mm dia, Mounting height- 5.50m to 6.50 m from GL. (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 120 lm/watt. (ix) Colour temperature (K): - Not less than 5700 (x) Color Rendering Index (CRI): - Not less than 70 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - Spread (Beam angle along the driveway) - 120°, Through (Beam angle across the driveway)- 60°, Beam pattarn- Asymmetrical driveway. (xiii) Control gear: - inbuilt electronic driver with 325V Auto Cut off Restart feature & 440V Phase to Phase protection till 8 hour, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence.Also submit BIS of Luminair and drivers Make: - PHILIPS Cat No BRP046 LED30 CW MR S1 PSU GR/WIPRO/CROMPTON/EVEREADY

Supply and Fixing LED 2x2 Recessed Mounted fittings on armstrong/Geypsum Ceiling including taking down old unsv recess mounted fitting all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 30 watts/total system lumen not less than 3600lm (ii) Housing: - Single Piece CRCA body (iii) IP Rating & IK Rating: - IP 20 & IK20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On Armstrong as well as geypsum ceiling. (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 120 lm/watt. (ix) Colour temperature (K): - Not less than 6500( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - Spread (Beam angle along the driveway) - 120°, Through (Beam angle across the driveway)- 60°, Beam pattarn- Asymmetrical driveway. (xiii) Control gear: - inbuilt electronic driver with 325V Auto Cut off Restart feature, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence.Also submit BIS of Luminair and drivers. Make: - PHILIPS Cat No RC380B LED36S 6500 G6 L60 W60 PSU OD/WIPRO/CROMPTON/EVEREADY

Supply and Fixing LED Round/Square Surface Mounted Downlighter fittings on surface/Ceiling including taking down old unsv light fitting all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 18 watts/total system lumen not less than 2000 lm (ii) Housing: - Single Piece body (iii) IP Rating & IK Rating: - IP 20 & IK20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On surface/ceiling (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 110 lm/watt. (ix) Colour temperature (K): - Not less than 6500( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 30000 Hrs of operation. (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 20% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 2KV. (xv) Heat Shink: - As per OEM's design (xvi) (a). Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS Cat No SM 251 C LED 20S 6500 PSU WH/WIPRO/CROMPTON/EVEREDY

Supply and Fixing LED Round/Square Surface Mounted Downlighter fittings on surface/Ceiling including taking down old unsv down lighter all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 15 watts/total system lumen not less than 1500 lm (ii) Housing: - Single Piece body (iii) IP Rating & IK Rating: - IP 20 & IK20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On surface/ceiling (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 6500 Or not less 3000 (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 30000 Hrs of operation. (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 20% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 2KV. (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS SM 251 C LED 15S 6500 PSU WH/ECOLINK/WIPRO/CROMPTON/EVEREADY

Supply and Fixing LED Round Recessed Mounted Downlighter fittings including taking down old unsv led down lighter all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 15 watts/total system lumen not less than 1500 lm (ii) Housing: - Single Piece Aluminium die cast body (iii) IP Rating & IK Rating: - IP 20 & IK20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On Recessed ceiling (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 6500 or Not less than 3000 (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 50000 Hrs of operation. (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 2.5KV. (xv) Heat Shink: - As per OEM's design (xvi) (a). Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS CAT No DN 296 B LED15S 6500 PSU WH/WIPRO/CROMPTON/EVEREADY

Supply and Fixing LED Bulk Head fittings on surface/Ceiling including taking down old unsv led bulk head all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 10 watts/total system lumen not less than 1100 lm (ii) Housing: - Single Piece Aluminium die cast body (iii) IP Rating & IK Rating: - IP66 & IK09 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On surpace/ceiling (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 110 lm/watt. (ix) Colour temperature (K): - Not less than 6500 (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 50000 Hrs of operation at Ta 45*C (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 2.5KV. (xv) Heat Shink: - As per OEM's design (xvi) (a). Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS CAT NO WT202W LED10S CW PSU S2 PC/WIPRO/CROMPTON/EVEREADY

Supply and Fixing LED Flood Light fittings with complete fixting arrangemnets including taking down old unsv led flood light all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 50 watts/total system lumen not less than 5000 lm (ii) Housing: - Single Piece Aluminium die cast body (iii) IP Rating & IK Rating: - IP66 & IK07 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - With complete fixing arangement, (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 100 lm/watt. (ix) Colour temperature (K): - Not less than 6500 (x) Color Rendering Index (CRI) & SDCM: - Not less than 70, <5 (xi) Life: - Not less than 50000 Hrs of operation at Ta 45*C (xii) Optics: -Diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design (xvi) (a). Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS CAT NO. BVP180 LED50 CW PC WB 50W /ECOLINK/WIPRO/CROMPTON/EVEREADY

Supply and Fixing LED Flood Light fittings with complete fixting arrangemnets,including taking down old unsv LED flood light all as conforming to the following parameters: - (i) Syatem watt/Lumens: - Max 120 watts/total system lumen not less than 14500 lm (ii) Housing: - Single Piece Aluminium die cast body (iii) IP Rating & IK Rating: - IP66 & IK07 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - With complete fixing arangement, (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 120 lm/watt. (ix) Colour temperature (K): - Not less than 6500 (x) Color Rendering Index (CRI) & SDCM: - Not less than 70, <5 (xi) Life: - Not less than 50000 Hrs of operation at Ta 45*C (xii) Optics: -Diffused (xiii) Control gear: -Outcutt off @325V, 440V phase 2 phase protection, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence. Make: - PHILIPS CAT NO . BVP192LED145 CW NB FG GR PSU/ECOLINK/WIPRO/EVEREADY

Supply and fix in repair LED inverter bulb 9 watt retrofit type works on AC Normal mode and DC supply in inverter mode with inbuilt battery back up of up to 4 hours, high efficiency high lumens output ,including taking down old unsv led bulb complete all as specified and directed. Make: Crompton Cat Part No. LSL-6- WW or equivalemt in Philips/Wipro.

Supply and Fixing town glow LED Post Top fittings,including taking down old unsv led post top fitting all as conforming to the following parameters: - (i) System watt/Lumens: - Max-25 watts/total system lumen not less than 2800 lm (ii) Housing: - Single Piece High pressure die cast aluminium. (iii) IP Rating & IK Rating: - IP 66 & IK10 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - Suitable for pole mounting with bracket arm 40-50mm dia, Mounting height- 5.50m to 6.50 m from GL. (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 110 lm/watt. (ix) Colour temperature (K): - Not less than 5700 (x) Color Rendering Index (CRI): - Not less than 70 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - Polycarbonate Diffuser (xiii) Control gear: - inbuilt electronic driver with 325V Auto Cut off Restart feature, PF not less than 0.95 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - inbuilt surge protection minimum 4KV. (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence Make: - PHILIPS Cat No BGP300 LED28S 757 PSU PC IN S1 /CG/WIPRO/EVEREADY Cat No. LEDPOST025I3-01

Supply and Fixing LED Bollard fittings,including taking down old unsv led bollard fitting all as conforming to the following parameters: - (i) System watt/Lumens: - Max-8 watts/total system lumen not less than 300 lm (ii) Housing: - High pressure die cast aluminium. (iii) IP Rating & IK Rating: - IP 65 & IK10 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - On the surface (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 40 lm/watt. (ix) Colour temperature (K): - Not less than 3000 (x) Color Rendering Index (CRI): - Not less than 70 (xi) Life: - Not less than 25000 Hrs of operation @ Ta 35*C (xii) Optics: - Polycarbonate Diffuser (xiii) Control gear: - PF not less than 0.90 and THD less than 20% at full load with operating voltage 140-270V AC, 50 Hz. (xv) Heat Shink: - As per OEM's design (xvi) (a). Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence Note : Rate for Making PCC 30cm x 30cm foundation for mounting lights are to be inclusive in same rate Make: - PHILIPS Cat No BCP151 LED150/WW PSU 220-240 7043/CG /WIPRO/EVEREADY

S &F in repair brass board screw including washer of following size all as directed :-

1 " (Pack of 100screw )

1 1/2 "( Pack of 50 piece )

S & F in repair for PVC gitti of following size all as directed :-

35 x 8mm ( Pack of 100 piece )

50 x 8 mm ( Pack of 50 piece )

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volts grade crosectional area 6 sqmm 2 Core on wall/in PVC pipe or burried ground for making connection to Garden Lights,gate lights including taking down old unsv cable all as specified and directed. Make: POLYCAB/GEMSCAB/ Finolex/BONTON

Supply and fix in repairs Exhaust fan 250 mm sweep, 1200 RPM, ,made up of Sturdy Engineering Plastic complete ,voltage 230 Volts ,50 Hz, energy saving model single phase copper wound motor, white in colour complete with blade, box type louvers etc including taking down old unsv exhaust fan complete all as specified and directed. Make : BAJAJ/HAVELLS /CROMPTON

S & F in repairs wall mounted Fan 400mm sweep ,2100 RPM high speed and 105CMM Air Delivery,strudy base and thermal overload protection ,voltage 230 Volts ,50 Hz, energy saving model single phase copper wound motor, white in colour complete with blade, etc including taking down old unsv wall mounted fan complete all as specified and directed. Make : BAJAJ/HAVELLS /CROMPTON

Supply and Fixing LED 1 x 1 feet recess Mounted light fittings on recessed ceiling including brackets all as conforming to the following parameters including taking down old unsv Light fitting: - (i) Syatem watt/Lumens: - Max-18 watts/total system lumen not less than 1440 lm on each side (ii) Housing: - CRCA (iii) IP Rating: - IP 20 (v) Mounting: - recessed mounting (vi) Finish: - Opal PMMA Diffuser (vii) Lamp: - High bright LED (viii) System Efficacy (lm/W) of the luminaries: - Not less than 80 lm/watt. (ix) Colour temperature (K): - Not less than 5700( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 35000 Hrs of operation (xii) Optics: - Fully Diffused (xiii) Control gear: - inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-27V AC, 50 Hz (xiv) Surge protection: - inbuilt surge protection minimum 2 KV (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the data sheet report conforming of technical spscifications. Make: - Havells Cat No. pluto 1x1PLR18WLED857S /WIPRO/EVEREADY

Supply and Fixing LED 2x2 Surface Mounted fittings all as conforming to the following parameters including taking down old unsv fitting : - (i) Syatem watt/Lumens: - Max 35 watts/total system lumen not less than 3200lm (ii) Housing: - Single Piece CRCA body (iii) IP Rating & IK Rating: - IP 20 (iv) Front cover: - Polycarbonated Cover for More protection (v) Mounting: - surface mounted (vi) Finish: - Epoxy powder coated with any additional treatment for smooth and anti corrosive finish. (vii) Lamp: - High bright LED with Lens (viii) System Efficacy (lm/W) of the luminaries: - Not less than 90 lm/watt. (ix) Colour temperature (K): - Not less than 6500( COOL DAY WHITE ) (x) Color Rendering Index (CRI): - Not less than 80 (xi) Life: - Not less than 50000 Hrs of operation @ Ta 35*C (xii) Optics: - diffused (xiii) Control gear: - PF not less than 0.90 and THD less than 10% at full load with operating voltage 140-270V AC, 50 Hz. (xiv) Surge protection: - NA (xv) Heat Shink: - As per OEM's design (xvi) Bidder has to compulsorily submit the LM-79 and LM-80 and third party NABL accredited lab test report conforming of technical spscifications and consolidated lab report for the offered LED has to be stractured in the same sequence.Also submit BIS of Luminair and drivers. Make: - PHILIPS Cat No SM365LED32-6500 PSU OD WH /WIPRO/CROMPTON/EVEREADY

S & F in repairs Bulb LED 2.7 W, E-27 base,220v- 240v ,50 HZ all as specified and directed. Make : Havells, Wipro, Cromption, Philips.

S & F in repairs Bulb LED 3 W, E-27,220v- 240v ,50 HZ base all as specified and directed.Make : Havells, Wipro, Cromption, Philips.

S & F in repairs Bulb LED 5 W, E-14 base, 220v- 240v ,50 HZ ,including taking down old unsv led bulb all as specified and directed.Make : Havells, Wipro, Cromption, Philips.

S & F in repairs Bulb LED 9 W, E-27 base,220v- 240v ,50 HZ,including taking down old unsv led bulb all as specified and directed.Make : Havells, Wipro, Cromption, Philips.

S & F in repairs energy saving LED Bulb 14 W, E-27 base,220v- 240v ,50 HZ,including taking down old unsv led bulb all as specified and directed. Make : Havells, Wipro, Cromption, Philips.

S & F in repairs Bulb LED 5 W,MR-16,GU5.3 base,220v- 240v ,50 HZ including taking down old unsv led bulb all as specified and directed. Make : Havells, Wipro, Cromption, Philips.

S & F in repairs sheet metal enclosure, Triple pole and neutral with three pin and earth plug and socket with and including one triple pole MCB 32 Amps, 240 volts,10 KA , including taking down old unsv sheet metal enclosure complete all as directed. Make: Legrand, L&T, Schneider, C&S

KULDEEP SINGH